SMALLRIG Wireless Camera Remote Control (Model 5207) Instruction Manual

1. Introduction

This manual provides instructions for the SMALLRIG Wireless Camera Remote Control, Model 5207. This device is designed to remotely control photography, video recording, focus, zoom, and custom functions on compatible Sony, Canon, and Nikon digital cameras. Using this remote can enhance your workflow and reduce post-production time by enabling remote operation.

2. Product Overview

The SMALLRIG Wireless Camera Remote Control offers a range of features for versatile camera operation.

2.1 Components and Controls

Figure 1: Modular Wireless Control Layout. This image illustrates the various buttons on the remote control, including the 'T' and 'W' buttons for zoom, the camera icon for focus/shutter release, the red dot for record, the 'ON/OFF' switch, and the 'C' button for custom functions.

• Zoom (T/W Buttons): Controls the zoom function on compatible lenses.
• Focus / Shutter-Release Button: Initiates autofocus and captures photos.
• Record Button: Starts and stops video recording.
• Power On / Off Switch: Activates or deactivates the remote control.
• Custom Functions (C Button): Assignable button for specific camera functions.

2.2 Key Features

• Wireless Connectivity: Utilizes Bluetooth for a reliable connection up to 10 meters (32.8 feet).
• Rechargeable Battery: Built-in lithium battery with USB-C charging, providing up to 40 hours of continuous operation after a 2.5-hour charge.
• Enhanced Mounting Options: Includes a skin-friendly silicone case, a wrist strap for secure handling, and a Velcro strap for attachment to hydraulic gimbal handles (19mm to 39mm diameter).
• Firmware Updates: Supports firmware updates via the SmallRig Up app for ongoing camera compatibility.

Figure 2: 10m Remote Control Range. This image demonstrates the effective operating distance of the wireless remote control, reaching up to 10 meters (32.8 feet) from the camera.

Figure 3: 40-Hour Marathon Battery. This image highlights the universal USB-C charging port and the remote's impressive battery life, offering up to 40 hours of continuous use on a single 2.5-hour charge.

3. Setup

3.1 Charging the Remote Control

1. Locate the USB-C charging port on the side of the remote control.
2. Connect the remote control to a power source using a USB-C cable.
3. Allow approximately 2.5 hours for a full charge. The remote provides up to 40 hours of continuous operation when fully charged.
4. Important: Ensure the input voltage for charging does not exceed 8V.

3.2 Pairing with Your Camera

The remote control uses Bluetooth for wireless connection. The pairing process is generally straightforward and similar across compatible camera models.

1. Ensure your camera's Bluetooth function is enabled. Refer to your camera's instruction manual for specific steps to enable Bluetooth pairing mode.
2. On the SMALLRIG remote control, slide the power switch to the 'ON' position.
3. Activate the pairing mode on the remote control (e.g., by holding down specific buttons as indicated in the camera's Bluetooth pairing menu, often the 'REC' and 'C' buttons simultaneously for a few seconds).
4. Select the SMALLRIG remote control from the list of available Bluetooth devices on your camera's screen to complete the pairing process.
5. Once successfully paired, the remote will automatically connect to the camera the next time both devices are powered on.

4. Operating Instructions

After successful pairing, you can use the remote control to operate various camera functions.

• Photography: Press the Focus/Shutter-Release button halfway to focus, then press fully to capture a photo.
• Video Recording: Press the Record button once to start recording, and press it again to stop.
• Zoom Control: Use the 'T' (Telephoto) and 'W' (Wide) buttons to zoom in and out, respectively, with compatible power zoom lenses.
• Custom Functions: The 'C' button can be assigned to a specific function through your camera's menu settings. Refer to your camera's manual for customizing button assignments.

5. Compatibility

The SMALLRIG Wireless Camera Remote Control is compatible with a range of Sony, Canon, and Nikon cameras that support Bluetooth remote control functionality. Firmware updates via the SmallRig Up app ensure ongoing compatibility.

Figure 4: Strong & Ongoing Compatibility. This image illustrates the multi-brand compatibility of the remote control and highlights the SmallRig Up app for firmware updates to maintain broad camera model support.

5.1 Compatible Sony Cameras

• Alpha 7 III / Alpha 7 IV / Alpha 7R III / Alpha 7R IV / Alpha 7R V / Alpha 7S III
• Alpha 7C II / Alpha 7C / Alpha 7CR
• Alpha 9 / Alpha 9 II / Alpha 9 III / Alpha A1 / Alpha 1 II
• Alpha 6700 / Alpha 6600 / Alpha 6100 / Alpha 6400
• ZV-E1 / ZV-E10 / ZV-E10 II / ZV-1 II / ZV-1 / ZV-1F
• FX3 / FX30

5.2 Compatible Canon Cameras

• M200 / R50 / PowerShot V1 / R50V
• R5II / R8 / R6 Mark II / R5 / R6 / R7 / R10
• M6 Mark II / R / M50 II / G7X III

5.3 Compatible Nikon Cameras

• Z50II

For detailed function compatibility (Focus, Shutter Release, Video, Custom, Zoom), please refer to the compatibility chart available on the SmallRig product page or within the SmallRig Up app.

6. Maintenance

• Cleaning: Use a soft, dry cloth to clean the remote control. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the remote control in a cool, dry place away from direct sunlight and extreme temperatures.
• Protective Case: Utilize the included silicone protective case to shield the remote from minor impacts and wear, extending its lifespan.
• Charging: Always adhere to the specified charging voltage (not exceeding 8V) to prevent damage to the internal battery.

Figure 5: Versatile Remote Essentials. This image showcases the wear-resistant silicone case that protects the remote and the convenient wrist strap for secure handling and portability.

7. Troubleshooting

• Remote not connecting:
  • Ensure the remote control is powered on and fully charged.
  • Verify that your camera's Bluetooth is enabled and in pairing mode.
  • Try re-pairing the remote control with your camera following the steps in Section 3.2.
  • Ensure the remote is within the 10-meter operating range of the camera.
• Functions not working (e.g., zoom, record):
  • Check your camera's settings to ensure the desired functions are enabled for remote control.
  • Confirm that your camera model and lens (for zoom) are fully compatible with all remote functions. Refer to the compatibility section.
  • Update the remote control's firmware using the SmallRig Up app.
• Short battery life:
  • Ensure the remote is fully charged for 2.5 hours.
  • Avoid leaving the remote powered on when not in use.

8. Specifications

Figure 6: Package Contents and Specifications. This image provides a visual representation of what is included in the product package and lists the detailed physical and technical specifications of the remote control.

9. Warranty and Support

SMALLRIG products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact SMALLRIG customer support directly or visit their official website. Keep your purchase receipt as proof of purchase for warranty claims.

Official Website: www.smallrig.com