AUDEEKON DM35LEU-6/20 DC 12V Tubular Motor Instruction Manual

1. Product Overview

The AUDEEKON DM35LEU-6/20 is a DC 12V tubular motor designed for automating roller blinds. It features a built-in rechargeable lithium battery, eliminating the need for constant wiring, and can be operated via a wireless remote control. This motor is suitable for various window treatments and offers smart home compatibility.

Key Features:

• Versatile Compatibility: Designed to fit 47mm, 50mm, and 55mm roller blind tubes.
• Built-in Rechargeable Battery: Equipped with a long-lasting Li-Battery for cordless operation (DC 12V, 26W). Provides power for up to 6 months per charge.
• Easy DIY Installation: Fits standard 50mm tubes; no electrician needed. Compatible with roller blinds, Roman shades, and motorized curtain tracks.
• Smart Home Ready: Works with remote controls, wall switches, or smart home systems (compatibility may vary, check specific system requirements).

Package Contents:

• 1x DC Tubular Motor (DM35LEU-6/20)
• 1x Rubber Fittings (for Rollease 50mm tube)
• 1x Remote Control
• 1x USB Charging Cable
• 1x User Manual

Note: Mounting accessories are sold separately if applicable.

Image: The DM35LEU-6/20 tubular motor shown with its wireless remote control and USB charging cable, highlighting its built-in lithium battery for cordless use.

2. Setup and Installation

Compatibility Check:

Before installation, verify that your roller blind tube size is compatible with the motor. This motor is designed for 47mm, 50mm, and 55mm tubes. The included rubber fittings are specifically for 50mm Rollease tubes.

Image: A close-up of a 50mm shade tube, indicating its suitability for this motor.

Installation Steps:

Follow these steps to install the motor into your roller blind system. Ensure all power is disconnected before beginning installation.

1. Step 1: Insert Motor into Drive Tube
   Carefully insert the tubular motor into the suitable drive tube of your roller blind. Ensure it is seated correctly and securely.
2. Step 2: Install End Plugs and Mounting Brackets
   Install the end plugs onto the tube. Then, attach the mounting brackets to the tube. Place the assembly into the tube to test the full length. Mark the precise location on the wall where the brackets will be mounted.
3. Step 3: Clamp Curtain and Complete Installation
   Securely clamp the entire curtain assembly to the pre-installed mounting brackets on the wall. Verify that the blind operates smoothly.

Image: A visual representation of the three installation steps: inserting the motor, installing end plugs and brackets, and clamping the curtain.

Initial Charging:

Before first use, fully charge the motor's built-in lithium battery using the provided USB charging cable. Connect the USB cable to the motor's charging port and a compatible USB power adapter (not included). The charging indicator will typically show charging status and turn off or change color when fully charged.

3. Operating Instructions

Using the Wireless Remote Control:

The motor is operated using the included wireless remote control. Familiarize yourself with the buttons:

• Up Arrow: Raises the blind.
• Down Arrow: Lowers the blind.
• Stop/Pause Button: Stops the blind at its current position.
• Programming Button (often recessed): Used for setting limits and pairing the remote. Refer to the specific remote control manual for detailed programming instructions.

Setting Upper and Lower Limits:

To ensure proper operation, you must set the upper and lower travel limits for your blind. This process typically involves pressing a programming button on the motor or remote, moving the blind to the desired upper/lower position, and then confirming the setting. Consult the detailed programming guide provided with your remote control for exact steps.

Smart Home Integration:

This motor is compatible with certain smart home systems like Alexa and Google Home. To integrate, you will typically need a compatible smart home hub or bridge (sold separately) that supports the motor's communication protocol. Follow the instructions provided by your smart home system manufacturer for pairing and control.

Image: An outdoor setting featuring two motorized roller blinds, demonstrating the motor's capability to lift loads up to 18kg (39.6LB).

4. Maintenance

Battery Charging:

The built-in lithium battery provides approximately 6 months of operation on a single charge, depending on usage frequency. When the motor's performance decreases or it stops responding, recharge the battery using the provided USB cable. A full charge typically takes several hours.

General Care:

• Keep the motor and remote control dry and away from excessive moisture.
• Avoid exposing the motor to extreme temperatures.
• Do not attempt to disassemble the motor unit. This will void the warranty.
• Clean the exterior of the motor and remote with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.

5. Troubleshooting

Motor Not Responding:

• Check Battery: Ensure the motor's battery is charged. Connect the USB charging cable and allow it to charge for a few hours.
• Remote Battery: Replace the battery in the wireless remote control if it is not transmitting signals.
• Pairing: If the motor and remote are not paired, follow the pairing instructions in your remote control manual.

Blind Not Moving to Correct Limits:

• Reset Limits: The upper and lower travel limits may need to be reset. Refer to your remote control's programming guide for instructions on how to adjust or reset these limits.
• Obstructions: Check for any physical obstructions preventing the blind from reaching its full travel.

Unusual Noise During Operation:

• Installation Check: Ensure the motor is properly seated within the tube and that the mounting brackets are secure. Loose components can cause rattling.
• Tube Condition: Inspect the roller blind tube for any damage or deformation that might interfere with motor operation.

6. Specifications

Image: The DM35LEU-6/20 DC Electronic Tubular Motor with its key specifications including dimensions, power, torque, and charging details.

7. Warranty and Support

Warranty Information:

Please refer to the product packaging or the seller's official website for specific warranty terms and conditions. Typically, products come with a limited manufacturer's warranty covering defects in materials and workmanship under normal use.

Customer Support:

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact AUDEEKON customer support through the retailer where the product was purchased or visit the official AUDEEKON website for contact information.