BSNAW XL-613H Cordless Stick Vacuum Cleaner User Manual

Introduction

Thank you for choosing the BSNAW XL-613H Cordless Stick Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new vacuum cleaner. Please read it thoroughly before first use and keep it for future reference.

Safety Information

• Always ensure the vacuum is turned off before attaching or detaching accessories, cleaning, or performing maintenance.
• Do not use the vacuum cleaner to pick up water or wet substances, as this may cause electric shock or damage to the appliance.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
• Do not use without the dust cup and filters in place.
• Store the vacuum cleaner indoors in a dry place.
• Use only the charger supplied by the manufacturer to recharge the battery.

Package Contents

Your BSNAW XL-613H Cordless Stick Vacuum Cleaner package includes the following items:

• Main Motor Unit
• Motorized Brush Head
• Retractable Metal Tube (Extension Wand)
• 2-in-1 Brush Tool
• Crevice Nozzle
• Wall Mount Plate
• Adapter (Charger)
• HEPA Filter (extra included)
• Hair Cleaning Tool
• Screws for Wall Mount
• User Manual

Figure 1: All included components of the BSNAW XL-613H vacuum cleaner.

Setup

Assembly

1. Attach the Extension Wand: Insert the retractable metal tube into the main motor unit until it clicks securely into place.
2. Attach the Motorized Brush Head: Connect the motorized brush head to the other end of the extension wand until it clicks.
3. Alternative Configurations: For handheld use, attach the 2-in-1 brush tool or crevice nozzle directly to the main motor unit. The extension wand can also be adjusted for length by pressing the button on the back.

Figure 2: The vacuum can be configured in multiple ways for versatile cleaning.

Charging the Battery

The vacuum cleaner is equipped with a high-performance 6*2200mAh lithium-ion battery. It is advised to fully charge the battery before the initial and subsequent uses.

1. Connect the adapter to the charging port on the battery pack.
2. Plug the adapter into a power outlet.
3. The battery indicator lights on the main unit will show the charging status. A full charge typically takes approximately 4 hours.

Figure 3: The detachable battery offers up to 45 minutes of runtime and charges in 4 hours.

Operating Instructions

Power On/Off and Suction Modes

1. Power On: Press the power button on the main unit handle to turn on the vacuum cleaner.
2. Adjust Suction: The vacuum features two power levels. Press the '+' or '-' button on the handle to switch between standard mode (20000Pa) and max mode (30000Pa) for different cleaning needs.
3. Power Off: Press the power button again to turn off the vacuum cleaner.

Figure 4: The vacuum in action, demonstrating its powerful suction.

Using Attachments

The 8-in-1 versatile design allows for various cleaning tasks:

• Stick Vacuum: Use with the extension wand and motorized brush head for floors and carpets.
• Handheld Vacuum: Attach the 2-in-1 brush tool or crevice nozzle directly to the main unit for cleaning furniture, car interiors, or tight spaces.
• Extended Reach: Use the extension wand with the 2-in-1 brush tool or crevice nozzle for high areas like curtains or ceiling corners.

Cleaning Different Surfaces

The motorized brush head is designed for effective cleaning on various floor types:

• Hard Floors (Wood, Tile, Marble): The soft roller brush effectively picks up dust and debris without scratching surfaces.
• Carpets: The powerful suction and brush agitation work to lift dirt and pet hair from low-pile carpets. Note: Not suitable for shaggy carpets or carpets over 10mm in length.

Figure 5: The vacuum is suitable for various floor materials.

Figure 6: LED lights illuminate dark areas, and the flexible head allows for easy maneuverability.

Maintenance

Emptying the Dust Cup

The 1.2L dust cup features a one-touch dump design for easy and hygienic waste disposal.

1. Hold the main unit over a trash bin.
2. Press the dust cup release button to open the bottom flap and empty the contents.
3. Close the flap securely after emptying.

Figure 7: One-touch dust disposal for convenient cleaning.

Cleaning Filters

The vacuum features a fully sealed cyclone filtration system with a HEPA filter, stainless steel filter, and sponge filters. Regular cleaning is crucial for maintaining optimal suction and air quality.

1. Rotate the dust cup to remove it from the main motor unit.
2. Remove the HEPA filter, metal mesh filter, and sponge filter from the dust cup.
3. Tap filters gently to remove dust and debris.
4. Rinse the HEPA and mesh filters under running water. Note: Never immerse the main motor unit in water.
5. Allow all filter components to dry completely for at least 24 hours before reassembling.
6. Install the dry filters back into the dust cup and reattach the dust cup to the main unit.

Cleaning the Roller Brush

The V-shaped anti-tangle roller brush helps prevent hair from wrapping around it, but occasional cleaning may be necessary.

1. Ensure the vacuum is off and detached from the power source.
2. Press the release button on the side of the motorized brush head to open the side cover.
3. Carefully remove the roller brush.
4. Use the provided hair cleaning tool or scissors to remove any tangled hair or debris from the roller brush.
5. Reinsert the clean roller brush and close the side cover until it clicks.

Figure 8: Instructions for cleaning the filter and roller brush.

Figure 9: The V-shaped anti-tangle roller brush design.

Troubleshooting

Specifications

Warranty and Support

BSNAW prioritizes customer satisfaction and offers a lifetime customer service guarantee and exchange service. Enjoy a long-term warranty to maximize your satisfaction. For any issues with your vacuum cleaner, please contact BSNAW customer support for assistance.