Introduction
This manual provides instructions for the UGREEN Magflow Air 10000mAh Qi2 15W Wireless Power Bank. Please read this guide carefully before use to ensure proper operation and to maximize the product's lifespan.
Key features include:
- Qi2 15W Magnetic Fast Charging
- 30W Two-Way Fast USB-C Charging (Input & Output)
- 10000mAh High Capacity Battery
- Built-in USB-C Cable that doubles as a carry strap
- Ability to charge up to 3 devices simultaneously
- Advanced safety protection with Thermal Guard temperature control and 13-layer protection
Setup
Initial Charging of the Power Bank
Before first use, fully charge your UGREEN Magflow Air power bank. Use the built-in USB-C cable or the USB-C port with a compatible power adapter (not included) to recharge the power bank.
Charging Steps:
- Connect the built-in USB-C cable or an external USB-C cable to the power bank's USB-C port.
- Connect the other end of the cable to a power adapter (e.g., 30W PD charger).
- The LED indicators will illuminate to show the charging progress. A full recharge typically takes approximately 2 hours with a 30W power adapter.
Image: The UGREEN Magflow Air power bank connected to a wall charger via its built-in USB-C cable, indicating a full recharge in 2 hours.
Operating Instructions
Qi2 15W Magnetic Wireless Charging
The power bank supports Qi2 15W magnetic wireless charging for compatible devices, such as iPhone 17/16/15/14 Pro Max models.
- Ensure the power bank is sufficiently charged.
- Align your Qi2-compatible device (e.g., iPhone) with the magnetic charging area on the power bank. The strong N52 magnets will ensure a secure and precise connection.
- Wireless charging will begin automatically. The magnetic wireless charging indicator LED will illuminate.
Image: An iPhone magnetically connected to the UGREEN Magflow Air power bank, illustrating 15W wireless fast charging.
Wired Charging (30W PD)
Use the built-in USB-C cable or the dedicated USB-C port for wired fast charging of your devices.
- Connect the built-in USB-C cable or an external USB-C cable to your device.
- Connect the other end of the cable to the power bank's USB-C port.
- Charging will commence automatically. The power bank supports up to 30W Power Delivery (PD) for fast charging compatible devices.
Image: The UGREEN Magflow Air power bank connected to an iPhone via its built-in USB-C cable, demonstrating wired charging.
Simultaneous Charging
The power bank can charge up to three devices concurrently (one wirelessly, two wired).
Note:
- When both wireless and wired charging are used simultaneously, wireless charging will be automatically disabled as the wired charging takes priority. To enable wireless charging again, click the power button.
- A watch charging module is sold separately and is not included with this power bank.
Image: The power bank charging an iPhone, AirPods, and a smartwatch simultaneously, demonstrating its multi-device charging capability.
Built-in Cable as Carry Strap
The integrated USB-C cable serves a dual purpose as a convenient carry strap. This design ensures you always have a charging cable readily available and makes the power bank easy to transport.
Image: The built-in USB-C cable being used as a carry strap, highlighting its durability and convenience.
Smart LED Indicator
The LED indicators on the power bank provide a quick visual reference for the remaining battery level and charging status.
| Indicator Status | Battery Level / Function |
|---|---|
| Four white LEDs flashing | 0 - 25% (less than 5% flashing rapidly) |
| One solid white LED, three flashing | 26 - 50% |
| Two solid white LEDs, two flashing | 51 - 75% |
| Three solid white LEDs, one flashing | 76 - 100% |
| Blue LED (next to white LEDs) | Magnetic Wireless Charging Indicator |
Image: A detailed view of the smart LED indicators on the power bank, explaining their meaning for battery level and magnetic wireless charging.
Maintenance
- Keep the power bank away from water, fire, and extreme temperatures.
- Avoid dropping or subjecting the device to strong impacts.
- Clean the surface with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Store the power bank in a cool, dry place when not in use for extended periods.
- For optimal battery health, fully charge and discharge the power bank at least once every three months if not used regularly.
Troubleshooting
Device Not Charging
- Check Power Bank Charge: Ensure the power bank itself has sufficient charge. Refer to the LED indicators.
- Cable Connection: Verify that the USB-C cable is securely connected to both the power bank and your device.
- Wireless Alignment: For wireless charging, ensure your device is correctly aligned with the magnetic charging area on the power bank.
- Device Compatibility: Confirm your device supports Qi2 wireless charging or USB-C Power Delivery.
- Simultaneous Charging Priority: If wired and wireless charging are both active, wired charging takes priority. Click the power button to re-enable wireless charging if needed.
Slow Charging
- Cable Quality: Use the built-in USB-C cable or a high-quality USB-C cable that supports fast charging.
- Power Adapter: When recharging the power bank, use a compatible fast charger (e-g., 30W PD adapter) for optimal speed.
- Device Input: Ensure your device supports the fast charging protocols provided by the power bank (e.g., 15W Qi2, 30W PD).
Power Bank Overheating
The UGREEN Magflow Air is equipped with Thermal Guard temperature control and 13-layer protection to prevent overheating. It is normal for the power bank to become slightly warm during operation, especially during fast charging.
- If the power bank becomes excessively hot, disconnect it from all devices and power sources immediately.
- Ensure adequate ventilation around the power bank during use. Avoid covering it.
- If overheating persists, contact customer support.
Image: An internal view highlighting the Thermal Guard technology, which monitors temperature 720,000 times per hour for safe operation.
Specifications
| Feature | Detail |
|---|---|
| Model Name | Ugreen MagFlow Air |
| Model Number | PB570 (75982) |
| Battery Capacity | 10000 Milliamp Hours (mAh) |
| Wireless Output | Qi2 15W |
| Wired Output/Input | Up to 30W Power Delivery (PD) via USB-C |
| Connector Type | USB Type C (built-in cable and port) |
| Compatible Devices | iPhone (MagSafe compatible), Qi-compatible Android devices, AirPods, etc. |
| Special Features | Slim design, Built-in USB-C cable/carry strap, Thermal Guard temperature control, 13-layer protection, Simultaneous charging |
| Dimensions (L x W x Thickness) | 111.5 x 69.8 x 13.9 mm (4.39 x 2.75 x 0.55 inches) |
| Weight | 213 Grams |
| Battery Type | Lithium Polymer (2 included) |
Image: The UGREEN Magflow Air power bank displaying its compact dimensions.
Warranty
This UGREEN Magflow Air power bank comes with a 1 Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the official UGREEN website or contact customer support.
Support
For further assistance, technical support, or inquiries regarding your UGREEN Magflow Air power bank, please contact UGREEN customer service through their official website or the contact information provided with your product packaging.
You can also visit the official UGREEN store on Amazon for product information and updates: UGREEN Store