1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your FEELSO Filtered Handheld Shower Head. Designed to enhance your showering experience, this product features advanced water filtration, multiple spray modes, and a convenient one-touch pause function. Please read this manual thoroughly before use to ensure proper function and longevity of your shower head.
2. Safety Information
- Ensure all connections are tight to prevent leaks.
- Do not use excessive force when installing or adjusting the shower head.
- Always check water temperature before showering, especially for children or pets, to prevent scalding.
- Keep small parts away from children to avoid choking hazards.
3. Package Contents
Verify that all components are present in your package:
- Filtered Shower Head (with built-in filter cartridge)
- Stainless Steel Shower Hose
- Adjustable Shower Bracket
- Additional Teflon Tape
- Spare Rubber Washers (3 pieces)
- Installation Guide (this manual)
Figure 3.1: Included Components
Video 3.1: Unboxing and overview of the FEELSO Shower Head components.
4. Setup and Installation
The FEELSO Filtered Handheld Shower Head is designed for easy, tool-free installation on any standard G1/2" shower arm.
- Remove Old Shower Head: Unscrew your existing shower head from the shower arm. Clean any residue from the shower arm threads.
- Apply Teflon Tape: Wrap the provided Teflon tape clockwise around the threads of your shower arm 3-5 times.
- Connect Shower Bracket: Screw the adjustable shower bracket onto the shower arm. Hand-tighten firmly.
- Attach Shower Hose: Connect one end of the stainless steel shower hose to the shower bracket. Ensure a rubber washer is inside the hose connector. Hand-tighten.
- Attach Shower Head: Connect the other end of the shower hose to the handheld shower head. Ensure a rubber washer is inside the hose connector. Hand-tighten.
- Test for Leaks: Turn on the water and check all connections for leaks. If leaks occur, tighten connections slightly or reapply Teflon tape.
Figure 4.1: Visual guide for easy installation.
5. Operating Instructions
5.1 Spray Modes
Your FEELSO shower head offers 4 distinct spray modes to customize your shower experience. Rotate the dial on the shower head to switch between modes:
- Rainfall Mode: A gentle, wide spray for a relaxing shower.
- Mist Mode: A fine, soft mist for a soothing sensation.
- Mix Mode: A combination of rainfall and mist for balanced coverage.
- Power Wash Mode: Detach the shower head from its handle to activate a high-pressure jet for targeted cleaning.
Figure 5.1: Illustration of the 4 spray modes.
Figure 5.2: Power Wash Mode in action for cleaning.
Video 5.1: Demonstration of FEELSO shower head's various spray modes and features.
5.2 One-Touch Pause Button
The integrated one-touch pause button allows you to instantly stop the water flow without adjusting the temperature knobs. Press the 'STOP' button on the handle to pause, and press it again to resume water flow at the preset temperature. This feature is ideal for conserving water while shampooing, shaving, or bathing children and pets.
Figure 5.3: One-Touch Pause Button functionality.
Video 5.2: Demonstration of the ON/OFF switch for pet bathing and water conservation.
5.3 Gentle Massage Brush
The shower head features soft silicone nozzles that can also function as a gentle massage brush. Use it to massage your scalp, back, or legs for a relaxing and deep cleansing experience.
Figure 5.4: Gentle massage brush feature.
6. Maintenance
6.1 Filter Replacement
The FEELSO shower head includes a multi-stage filtration system designed to remove chlorine, heavy metals, and other impurities from your water. For optimal performance, the filter cartridge should be replaced every 4-6 months, depending on your local water conditions and usage.
Figure 6.1: Advanced Filtration System layers.
Video 6.1: Explanation of how hard water affects hair and skin, and the benefits of a filtered shower head.
6.2 Anti-Clog Nozzles
The upgraded silicone nozzles are designed to resist limescale and mineral buildup. To clean, simply rub your finger across the nozzles to dislodge any deposits. This self-cleaning design ensures consistent water flow and pressure without extensive maintenance.
Figure 6.2: Comparison of traditional vs. anti-clog silicone nozzles.
7. Troubleshooting
- Low Water Pressure: Check if the filter cartridge needs replacement. Ensure the hose is not kinked and all connections are tight. Verify that your home's main water supply is fully open.
- Leaks: Ensure all connections are hand-tightened. Reapply Teflon tape to threaded connections if necessary. Check that rubber washers are correctly seated in the hose connections.
- No Water Flow: Confirm the water supply is on. Check if the one-touch pause button is engaged.
- Clogged Nozzles: Rub the silicone nozzles with your finger to clear any mineral deposits.
8. Specifications
| Brand | FEELSO |
| Model Number | 62071QH-DY5 |
| Material | Acrylonitrile Butadiene Styrene, Stainless Steel |
| Finish Type | Painted |
| Installation Type | Wall Mounted |
| Number of Settings | 4 |
| Efficiency | 2.0 GPM (7.6 LPM) |
| Item Weight | 1.4 pounds |
| Product Dimensions | 10.1"L x 3.4"W |
9. Warranty and Support
FEELSO provides a lifetime warranty and professional technical support for this product. For any questions or assistance, please contact us through Amazon. Our customer service team is available 24 hours online and aims to reply within 24 hours.
Email: sales05@feelsolife.com
Figure 9.1: Customer support details.
