Introduction
The Langsdom AirWare Pro headphones are designed for active lifestyles, offering an open-ear experience that prioritizes comfort, awareness, and durability. Featuring an IP67 waterproof rating, 32GB of built-in MP3 storage, and up to 17.5 hours of battery life, these headphones are engineered to accompany you through various activities while keeping you connected to your surroundings.
Image: Langsdom AirWare Pro headphones in a vibrant purple color, showcasing their ergonomic design.
Key Features
- Open-Ear, Non-Intrusive Design: Enjoy audio while remaining aware of your surroundings, enhancing safety during outdoor activities.
- IP67 Dust & Water Resistant: Engineered to withstand sweat, rain, and dust, making them suitable for various environments.
- Ultra-Light 26g Build with Skin-Friendly Silicone: A memory titanium alloy frame wrapped in soft, skin-friendly silicone ensures a secure yet gentle fit for all-day comfort.
- Extended 17.5-Hour Battery Life: Provides long-lasting playback on a single charge, supported by advanced power management.
- Advanced Audio Performance: Features self-developed bass enhancement technology and conch-shaped directional sound transmission 5.0 for rich, full-bodied audio.
- Dual Device Connectivity: Seamlessly connect to two devices simultaneously for effortless switching.
- 32GB Built-In Memory & OTG Adapter: Store over a thousand songs directly on the headphones, eliminating the need for a phone during workouts. Supports MP3 format files with audio bit rate not exceeding 1000 kbps and file size less than 10MB.
Setup
1. Charging the Headphones
Before first use, fully charge your AirWare Pro headphones. Connect the magnetic charging cable to the charging port located on the right earpiece. The LED indicator will show red during charging and turn blue when fully charged.
Image: A close-up view of the magnetic charging pins on the right earpiece of the headphones, ready for connection to the charging cable.
2. Power On/Off
To power on, press and hold the multi-function button (usually the middle button) for approximately 3 seconds until you hear a voice prompt. To power off, press and hold the multi-function button for approximately 5 seconds.
3. Bluetooth Pairing
When the headphones are off, press and hold the multi-function button for about 5 seconds to enter pairing mode. The LED indicator will flash red and blue. On your device (smartphone, tablet, etc.), enable Bluetooth and select "Langsdom AirWave Pro" from the list of available devices. Once connected, the LED will stop flashing and you will hear a confirmation tone.
4. Loading Music to 32GB Internal Memory
The AirWare Pro features 32GB of built-in memory for phone-free music playback. To load music:
- Connect the magnetic charging cable to the headphones.
- Connect the USB-A end of the charging cable to your computer. If your computer only has USB-C ports, use the included USB Female to Type-C Male Adapter.
- The headphones will appear as a removable disk drive on your computer.
- Drag and drop your desired MP3 audio files into the designated music folder on the headphone's disk.
- Safely eject the disk from your computer before disconnecting the cable.
It is recommended to use MP3 format files with an audio bit rate not exceeding 1000 kbps and a file size less than 10MB.
Video: A demonstration of how to connect the Langsdom AirWave Pro headphones to a computer using the magnetic charging cable and transfer music files to its internal 32GB memory.
Operating Instructions
1. Button Controls
The headphones feature physical buttons for precise control:
- Multi-function Button (Middle): Power on/off, play/pause music, answer/end calls.
- Volume Up (+): Increase volume. Long press for next track.
- Volume Down (-): Decrease volume. Long press for previous track.
Image: A detailed diagram illustrating the location and functions of the physical buttons on the right earpiece of the headphones, including volume controls, power/play/pause, and track navigation.
2. Dual Device Connectivity
The AirWare Pro can connect to two Bluetooth devices simultaneously. This allows you to seamlessly switch between audio sources, such as your smartphone and a tablet or computer, without needing to disconnect and reconnect.
Image: The headphones are shown wirelessly connected to two different smartphones, illustrating the dual device connectivity feature.
3. MP3 Mode Operation
Once music files are loaded onto the 32GB internal memory, you can switch to MP3 mode for phone-free listening. Use the button controls to navigate between tracks (long press volume buttons) and manage playback (multi-function button). The headphones support both sequential and shuffle playback modes.
Maintenance
The Langsdom AirWare Pro headphones are designed for durability and ease of maintenance.
- Cleaning: Due to their IP67 dust and water resistance and skin-friendly silicone material, the headphones can be easily wiped clean with a damp cloth after intense workouts or exposure to dust. Ensure the charging port is dry before charging.
- Storage: When not in use, store the headphones in the provided storage bag to protect them from scratches and dust.
Image: A person wearing the headphones while water is being poured over their head, demonstrating the IP67 waterproof feature.
Troubleshooting
- No Power: Ensure the headphones are fully charged.
- Cannot Pair: Make sure the headphones are in pairing mode (flashing red and blue LED). Turn off and on your device's Bluetooth and try re-pairing.
- Low Sound Volume/Quality: Adjust the volume on both the headphones and your connected device. Ensure the earpieces are positioned correctly over your ears. In noisy environments, open-ear headphones may have reduced perceived volume compared to in-ear models.
- MP3 Files Not Playing: Verify that the audio files are in MP3 format, have a bit rate not exceeding 1000 kbps, and a file size less than 10MB. Ensure files were transferred correctly to the internal memory.
- Uncomfortable Fit: While the headband is not adjustable, the flexible silicone design should conform to most head shapes. Experiment with positioning for optimal comfort.
Specifications
| Feature | Detail |
|---|---|
| Model Name | AirWare Pro (BE19) |
| Connectivity Technology | Wireless (Bluetooth 5.4) |
| Earpiece Shape | Open-Ear |
| Water Resistance Level | IP67 Waterproof |
| Built-in Memory | 32GB |
| Battery Life | Up to 17.5 Hours |
| Item Weight | 26 grams (0.9 ounces) |
| Bluetooth Range | 10 Meters |
| Noise Control | None (Open-Ear Design) |
| Control Type | Button Control |
| Recommended Uses | Running, Cycling, Exercising, Hiking, Travel |
What's in the Box
Your Langsdom AirWare Pro package includes:
- Langsdom AirWave Pro Headphones
- Magnetic Charging Cable (also functions as a data cable)
- USB Female to Type-C Male Adapter
- Adjustable Lanyard
- A Storage Bag
Image: An overview of the items included in the product packaging: the AirWave Pro headphones, magnetic charging cable, USB-C adapter, adjustable lanyard, and a storage bag.
Warranty & Support
For product support, troubleshooting assistance, or warranty inquiries, please refer to the contact information provided in the user manual included with your product. Additionally, protection plans are available for purchase separately to extend coverage for your device.
- 2-Year Protection Plan
- 3-Year Protection Plan
- Complete Protect: Monthly plan covering eligible past and future purchases.
