1. Introduction
Thank you for choosing the CableCreation Active USB 3.0 Extension Cable. This 5-meter (16.4 ft) active extension cable is designed to extend the reach of your USB 3.0 devices without signal degradation, ensuring reliable data transfer and power delivery over longer distances. It features an integrated signal booster to maintain optimal performance.
2. Key Features
- Active Signal Booster: Equipped with an NXP chip to prevent signal attenuation over long distances.
- High-Speed Data Transfer: Supports USB 3.0 data speeds up to 5 Gbps.
- Extended Reach: Provides 5 meters (16.4 feet) of extension for your USB devices.
- Durable Construction: Features gold-plated connectors, molded strain relief, tinned copper conductor, aluminum foil shielding, earth wire, braided shielding, and a PVC jacket for enhanced durability and performance.
- Plug and Play: No drivers required for installation.
Figure 1: Illustrates the 5-meter length of the active extension cable, providing ample reach for various setups.
3. Compatibility
This active USB 3.0 extension cable is designed for use with USB 3.0 peripherals and transfers USB 3.0 signals. It is compatible with a wide range of devices, including:
- Desktop Computers
- Laptops
- Televisions
- VR Headsets (e.g., Oculus Rift, Oculus Quest, HTC Valve Index)
- Cellphones (for data transfer, if USB-A compatible)
- Flash Drives
- Gamepads
- External Hard Drives (requires additional power source for the HDD)
- CCTV Cameras
- Scanners
- Printers
Important Note:
- This cable is specifically for USB 3.0 peripherals and signals. It is not compatible with USB 2.0 devices for data transfer.
- For connecting USB-C devices, CableCreation recommends specific USB-C compatible products (e.g., B08RMLWVL6, B08RN2VMCC) for optimal performance.
Figure 2: Universal compatibility with various USB 3.0 devices.
4. Setup Instructions
- Identify Connectors: The cable has a USB Type-A Male connector (Host) and a USB Type-A Female connector (Device).
- Connect to Host: Plug the USB Type-A Male end of the extension cable into an available USB 3.0 port on your computer, laptop, or other host device.
- Connect Device: Plug your USB 3.0 peripheral (e.g., VR headset, printer, flash drive) into the USB Type-A Female end of the extension cable.
- External Power for HDDs: If connecting an external hard drive, ensure the hard drive has its own additional power source. The extension cable itself does not provide sufficient power for unpowered external HDDs over long distances.
Figure 3: Connecting the extension cable to a laptop and an external hard drive. Note the requirement for an external power supply for the hard drive.
5. Operating Instructions
The CableCreation Active USB 3.0 Extension Cable operates on a plug-and-play basis. Once connected correctly, your operating system should automatically detect the connected device. No additional drivers are required for the extension cable itself.
- Ensure both ends of the cable are securely plugged in.
- Verify that your connected device is powered on and functioning correctly.
- For optimal performance, connect to a USB 3.0 port on your host device.
Figure 4: Extending VR headset connectivity for an immersive gaming experience.
6. Maintenance
To ensure the longevity and optimal performance of your CableCreation Active USB 3.0 Extension Cable, follow these simple maintenance guidelines:
- Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid sharp bends, kinks, or excessive pulling on the cable, especially near the connectors.
- Cleaning: Use a soft, dry cloth to gently wipe the cable and connectors. Do not use liquid cleaners or solvents.
- Protection: When not in use, consider coiling the cable loosely and securing it with a cable tie to prevent tangling and damage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| External hard drive not functioning. | Insufficient power for the HDD. | Ensure the external hard drive has its own additional power source. Voltage can attenuate over long cable lengths. |
| Device not detected or slow transfer speeds. | Connected to a USB 2.0 port or device is USB 2.0. | This cable is designed for USB 3.0 peripherals and signals only. Ensure both the host port and the connected device are USB 3.0 compatible. |
| Cable not recognized by the system. | Loose connection or temporary system glitch. | Ensure both ends of the cable are securely connected. Try restarting your computer or reconnecting the cable. No drivers are required for this cable. |
| VR headset connectivity issues. | Specific VR headset requirements or USB-C connection. | While generally compatible, for USB-C VR headsets, CableCreation recommends specific USB-C compatible products (e.g., B08RMLWVL6, B08RN2VMCC). Ensure your VR headset is properly configured. |
8. Specifications
- Model Number: CD0034
- Cable Length: 5 meters (16.4 feet)
- Connector Type: USB Type-A Male to USB Type-A Female
- USB Standard: USB 3.0
- Data Transfer Rate: Up to 5 Gbps
- Special Features: Active Signal Booster (NXP chip), Gold-plated connectors, Molded Strain Relief
- Manufacturer: CableCreation
- Country of Origin: China
9. Warranty Information
CableCreation stands behind its products with a 24-month warranty for any quality-related concerns. Please retain your proof of purchase for warranty claims.
10. Customer Support
Should you encounter any issues or require assistance with your CableCreation Active USB 3.0 Extension Cable, our dedicated support team is ready to help. Please visit the official CableCreation brand store or contact us through the retailer where you purchased the product.
For more information and product details, you can visit the CableCreation Brand Store.