DERCASS LP000924 Full Size Murphy Bed with Closet, Drawers, and Table User Manual

1. Product Overview

The DERCASS LP000924 Murphy Bed is a space-saving furniture solution designed for bedrooms, guest rooms, home offices, or studios. This full-size wall bed integrates a foldable bed with two wardrobes, multiple drawers, and a built-in desk, allowing for efficient use of living space. When folded, the bed is concealed within a cabinet, transforming the room's functionality.

Key features include a hydraulic lifting system for smooth operation, flexible mattress support slats for comfort, and integrated storage solutions. The unit is constructed from engineered wood (Plywood+MDF) and finished in white.

Figure 1: DERCASS Full Size Murphy Bed in open position, showcasing the bed frame, integrated wardrobes, and drawers.

2. Safety Information

Please read and understand all safety instructions before assembly and use. Failure to follow these instructions may result in injury or damage to the product.

• Wall Mounting is Essential: This Murphy bed unit MUST be securely anchored to a structural wall stud using the provided hardware. Do not attempt to use the bed without proper wall mounting.
• Professional Assembly Recommended: Due to the size and complexity, professional assembly is recommended. If assembling yourself, ensure at least two adults are present.
• Weight Capacity: The bed has a maximum weight capacity of 400 lbs. Do not exceed this limit.
• Mattress Requirements: Use a full-size mattress with a maximum thickness of 8 inches. Do not use a box spring.
• Clearance: Ensure adequate clearance around the unit for safe operation of the bed and wardrobe doors.
• Children and Pets: Keep children and pets away from the unit during assembly and operation. Do not allow children to play on or around the bed mechanism.
• Inspect Regularly: Periodically check all fasteners and connections to ensure they remain tight and secure.

3. Package Contents

The DERCASS LP000924 Murphy Bed is shipped in multiple packages. Please verify all packages have been received and inspect for any damage before beginning assembly. Refer to the separate assembly instructions for a detailed list of parts and hardware.

• Sub-item 1: N708P252045K (Approx. 92.59 lbs)
• Sub-item 2: N708P252044K (Approx. 113.54 lbs)
• Sub-item 3: N708P252043K (Approx. 104.72 lbs)
• Sub-item 4: N708P252042K (Approx. 102.51 lbs)

Note: The total product weight is approximately 389.36 lbs.

4. Setup and Assembly

Assembly of the DERCASS LP000924 Murphy Bed requires careful attention to detail and adherence to the provided assembly manual. It is strongly recommended that two adults perform the assembly.

4.1 Before You Begin

• Read Instructions: Thoroughly read the separate assembly instructions provided with your product before starting.
• Clear Workspace: Ensure you have a large, clear, and level workspace.
• Tools: Gather all necessary tools as specified in the assembly manual. Basic tools are typically included.
• Identify Parts: Unpack and identify all parts and hardware. Compare them against the parts list in the assembly manual.

4.2 Assembly Steps (Refer to separate manual for detailed steps)

1. Assemble the main cabinet frame.
2. Attach the side wardrobes and drawers.
3. Install the bed frame and hydraulic lifting mechanism.
4. Securely anchor the entire unit to a structural wall stud. This step is critical for safety.
5. Install the mattress support slats.
6. Place your full-size mattress (max 8" thickness) onto the bed frame.

Figure 2: Dimensional view of the DERCASS Murphy Bed in the open position, showing overall width and height.

Figure 3: Rear view of the Murphy Bed mechanism, illustrating the internal structure and support.

5. Operating Instructions

5.1 Opening the Bed

1. Ensure the area in front of the cabinet is clear of obstructions.
2. Gently pull the handles located on the front panel of the bed.
3. As the bed begins to lower, the hydraulic lifting system will assist in a smooth descent.
4. Once fully lowered, ensure the support legs are properly extended and resting on the floor.

Figure 4: The Murphy Bed fully extended and ready for use.

5.2 Closing the Bed

1. Remove all bedding and pillows from the bed. (The mattress does not need to be removed).
2. Fold the support legs back into their stored position.
3. Grasp the handles and gently lift the bed upwards. The hydraulic system will assist in lifting the bed back into the cabinet.
4. Continue lifting until the bed is fully retracted and securely latched into the cabinet.

Figure 5: The Murphy Bed in its closed cabinet configuration, showing overall dimensions.

5.3 Using the Integrated Desk

The unit includes a drop-down desk on the side. To use, simply lower the desk panel. Ensure it is securely supported before placing items on it. The desk provides a temporary workspace when the bed is closed.

5.4 Using the LED Lights

The integrated LED lights on the top of the unit provide gentle illumination. Locate the switch (refer to assembly manual for exact location) to turn them on or off. These lights are designed for ambient lighting, such as reading.

6. Maintenance and Care

• Cleaning: Wipe surfaces with a dry cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Hardware Check: Periodically check all screws, bolts, and connections to ensure they are tight. Loose hardware can affect the stability and safety of the unit.
• Hydraulic System: The hydraulic lifting system is designed for long-term use. If you notice any issues with the bed's movement, do not force it. Contact customer support.
• Mattress Care: Follow your mattress manufacturer's care instructions.

7. Troubleshooting

If you encounter any issues with your DERCASS Murphy Bed, please refer to the following common solutions:

If the problem persists or you encounter an issue not listed here, please contact DERCASS customer support.

8. Specifications

9. Warranty and Support

For warranty information, missing parts, or technical assistance, please contact DERCASS customer support. Have your model number (LP000924) and purchase details ready when contacting support.

You can typically find contact information on the retailer's website or within your purchase documentation.