Introduction
Thank you for choosing the Electactic Water Dispenser with Ice Maker Function. This appliance provides convenient access to hot, cold, and ice water, designed for ease of use and reliability in your home or office. Please read this manual thoroughly before operation to ensure proper use and maintenance.
Safety Information
WARNING: To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using this appliance.
- Ensure the dispenser is placed on a stable, level surface.
- Do not operate the dispenser with a damaged cord or plug.
- Keep the appliance away from direct sunlight and heat sources.
- Do not immerse the appliance, cord, or plug in water or other liquids.
- Supervise children when they are near the dispenser, especially when dispensing hot water. Utilize the child safety lock feature.
- Only use potable water in the dispenser.
Setup
- Unpacking: Carefully remove the dispenser from its packaging. Inspect for any damage.
- Placement: Position the dispenser in a well-ventilated area, away from direct heat and sunlight. Ensure there is adequate space around the unit for air circulation. The compact design (11.82"D x 11.43"W x 32.94"H) allows for placement in kitchens, offices, or garages.
- Water Bottle Installation: This is a top-loading dispenser. Lift a standard 5-gallon water bottle and carefully place it onto the support collar at the top of the unit. Ensure the bottle is seated firmly.
- Initial Power-On: Plug the power cord into a grounded electrical outlet. Allow the unit to stand for at least 30 minutes before turning on the heating or cooling functions to allow refrigerants to settle.
Figure 1: Electactic Water Dispenser with Ice Maker Function.
Figure 2: The freestanding design fits 5-gallon top-loading water jugs, suitable for various spaces.
Operating Instructions
Control Panel Overview
The control panel is located on the top of the water cooler, featuring an LED touchscreen for easy operation.
Figure 3: Affordable Top-Load Coolers with Touch Control Panel, showing Cold Water Dispense, Child Lock, Hot Water Dispense, Power, and Add Water indicators.
Dispensing Water
- Cold Water: Press the 'Cold Water Dispense' button. The cold water temperature is approximately 59°F (15°C).
- Hot Water: To dispense hot water, first press and hold the 'Child Lock' button for 3 seconds to unlock. Then, press the 'Hot Water Dispense' button. The hot water temperature is approximately 194°F (90°C), suitable for tea or instant coffee.
Figure 4: The child safety lock prevents accidental hot water dispensing. Long press the safety lock for 3 seconds to activate/deactivate.
Ice Making Function
This water cooler features a built-in ice maker. It produces 9 bullet-shaped ice cubes in approximately 6-8 minutes, with a total daily capacity of up to 26 lbs of ice.
- Ensure the ice making function is enabled via the control panel.
- The ice is collected in the internal ice bin.
Figure 5: Tri-Temp Dispensing with individual switches for hot water, cold water, and the ice maker.
Figure 6: The ice maker produces 9 bullet ice cubes in 6-8 minutes, providing an endless supply of ice.
Empty Bottle Reminder
The control panel includes a warning light that indicates when the water bottle is running low and needs to be changed.
Maintenance
- Cleaning the Drip Tray: The dispenser features a removable drip tray for easy cleaning. Regularly remove and clean the tray to prevent spills and maintain hygiene.
Figure 7: A removable drip tray makes this cooler easy to keep clean.
- Draining the Unit: Periodically, it may be necessary to drain the water from the back of the unit, especially if the ice melts and fills the reservoir. Refer to the specific draining instructions in your full product manual for detailed steps.
- General Cleaning: Wipe the exterior of the dispenser with a soft, damp cloth. Do not use abrasive cleaners or solvents.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No hot/cold water | Power not connected; heating/cooling switch off; empty water bottle. | Check power connection; ensure heating/cooling switches are on; replace water bottle. |
| Ice maker not producing ice | Ice making function off; insufficient water; ambient temperature too high. | Ensure ice making is on; check water level; operate in a cooler environment. |
| Water tastes unusual | New bottle; unit needs cleaning. | Dispense a few cups of water to flush; clean the unit thoroughly. |
| Unit is noisy | Normal operation sounds (compressor, ice dropping); unit not level. | Ensure unit is on a level surface; some operational noise is normal. |
Specifications
- Brand: Electactic
- Model Number: HZB-15YLR
- Color: Black
- Capacity: 5 Gallons (water bottle)
- Product Dimensions: 11.82"D x 11.43"W x 32.94"H
- Item Weight: 33 pounds
- Hot Water Temperature: Approximately 194°F (90°C)
- Cold Water Temperature: Approximately 59°F (15°C)
- Ice Production: 9 bullet-shaped cubes in 6-8 minutes; up to 26 lbs daily
- Features: Top-loading, Child Safety Lock, LED Touchscreen Control, Empty Bottle Reminder, Removable Drip Tray
Warranty and Support
This Electactic product comes with a manufacturer's warranty. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your purchase or contact Electactic customer support directly.
If you encounter any issues or require assistance with your water dispenser, please contact the seller or manufacturer's customer support. Have your model number (HZB-15YLR) and purchase information ready for faster service.
