Introduction
The ECOMAX EM18910P-3 is a versatile 3-in-1 wet/dry shop vacuum designed for efficient cleaning in various environments, including homes, car interiors, and workshops. This compact and lightweight unit offers powerful suction for both dry debris and liquid spills, and can also function as a blower to clear away dust and light materials. Please read this manual thoroughly before operating the vacuum to ensure safe and effective use.
What's Included
Your ECOMAX EM18910P-3 package includes the following components:
- 1 x ECOMAX 3-Gallon Wet/Dry Shop Vacuum Unit
- 1 x 1-1/4" x 4' Hose (Model 20-1300)
- 1 x Gulper Nozzle (Model 13-1588)
- 1 x Crevice Nozzle (Model 13-1513)
- 1 x Foam Filter (Model 25-1202) - for wet use
- 1 x Reusable Dry Filter with Clamp Ring (Model 25-1201) - for dry use
This image displays the ECOMAX EM18910P-3 shop vacuum along with all standard accessories: a foam filter, a gulper nozzle, a crevice nozzle, the main hose, and a reusable dry filter with a clamp ring. These components are essential for various cleaning tasks.
Setup
1. Unpacking and Initial Inspection
Carefully remove all components from the packaging. Inspect the vacuum and accessories for any signs of damage. Ensure all listed components are present.
2. Filter Installation
- For Dry Vacuuming: Install the reusable dry filter with the clamp ring. Ensure it is securely fastened over the filter cage.
- For Wet Vacuuming: Remove the dry filter. Install the foam filter over the filter cage. Do not use the dry filter for wet vacuuming.
3. Hose and Accessory Connection
Attach the hose to the vacuum's intake port for vacuuming or to the exhaust port for blower function. Securely attach the desired nozzle (gulper or crevice) to the end of the hose.
4. Power Cord Management and On-Board Storage
The power cord can be wrapped around the handle for neat storage. The vacuum features on-board storage loops for the crevice nozzle and gulper nozzle, keeping them readily accessible.
This image provides a detailed view of the ECOMAX EM18910P-3, with labels indicating key features such as the sturdy handle for easy carrying, the large water-resistant ON/OFF switch, the powerful 3.0 Peak HP motor, the quick-connect locking vacuum port, the durable 3-gallon poly tank, large lid latches for secure closure, and the integrated blower port.
Operating Instructions
1. Dry Vacuuming
Ensure the reusable dry filter is correctly installed. Connect the hose to the intake port. Use the gulper nozzle for general cleaning of larger areas or the crevice nozzle for tight spaces like car seats, dashboards, or workshop crevices. Plug the unit into a power outlet and turn the water-resistant ON/OFF switch to the 'ON' position.
A person is shown using the ECOMAX EM18910P-3 shop vacuum with the gulper nozzle attachment to effectively clean dry debris, such as sawdust or dirt, from a wooden workbench surface.
2. Wet Vacuuming
Before wet vacuuming, remove the dry filter and install the foam filter. Connect the hose to the intake port. Use the gulper nozzle for picking up liquid spills. Turn the unit 'ON' and carefully vacuum the liquid. Do not overfill the tank. Empty the tank immediately after wet vacuuming.
This image illustrates the wet cleaning capability of the ECOMAX EM18910P-3. A person is using the gulper nozzle to vacuum a liquid spill from a wooden floor, demonstrating its effectiveness for liquid recovery.
3. Blower Function
To use the blower function, disconnect the hose from the intake port and connect it to the exhaust port located on the back of the vacuum. Ensure the area to be blown is clear of objects that could be damaged or cause injury. Turn the unit 'ON' to activate the blower.
This video demonstrates the ECOMAX EM18910P-3 3-in-1 shop vacuum in action, showcasing its dry vacuuming capabilities for car interiors and carpet, wet vacuuming for liquid spills, and its powerful blower function for clearing debris.
Maintenance
1. Emptying the Tank
Always unplug the vacuum before emptying. Release the lid latches and carefully remove the motor head. Dispose of collected debris or liquids responsibly. Clean the inside of the tank as needed.
2. Filter Cleaning and Replacement
- Reusable Dry Filter: Tap off loose dirt or rinse with water. Allow to air dry completely before reinstallation. Replace if torn or damaged.
- Foam Filter: Rinse with water and allow to air dry completely. Replace if torn or damaged.
Regularly check filters for wear and tear. Damaged or clogged filters can reduce performance and potentially damage the motor.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vacuum does not turn on | No power supply; Faulty switch | Check power cord connection and outlet; Ensure switch is in 'ON' position. |
| Low suction power | Clogged filter; Blocked hose/nozzle; Full tank | Clean or replace filter; Clear any blockages; Empty the tank. |
| Water/debris escaping exhaust | Incorrect filter for wet use; Tank overfilled | Ensure foam filter is installed for wet use; Do not overfill tank. |
Specifications
| Feature | Detail |
|---|---|
| Brand | ECOMAX |
| Model Name | EM18910P-3 |
| Capacity | 3 Gallons |
| Motor Horsepower | 3 Peak HP |
| Maximum Suction | 80 CFM (Cubic Feet per Minute) |
| Power Source | Corded Electric |
| Amperage | 8 Amps |
| Item Weight | 8.23 pounds |
| Product Dimensions | 16"L x 14.25"W x 18.81"H |
| Special Features | Corded, Lightweight, Portable, Wet/Dry, Blower Function |
| Filter Type | Foam, Reusable Dry Filter |
Warranty and Support
ECOMAX provides 12-month service support for your EM18910P-3 shop vacuum. Should you encounter any problems or have questions regarding your product, please refer to the contact information provided in the manual or reach out to us via email or hotline. We are committed to responding within 24 hours and providing satisfactory support.
For further assistance, please visit the ECOMAX Store on Amazon.
