Redragon K710 Wireless Mechanical Gaming Keyboard User Manual

Introduction

Thank you for purchasing the Redragon K710 Wireless Mechanical Gaming Keyboard. This keyboard combines a classic typewriter-inspired design with modern gaming features, offering versatile connectivity and customizable RGB lighting. Please read this manual carefully to ensure proper setup and operation.

Image: The Redragon K710 keyboard showcasing its retro design and vibrant RGB backlighting.

Package Contents

• Redragon K710 Wireless Mechanical Gaming Keyboard
• USB-C to USB-A Cable
• 2.4GHz USB Receiver
• Keycap Puller
• User Manual (this document)

Setup

1. Charging the Keyboard

Before first use, fully charge the keyboard using the provided USB-C cable. Connect the USB-C end to the keyboard and the USB-A end to a power source (e.g., computer USB port, USB wall adapter).

Image: The keyboard features a long-life rechargeable battery. The battery indicator shows charge level.

2. Connecting the Keyboard

The Redragon K710 supports three connection modes: 2.4GHz Wireless, Bluetooth 5.0, and Wired (USB-C).

Image: Overview of the keyboard's 3-mode connectivity: 2.4G, Bluetooth, and USB-C wired.

2.1. 2.4GHz Wireless Connection

1. Locate the switch on the side/back of the keyboard and slide it to the "2.4G" position.
2. Insert the 2.4GHz USB receiver into an available USB port on your computer.
3. Press and hold FN + R for 3 seconds. The LED indicator will flash rapidly, indicating pairing mode.
4. Once connected, the LED indicator will become solid green.

2.2. Bluetooth 5.0 Connection

The keyboard can store up to 3 Bluetooth devices.

1. Slide the switch on the side/back of the keyboard to the "BT" position.
2. Press and hold FN + Q, FN + W, or FN + E for 3 seconds to select a Bluetooth channel. The corresponding LED (Q, W, or E) will flash rapidly.
3. On your device (PC, smartphone, tablet, PS5), enable Bluetooth and search for "Redragon K710" (or similar name).
4. Select the keyboard to pair. Once connected, the LED for the selected channel will become solid blue.
5. To switch between paired Bluetooth devices, simply press FN + Q/W/E (short press).

2.3. Wired (USB-C) Connection

1. Connect the USB-C cable to the keyboard's port.
2. Connect the USB-A end of the cable to an available USB port on your computer.
3. The keyboard will automatically switch to wired mode. The LED indicator will show a solid red light.

Image: Rear view of the keyboard highlighting the 3-mode connection switch and USB-C port.

Operating Instructions

1. RGB Backlight Control

The keyboard features 20 preset RGB backlight modes and supports 7 single colors.

• FN + INS: Cycle through 20 backlight modes.
• FN + ↑ / ↓: Adjust backlight brightness (4 levels).
• FN + ← / →: Adjust backlight speed/direction.
• FN + DEL: Cycle through 7 single backlight colors (Red, Green, Blue, Yellow, Purple, Cyan, White).
• FN + PrtSc: Turn backlight ON/OFF.

Image: Examples of the various RGB lighting modes available on the Redragon K710 keyboard.

2. Function Keys (FN Combinations)

The keyboard includes multimedia and system control functions accessible via the FN key.

Image: Diagram illustrating the various FN key combinations for quick access to functions.

3. Customization Software & Macro Functions

For advanced customization, including individual key RGB settings, key remapping, and macro programming, download the dedicated software.

• Download Software: bit.ly/K710WDriver
• The software allows you to record complex sequences of key presses (macros) to execute with a single key, enhancing both gaming and productivity.

Image: Screenshot of the Redragon K710 customization software interface.

Maintenance

1. Cleaning

• Disconnect the keyboard before cleaning.
• Use a soft, damp cloth to wipe the surface of the keyboard. Avoid harsh chemicals.
• For dust and debris between keycaps, use compressed air or a small brush.

2. Keycap Replacement

The K710 features removable round keycaps. Use the included keycap puller for safe removal and replacement.

1. Gently place the keycap puller over the keycap you wish to remove.
2. Apply even pressure and pull upwards until the keycap detaches from the switch.
3. To replace, align the new keycap with the switch stem and press down firmly until it clicks into place.

Image: Detail of the retro round keycaps on the Redragon K710 keyboard.

Troubleshooting

• Keyboard not responding: Ensure the keyboard is charged. Check the connection mode (2.4G, BT, or Wired) and ensure it matches your device. For wireless, try re-pairing. For wired, try a different USB port.
• RGB lights not working: Ensure the backlight is turned on (FN + PrtSc). Check brightness levels (FN + ↑).
• Bluetooth connection issues: Ensure the keyboard is in Bluetooth mode and the correct channel (FN+Q/W/E) is selected. Remove the keyboard from your device's Bluetooth list and re-pair. Ensure your device's Bluetooth is enabled.
• 2.4GHz wireless issues: Ensure the keyboard is in 2.4GHz mode. Try moving the USB receiver to a different USB port or closer to the keyboard.
• Keys typing incorrectly: Perform a factory reset by holding FN + ESC for 5 seconds. If the issue persists, ensure the correct keyboard layout is selected in your operating system settings.

Specifications

Image: Visual representation of the battery level indicator system.

Warranty and Support

Redragon products come with a standard warranty. For specific warranty details and support, please refer to the warranty card included in your package or visit the official Redragon website.

For customer support regarding your Redragon K710 keyboard, please contact your retailer or the Redragon support team through their official channels. When contacting support, please have your product model (K710) and purchase information ready.

Image: The customization software, which can be used to optimize your keyboard experience.