1. Introduction
This manual provides detailed instructions for the safe and efficient operation of your Jesverty SPS-6005C DC Power Supply. This variable switching bench power supply offers a voltage range of 0-60V and a current range of 0-5A. Key features include an intelligent charging mode, 20W USB and Type-C quick-charge ports, encoder knobs for precise adjustments, an output switch, and a 4-digit LED display. Please read this manual thoroughly before use to ensure proper functionality and to prevent damage or injury.
The image displays the Jesverty SPS-6005C DC Power Supply, showcasing its compact design, digital display, and control knobs. The front panel features the main display, USB-A and USB-C ports, power button, and output terminals.
2. Safety Instructions
- Power Input: Before connecting the power supply to an AC outlet, ensure the voltage selector switch on the rear panel is set to the correct local voltage (115V or 230V). Incorrect voltage selection can damage the unit.
- Grounding: Always connect the power supply to a grounded outlet to prevent electric shock.
- Ventilation: Ensure adequate ventilation around the unit. Do not block the cooling fan or vents.
- Environment: Avoid operating the device in damp, dusty, or corrosive environments. Keep away from flammable materials.
- Output Connection: Always connect the load to the output terminals before activating the output. Ensure correct polarity.
- Overload Protection: Do not exceed the maximum rated voltage or current of the power supply. The Over-Current Protection (OCP) feature is designed to protect the load and the power supply from damage.
- Servicing: Do not attempt to repair or modify the unit yourself. Refer all servicing to qualified personnel.
3. Package Contents
Verify that all items are present and in good condition upon unpacking:
- 1 x SPS-C Unit (Jesverty SPS-6005C DC Power Supply)
- 1 x Power Cord
- 1 set of Test Leads (with alligator clips and banana plugs)
- 1 x Instruction Manual
4. Product Overview
The Jesverty SPS-6005C DC Power Supply features a user-friendly interface with a clear digital display and intuitive controls.
This diagram highlights the various components and controls of the power supply, including the display, knobs, buttons, and connection ports.
4.1 Front Panel Controls and Indicators
- Voltage Display: Shows the output voltage in Volts (V).
- Current Display: Shows the output current in Amperes (A).
- Power Display: Shows the output power in Watts (W).
- V-Coarse Knob: Adjusts the voltage value before the decimal point.
- V-Fine Knob: Adjusts the voltage value after the decimal point (0.01V resolution).
- A-Coarse Knob: Adjusts the current value before the decimal point.
- A-Fine Knob: Adjusts the current value after the decimal point (0.001A resolution).
- Power Button: Turns the unit ON/OFF.
- Output Control Button (OUT): Activates or deactivates the output terminals.
- CHG Button: Activates the Intelligent Battery Charging function.
- OCP Button: Activates/deactivates Over-Current Protection.
- USB-A Quick-Charge Port: 20W fast charging output.
- USB-C Quick-Charge Port: 20W fast charging output.
- Output Terminal + (Red): Positive output terminal.
- Output Terminal - (Black): Negative output terminal.
- Grounding Terminal (Green): Ground connection.
- CC Mode Indicator: Illuminates when Constant Current mode is active.
- CV Mode Indicator: Illuminates when Constant Voltage mode is active.
- CHG Mode Indicator: Illuminates when Intelligent Battery Charging is active.
- OCP Status LED: Illuminates when Over-Current Protection is active.
- OPN Status LED: Illuminates when Output Status Setting is active.
- Ah W Display: Shows real-time charging power (Ah) or wattage (W).
4.2 Rear Panel Features
- Cooling Fan: Temperature-regulated fan for efficient heat dissipation.
- Input Selectable Switch: Allows selection between AC115V and AC230V input voltage.
- AC Power Inlet: For connecting the power cord.
- Fuse Box: Contains the main fuse and a spare fuse.
5. Setup
- AC Voltage Selection: Before connecting the power cord, locate the Input Selectable Switch on the rear panel. Set it to match your local AC voltage (115V or 230V).
- Connect Power Cord: Plug the provided AC power cord into the AC Power Inlet on the rear panel and then into a grounded wall outlet.
- Power On: Press the green Power Button on the front panel. The LED display will illuminate, showing the last set voltage and current values.
6. Operating Instructions
6.1 Setting Voltage and Current
- Voltage Adjustment: Rotate the V-Coarse Knob to set the integer part of the voltage. Rotate the V-Fine Knob to set the decimal part of the voltage (0.01V resolution).
- Current Adjustment: Rotate the A-Coarse Knob to set the integer part of the current. Rotate the A-Fine Knob to set the decimal part of the current (0.001A resolution).
- Output Activation: After setting the desired voltage and current, connect your load to the output terminals. Press the OUT Button to activate the output. The display will show the actual output voltage, current, and power. Press OUT Button again to deactivate the output.
6.2 Intelligent Battery Charging
This image demonstrates how to connect a battery for charging, highlighting the various battery types supported.
- Connect the battery to the output terminals, ensuring correct polarity.
- Set the desired charging voltage and current limits using the encoder knobs.
- Press the CHG Button to activate the Intelligent Battery Charging function. The CHG indicator will illuminate.
- The display will show real-time charging power in Ampere-hours (Ah).
- The power supply will automatically stop charging when the battery reaches full capacity.
- Built-in reverse connection protection ensures a safe charging process.
6.3 USB-A & USB-C Quick-Charge
- The dedicated USB-A and USB-C ports provide 20W fast charging.
- These ports can be used to charge smartphones, power microcontrollers (e.g., Arduino UNO, Raspberry Pi), or other electronic modules.
- The USB charging function operates independently of the main DC output settings.
6.4 Over-Current Protection (OCP)
- Press the OCP Button to activate Over-Current Protection. The OCP Status LED will illuminate.
- If a short-circuit or over-current condition occurs in the load, the power supply will automatically cut off the output and the OCP indicator will flash.
- To restore output, resolve the fault condition and press the OUT Button.
6.5 Output Status Setting (OPN)
- The OPN function determines the output state upon powering on the unit.
- To set OPN, press and hold the OUT Button for 3 seconds. The display will show 'OPN' and a value (0 or 1).
- Rotate the V-Coarse Knob to select '0' (output OFF on power-up) or '1' (output ON on power-up).
- Press and hold the OUT Button again for 3 seconds to save the setting and exit.
7. Maintenance
7.1 Cooling Fan
The integrated cooling fan automatically adjusts its speed based on the internal temperature of the unit. Ensure the rear fan and side vents are clear of obstructions to maintain optimal cooling performance.
7.2 Fuse Replacement
If the power supply fails to power on or experiences an internal fault, the fuse may need replacement. The fuse box is located on the rear panel, integrated with the AC power inlet.
- Disconnect Power: Unplug the power cord from the AC power inlet and the wall outlet.
- Open Fuse Box: Use a small flat-head screwdriver to gently pry open the fuse compartment.
- Replace Fuse: Remove the blown fuse and replace it with a new fuse of the same specification (5 x 20mm T5/T8A). A spare fuse is provided in the fuse box.
- Close Fuse Box: Securely close the fuse compartment.
- Reconnect Power: Plug the power cord back in and test the unit.
8. Troubleshooting
If you encounter issues with your Jesverty SPS-6005C DC Power Supply, please consider the following:
- No Power: Check the power cord connection, the AC voltage selector switch on the rear, and the fuse. Replace the fuse if blown.
- No Output: Ensure the OUT button is pressed and the OCP indicator is not flashing. Check for short circuits or overloads in your connected device.
- Incorrect Voltage/Current: Verify settings using the coarse and fine encoder knobs. Ensure the display is functioning correctly.
- Overheating: Ensure the cooling fan and vents are not obstructed. Reduce the load if the unit is consistently running hot.
- Battery Charging Issues: Ensure the CHG function is activated and the battery is correctly connected with proper polarity.
For further assistance, please refer to the Warranty & Support section.
9. Specifications
| Feature | Value |
|---|---|
| Model | SPS-6005C |
| Output Voltage | 0-60V |
| Output Current | 0-5A |
| Amperage | 5 Amps |
| USB-A & Type-C Output | 20W Quick-Charge |
| Display | 4-Digit LED |
| Voltage Resolution | 0.01V |
| Current Resolution | 0.001A |
| Input Voltage | AC115V/230V ±5% (selectable) |
| Frequency | 50/60Hz |
| Dimensions | 7.1(D)x3.6(W)x6.2(H) inches |
| Weight | Approx. 2.5 lbs (1.14 kg) |
| UPC | 739807822361 |
This image provides a visual representation of the compact size and weight of the power supply, indicating its suitability for various workbench setups.
10. Warranty & Support
Jesverty provides professional technical support for its products. For any problems or questions regarding your order or the product, please feel free to contact Jesverty Customer Service.
- Contact Method: Via Amazon message or email (contact information typically found on the back of the instruction manual).
