Bedsure Heated Blanket Electric Throw (Model BS-TH01-S)

1. Important Safety Instructions

Please read all instructions carefully before using your Bedsure Heated Blanket Electric Throw. Failure to follow these instructions may result in electric shock, fire, or injury.

• Do Not Use With Infants or Helpless Persons: This blanket is not suitable for use by infants, children, or any person insensitive to heat, or persons with poor blood circulation.
• Avoid Overheating: The blanket features a default 3-hour auto shut-off to prevent overheating. Do not use the blanket folded, bunched, or tucked in, as this may cause excessive heat concentration.
• Inspect Regularly: Regularly inspect the blanket, power cord, and controller for any signs of wear, damage, or malfunction. Do not use if damaged.
• Electrical Safety: Ensure the blanket is connected to a standard 120V AC wall outlet at 60Hz. Do not use with extension cords or power strips.
• Cleaning: Always disconnect the controller and power cord before cleaning. Follow the care instructions carefully.
• Pets: Keep pets away from the blanket to prevent damage to the heating elements.

2. Product Overview

The Bedsure Heated Blanket Electric Throw (Model BS-TH01-S) provides customizable warmth and comfort. It features a thick striped flannel top and a premium sherpa reverse for exceptional softness.

Key Features:

• Material: 290 GSM striped flannel top, 200 GSM premium sherpa reverse (100% Polyester).
• Dimensions: 50 inches (Length) x 60 inches (Width).
• Heat Settings: 6 adjustable heating levels.
• Timer Settings: 4 time settings (1, 2, 3, or 4 hours) with a default 3-hour auto shut-off.
• Safety: ETL and FCC certified with 74 safety tests, including overheat protection.
• Power: 100W, designed for standard 120V AC wall outlets at 60Hz.

3. Setup

1. Unpack: Carefully remove the heated blanket and controller from its packaging.
2. Connect Controller: Locate the connector on the blanket. Firmly plug the controller cable into this connector until it clicks into place.
3. Position Blanket: Spread the blanket evenly on your bed or sofa, ensuring no folds or creases.
4. Plug In: Plug the power cord from the controller into a standard 120V AC 60Hz electrical outlet.

4. Operating Instructions

The Bedsure Heated Blanket features an easy-to-use digital controller for personalized comfort.

• Power On/Off: Press the power button (⏻) to turn the blanket on or off. The display will illuminate when on.
• Adjust Heat Settings: Use the '+' and '-' buttons to cycle through the 6 heating levels (01 being the lowest, 06 being the highest).
• Set Timer: Press the timer button (◷) to select a desired auto shut-off time (1, 2, 3, or 4 hours). If no timer is set, the blanket will automatically shut off after 3 hours for safety.
• Pre-heating: For optimal warmth, turn on the blanket to your desired heat setting approximately 10-15 minutes before use.

5. Care and Maintenance

Proper care ensures the longevity and performance of your Bedsure Heated Blanket.

• Disconnect: Always disconnect the controller and power cord from the blanket before washing.
• Machine Wash: Machine wash on a gentle cycle with mild soap and cold water. Do not bleach.
• Drying: Tumble dry on low heat. Ensure the blanket is completely dry before reconnecting the controller or storing. Do not iron or dry clean.
• Storage: Store the blanket in a cool, dry place, loosely folded or rolled. Avoid placing heavy objects on top of the blanket during storage.

6. Troubleshooting

If you encounter any issues with your heated blanket, please refer to the following common solutions:

• Blanket Not Heating:
  • Ensure the power cord is securely plugged into a working electrical outlet.
  • Verify that the controller cable is firmly connected to the blanket.
  • Check if the power button on the controller is pressed and the display is illuminated.
• Uneven Heating:
  • Ensure the blanket is spread out flat and not folded or bunched during use.
  • Allow sufficient time (10-15 minutes) for the blanket to reach its set temperature.
• Controller Display Not Working:
  • Unplug the blanket from the wall outlet for 5 minutes, then plug it back in to reset the system.
  • Ensure the power outlet is functional by testing it with another appliance.

If the issue persists after attempting these steps, please contact Bedsure customer support.

7. Specifications

8. Warranty and Support

For warranty information and customer support regarding your Bedsure Heated Blanket Electric Throw, please refer to the product packaging or contact Bedsure customer service directly. Keep your purchase receipt for any warranty claims.