ACEBELL Wireless WiFi 1080P Video Doorbell Camera with 7-inch Touch Screen Monitor User Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your ACEBELL Wireless WiFi 1080P Video Doorbell Camera and 7-inch Touch Screen Monitor. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

Package Contents

Verify that all items listed below are included in your package:

• Doorbell Camera
• 7-inch Touch Screen Monitor
• USB Type C Charging Cable
• Mounting Hardware (screws, anchors)
• User Manual
• Lithium Ion Batteries (pre-installed or separate)

Image: The ACEBELL Wireless Video Doorbell Camera (left) and the 7-inch Touch Screen Monitor (right) are displayed. A 32GB Micro SD card is shown below the monitor, and a hand holds a smartphone displaying the doorbell's live feed and app controls. This image illustrates the main components of the system.

Product Overview

The ACEBELL Video Doorbell System consists of two primary components:

• Doorbell Camera: This outdoor unit features a 1080p camera, motion sensor, microphone, speaker for two-way audio, and a doorbell button. It is battery-powered and connects wirelessly to the monitor and your home Wi-Fi network.
• 7-inch Touch Screen Monitor: This indoor unit serves as the primary interface for viewing live video, communicating with visitors, and managing system settings. It features a touch screen for intuitive control and an antenna for stable wireless connection to the doorbell.

Setup

1. Charging the Devices

Before initial use, fully charge both the doorbell camera and the monitor using the provided USB Type C cable. Connect the cable to the charging port on each device and a standard USB power adapter (not included). The charging indicator will show when charging is complete.

2. Doorbell Camera Installation

1. Choose a Location: Select a suitable location near your door, ensuring a clear view and good Wi-Fi signal strength.
2. Mounting: The doorbell camera supports self-adhesive installation. Clean the mounting surface thoroughly. Peel off the protective film from the adhesive backing and firmly press the doorbell camera onto the desired location. For a more secure installation, use the provided screws and anchors to mount the bracket, then attach the doorbell camera.
3. Power On: Ensure the doorbell camera is powered on after installation.

3. Monitor Placement

Place the 7-inch monitor in a central location within your home where it is easily accessible and has a good wireless connection to the doorbell camera.

4. App Installation and Pairing

1. Download the App: Search for "ACEBELL Video Door Phone" or scan the QR code (if provided in packaging) to download the official app on your smartphone or tablet.
2. Create Account: Open the app and follow the on-screen instructions to create a new user account.
3. Add Device: In the app, select "Add Device" or a similar option. Follow the prompts to connect your doorbell camera to your home's 2.4GHz Wi-Fi network.
4. Pair with Monitor: The doorbell camera and monitor are typically pre-paired. If not, refer to the monitor's on-screen menu for pairing instructions. This usually involves selecting a pairing option on both devices within a short timeframe.

Operating Instructions

1. Live View and Two-Way Audio

• From Monitor: Tap the screen to activate the live view from the doorbell camera. Use the on-screen microphone icon to initiate two-way audio communication with the visitor.
• From App: Open the ACEBELL app on your smartphone or tablet. Select your doorbell camera to view the live feed. Tap the microphone icon to speak and the speaker icon to listen.

2. Motion Detection

The doorbell camera is equipped with motion detection. When motion is detected, the system will:

• Send a notification to your smartphone/tablet via the app.
• Trigger a recording of the event (if a Micro SD card is installed in the monitor).
• Optionally, ring the indoor monitor.

Motion detection sensitivity can be adjusted in the app settings.

3. Answering a Doorbell Ring

• When a visitor presses the doorbell button, the indoor monitor will ring, and your smartphone/tablet will receive a call notification.
• On Monitor: Tap "Answer" on the screen to view the visitor and engage in two-way audio.
• On App: Accept the incoming call notification to view the live feed and communicate.

4. Video Recording and Playback

The system supports local storage via a Micro SD card (up to 32GB, included) inserted into the monitor. Recordings are triggered by motion detection or manual activation.

• Playback on Monitor: Access the "Playback" or "Gallery" option on the monitor's touch screen to review recorded videos.
• Playback on App: In the ACEBELL app, navigate to the "Playback" or "History" section to view cloud or local recordings.

Maintenance

• Battery Charging: The doorbell camera has a battery life of approximately 45 days, depending on usage. Recharge both the doorbell and monitor when the battery low indicator appears. Use the provided USB Type C cable.
• Cleaning: Wipe the camera lens and monitor screen with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Firmware Updates: Periodically check the ACEBELL app for available firmware updates to ensure optimal performance and security.

Troubleshooting

Specifications

Warranty and Support

For warranty information and technical support, please refer to the contact details provided in your product packaging or visit the official ACEBELL website. Keep your purchase receipt for warranty claims.

Manufacturer: ACEBELL