SOBERNA A3 Wireless Earbuds User Manual

Important Safety Information

Please read all safety warnings and instructions carefully before using this product. Keep this manual for future reference.

• Do not expose the earbuds or charging case to extreme temperatures, humidity, or liquids.
• Avoid dropping, impacting, or disassembling the device.
• Do not use abrasive cleaners or harsh chemicals to clean the earbuds.
• Prolonged exposure to high volume levels may cause permanent hearing damage. Adjust volume to a moderate level.
• Keep out of reach of children and pets.
• Dispose of the product responsibly according to local regulations.

Product Overview

The SOBERNA A3 Wireless Earbuds are designed for high-quality audio and convenient use. This section provides an overview of the components.

Image: The SOBERNA A3 Wireless Earbuds are shown inside their charging case. The case features a digital LED display indicating battery levels for both the case and individual earbuds. The earbuds themselves are black with a sleek design, and one earbud shows a blue fingerprint icon indicating its touch control area.

Components:

• Left Earbud (L): For left ear, features touch control.
• Right Earbud (R): For right ear, features touch control.
• Charging Case: Stores and charges earbuds, with an integrated LED display.
• LED Digital Display: Shows battery percentage of the charging case and charging status of individual earbuds.
• Touch Control Area: Located on the outer surface of each earbud for various functions.
• USB Charging Port: Located on the charging case for recharging the case battery.

Setup

1. Initial Charging

Before first use, fully charge the charging case and earbuds.

• Connect the charging case to a USB power source using the provided charging cable. The LED display on the case will show the battery percentage increasing.
• Place both earbuds into the charging case. Ensure they are correctly seated; the LED indicators for the earbuds on the case display will light up, indicating they are charging.
• Allow approximately 1-2 hours for a full charge. The case display will show "100" when fully charged.

2. Pairing with Your Device

The earbuds will automatically enter pairing mode when removed from the charging case.

1. Ensure your device's Bluetooth is turned on.
2. Open the charging case and remove both earbuds. They will automatically power on and attempt to pair with each other.
3. On your device, search for Bluetooth devices and select "A3" from the list.
4. Once connected, your device will confirm the pairing, and the earbud indicator lights (if any) will turn off or flash slowly.

Re-pairing / Single Earbud Use:

• If only one earbud connects, place both back into the case, close the lid, wait a few seconds, then remove them again.
• To use a single earbud, simply remove one from the case. It will automatically connect if previously paired.

Operating

1. Power On/Off

• Power On: Remove earbuds from the charging case. They will power on automatically.
• Power Off: Place earbuds back into the charging case. They will power off automatically and begin charging.

2. Touch Controls

The SOBERNA A3 earbuds feature intuitive touch controls on the outer surface of each earbud.

3. Wearing the Earbuds

For optimal sound quality and comfort, ensure the earbuds are properly seated in your ears.

• Identify the Left (L) and Right (R) earbuds.
• Gently insert each earbud into the corresponding ear canal.
• Rotate the earbud slightly until it feels secure and comfortable, forming a good seal for better bass response and noise isolation.

Maintenance

1. Cleaning

• Regularly clean the earbuds and charging case to maintain performance.
• Use a soft, dry, lint-free cloth to wipe the surfaces of the earbuds and charging case.
• For earwax or debris in the ear tips or speaker mesh, use a dry cotton swab or a small, soft brush. Do not use liquids.
• Clean the charging contacts on both the earbuds and inside the case with a dry cotton swab to ensure proper charging.

2. Storage

• When not in use, always store the earbuds in their charging case to protect them and keep them charged.
• Store the product in a cool, dry place, away from direct sunlight and extreme temperatures.

3. Battery Care

• To prolong battery life, avoid fully discharging the earbuds and charging case frequently.
• If the product will not be used for an extended period, charge it at least once every three months.

Troubleshooting

If you encounter issues with your SOBERNA A3 Wireless Earbuds, try the following solutions:

Specifications

Warranty and Support

SOBERNA products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty from the date of purchase. Please refer to the specific warranty terms provided with your purchase documentation or contact the seller for details.

For technical support or customer service inquiries, please contact the seller directly through the platform where the product was purchased. Please have your order number and product model (A3) ready when contacting support.

Note: Warranty terms may vary by region and retailer.