Dyson Purifier TP07 Cool Smart HEPA Purifying Fan User Manual

1. Introduction

The Dyson Purifier TP07 Cool is engineered to purify and cool your environment. It features a fully sealed filtration system with a HEPA filter designed to capture 99.97% of particles as small as 0.3 microns. Utilizing Air Multiplier technology, the device circulates purified air throughout the room, contributing to a cleaner and more comfortable indoor atmosphere.

This manual provides essential information for the proper setup, operation, and maintenance of your Dyson Purifier TP07 Cool.

Image 1.1: Dyson Purifier TP07 Cool Smart HEPA Purifying Fan in its retail packaging. The packaging highlights key features such as 'Purifies' and 'Cools you', along with 'HEPA H13 filtration'. The fan's sleek, tall design with a circular base and an elongated loop-shaped air outlet is visible.

2. Safety Information

Please read all instructions and safety warnings before using this appliance to prevent injury or damage. Retain this manual for future reference.

• Always unplug the appliance from the power outlet before cleaning or performing any maintenance.
• Do not use this appliance near water or in wet environments.
• Keep the appliance out of reach of children and individuals with reduced physical, sensory, or reasoning capabilities.
• Ensure the power cord is not damaged. If damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• Do not block air inlets or outlets.

3. What's in the Box

Verify that all components are present upon unpacking:

• Dyson Purifier TP07 Cool unit
• HEPA+Carbon filter (pre-installed or separate)
• Remote control
• Power cable

4. Setup

4.1 Filter Installation

1. Remove the outer cover of the filter unit by pressing the release buttons on either side.
2. If not already installed, place the HEPA+Carbon filter into the base of the unit. Ensure it clicks securely into place.
3. Reattach the outer cover, ensuring it is firmly closed.

4.2 Placement

Place the purifier on a stable, level surface. Ensure there is adequate space around the unit for optimal airflow, ideally at least 1 meter (3 feet) from walls or large objects.

4.3 Power Connection

Insert the power cable into the base of the unit and then plug it into a suitable mains power outlet.

5. Operating Instructions

5.1 Power On/Off

Press the power button on the unit or the remote control to turn the purifier on or off.

5.2 Fan Speed Adjustment

Use the fan speed button on the remote control to increase or decrease the airflow intensity (settings 1-10).

5.3 Oscillation Control

Press the oscillation button on the remote control to activate or deactivate the oscillation feature. The unit can oscillate up to 350 degrees.

5.4 Purification Modes

• Auto Mode: The purifier automatically senses air quality and adjusts airflow to maintain target air quality levels.
• Night Mode: Operates with the quietest settings and a dimmed display for undisturbed sleep.

5.5 Backward Airflow Mode

Activate this mode to purify the air without cooling you directly. Air is diverted through the back of the machine.

5.6 Timer Function

Set the sleep timer to automatically turn off the unit after pre-set intervals ranging from 30 minutes to 8 hours.

6. Connectivity

6.1 MyDyson App Connection

Download the MyDyson app from your device's app store. Follow the in-app instructions to connect your purifier to your home Wi-Fi network. This enables remote control and access to additional features.

6.2 Real-time Air Quality Reporting

The MyDyson app and the unit's LCD screen provide real-time updates on indoor air quality, including pollutant levels and temperature.

7. Maintenance

7.1 Filter Replacement

The unit's display or the MyDyson app will indicate when the filter needs replacement. Filter life varies based on usage and air quality. To replace:

1. Unplug the appliance.
2. Remove the outer cover and old filter.
3. Dispose of the old filter responsibly.
4. Install a new Dyson HEPA+Carbon filter, ensuring it clicks into place.
5. Reattach the outer cover.
6. Plug in the appliance and reset the filter life indicator via the app or remote control.

7.2 Cleaning the Exterior

Wipe the exterior of the unit with a soft, dry cloth. Do not use detergents or polishing agents. Ensure no water enters the air inlets or outlets.

8. Troubleshooting

If you encounter issues with your Dyson Purifier TP07 Cool, refer to the following common solutions:

• No Power: Ensure the power cable is securely plugged into both the unit and the wall outlet. Check if the outlet is functional.
• Poor Airflow: Check if the filter needs replacement. Ensure air inlets and outlets are not obstructed.
• Unit Not Responding: Try unplugging the unit for 30 seconds and then plugging it back in. Check the remote control batteries.
• App Connectivity Issues: Ensure your Wi-Fi network is active and the purifier is within range. Restart the app and try reconnecting.

For persistent issues or error codes not listed, contact Dyson customer support.

9. Specifications

10. Warranty and Support

For detailed warranty information, please refer to the official Dyson website or the warranty card included with your product. Dyson offers customer support for technical assistance, troubleshooting, and spare parts.

Contact Information: Please visit www.dyson.com for local support details.