ULTIMEA U3721
Contents
ULTIMEA Poseidon M60 5.1ch Dolby Atmos Soundbar System User Manual
Model: U3721
1. Introduction
The ULTIMEA Poseidon M60 is a 5.1-channel Dolby Atmos soundbar system designed to deliver an immersive home theater audio experience. This system features five built-in drivers, including side-firing speakers, for comprehensive surround sound without the need for additional rear speakers. With a peak power output of 300 watts and a wired subwoofer, it provides clear audio and deep bass for various entertainment needs. The system supports HDMI eARC for high-fidelity sound transmission and offers customizable sound settings via the ULTIMEA app.
2. What's in the Box
- 1x Soundbar
- 1x Wired Subwoofer
- 1x Power Adaptor
- 1x HDMI Cable
- 1x Remote Control (Batteries Not Included)
- 2x Wall Brackets
- 2x Mounting Screws
- 4x Wall Mounted Kit
3. Product Components

Figure 3.1: ULTIMEA Poseidon M60 Soundbar and Subwoofer. The soundbar is a long, slender black unit with a separate rectangular black subwoofer.

Figure 3.2: Internal view of the soundbar showing five built-in speakers, including dedicated left and right surround channels.

Figure 3.3: Diagram illustrating the 16mm bass-boosting excursion of the subwoofer driver, designed for deeper bass.

Figure 3.4: Dimensions of the subwoofer: 13.77 inches (depth), 5.9 inches (width), and 7.4 inches (height).

Figure 3.5: Overall dimensions of the soundbar (31.49 inches long, 3.54 inches deep, 2.75 inches high) and subwoofer.
4. Setup
4.1 Placement
The ULTIMEA Poseidon M60 soundbar can be placed on a tabletop in front of your television or mounted on a wall. Ensure the soundbar is centrally located relative to your TV for optimal sound dispersion. The wired subwoofer should be placed on the floor, ideally in a corner or near a wall, to enhance bass response. Avoid obstructing the subwoofer's driver.
4.2 Connections
Connect the soundbar to your television and power source using the provided cables.
- HDMI eARC Connection: For the best audio quality and simplified control, connect the HDMI eARC port on the soundbar to the HDMI eARC/ARC port on your TV using the supplied HDMI cable. This allows for full-bandwidth Dolby Atmos and CEC integration, enabling your TV remote to control the soundbar's basic functions.
- Optical Connection: If your TV does not have an HDMI eARC/ARC port, use an optical cable (not included) to connect the soundbar's OPTICAL port to your TV's optical digital audio output.
- Subwoofer Connection: Connect the wired subwoofer to the soundbar using the dedicated subwoofer cable.
- Power Connection: Connect the power adaptor to the soundbar's DC IN port and then plug it into a wall outlet.

Figure 4.1: Comparison of HDMI eARC (37Mbps Lossless Audio) and HDMI ARC (1Mbps Compressed Audio) connections.
4.3 Initial Power On
After connecting all cables, press the power button on the soundbar or the remote control to turn on the system. The soundbar will typically default to the last used input or automatically detect an active input.
Video 4.1: An official ULTIMEA video demonstrating the setup and features of the Poseidon M60 soundbar system, including its 5.1ch Dolby Atmos surround sound capabilities.
5. Operating Instructions
5.1 Power On/Off
- Press the Power button on the soundbar or remote control to turn the system on or off.
5.2 Input Selection
- Press the Source button on the remote control or the soundbar to cycle through available inputs: HDMI (eARC), Optical, and Bluetooth.
5.3 Volume Control
- Use the Volume + and Volume - buttons on the remote control or soundbar to adjust the master volume.
5.4 Sound Modes and EQ Settings
The ULTIMEA Poseidon M60 offers various sound presets and customizable EQ settings to optimize your listening experience.
- Preset Modes: Use the remote control to select from predefined sound modes such as Movie, Music, Voice, Game, Sport, and Night.
- App Control: Download the ULTIMEA app to access 121 audio presets and fine-tune EQ settings (Bass, Midrange, Treble) for a personalized sound profile. The app also supports Over-The-Air (OTA) updates for firmware improvements.

Figure 5.1: Screenshots of the ULTIMEA app interface, showing options for equalizer adjustments and sound style customization.
5.5 Bluetooth Pairing
To connect a Bluetooth device:
- Press the Bluetooth button on the remote control or soundbar to enter Bluetooth pairing mode. The indicator light will flash.
- On your mobile device, enable Bluetooth and search for
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.