Sundale Outdoor 51 Inch Rectangle Propane Fire Pit Table

Important Safety Information

Read all instructions before assembly and use of this fire pit table. Failure to follow these instructions could result in property damage, bodily injury, or death.

• This appliance is for outdoor use only. Do not use indoors.
• Keep children and pets away from the fire pit table at all times.
• Ensure the fire pit is placed on a level, non-combustible surface.
• Maintain a safe distance from combustible materials.
• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
• Always turn off the gas supply at the propane tank when the fire pit is not in use.
• Do not attempt to light the burner if the gas is flowing but no flame is present. Turn off the gas and wait 5 minutes before attempting to re-light.
• This product is CSA Certified, ensuring it meets applicable safety standards.

Package Contents

Verify that all components are present before beginning assembly:

• Fire Pit Table Unit
• Glass Wind Guard
• Decorative Fire Crystals
• Removable Lid
• Weatherproof Dust Cover
• Assembly Hardware and Tools (if applicable)
• Instruction Manual

Specifications

The fire pit table features a powder-coated steel frame with a metal-embossed woodgrain finish, designed for all-weather durability.

Setup

1. Unpacking and Assembly

Carefully remove all components from the packaging. Inspect for any damage. Follow the detailed assembly instructions provided in the separate assembly guide. Ensure all connections are secure before proceeding.

2. Propane Tank Connection

1. Locate the sliding tank holder mechanism on the side of the fire pit table.
2. Slide out the tank holder to access the propane tank compartment.
3. Place a standard 20-lb propane tank (not included) onto the holder. Ensure the tank is upright and stable.
4. Connect the regulator hose from the fire pit to the propane tank valve. Hand-tighten securely. Do not overtighten.
5. Push the sliding tank holder back into the fire pit table until it is fully closed and secured.
6. Perform a leak test: Apply a soapy water solution to all gas connections. Open the propane tank valve slowly. If bubbles appear, there is a leak. Close the tank valve immediately and re-tighten connections. Repeat the test. If leaks persist, do not use the fire pit and contact customer support.

Operating Instructions

1. Initial Setup and Placement

Ensure the fire pit is positioned on a stable, non-combustible surface, away from any overhead obstructions or combustible materials. The glass wind guard should be placed around the burner area.

2. Lighting the Fire Pit

1. Ensure the control knob on the fire pit is in the 'OFF' position.
2. Slowly open the valve on the propane tank fully.
3. Push and hold the control knob in, then turn it counter-clockwise to the 'LOW' position.
4. While holding the knob in, press the igniter button repeatedly until the burner ignites. You should hear a clicking sound.
5. Once ignited, continue to hold the control knob in for 10-15 seconds to allow the thermocouple to heat up and engage the safety valve.
6. Release the control knob. If the flame goes out, repeat steps 3-5.

3. Adjusting the Flame

Once lit, rotate the control knob to adjust the flame height and heat output as desired, from 'LOW' to 'HIGH'.

4. Shutting Down the Fire Pit

1. Turn the control knob on the fire pit clockwise to the 'OFF' position.
2. Close the valve on the propane tank fully.
3. Allow the fire pit to cool completely before covering or moving.

5. Converting to Coffee Table

When not in use as a fire pit, the included removable lid can be placed over the burner area to transform it into a functional coffee table. Ensure the burner is completely cool before placing the lid.

Maintenance

1. Cleaning

• Ensure the fire pit is completely cool before cleaning.
• Wipe exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or harsh chemicals.
• Clean the burner and fire crystals periodically to remove debris.
• The glass wind guard can be cleaned with glass cleaner.

2. Storage

• When not in use, especially during extended periods or inclement weather, cover the fire pit table with the provided weatherproof dust cover.
• Store the propane tank in a well-ventilated area, away from direct sunlight and heat sources. Do not store the propane tank indoors.

3. Inspections

• Regularly inspect the hose and connections for signs of wear, cuts, or leaks. Replace damaged parts immediately.
• Check the burner ports for any obstructions.

Troubleshooting

If troubleshooting steps do not resolve the issue, contact customer support.

Product Videos

Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or contact Sundale Outdoor customer service directly. Keep your purchase receipt for warranty claims.

Manufacturer: Sundale Outdoor

Model Number: OIFT-003-GY