Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your MELLCOM 10x13FT Wall-Mounted Louvered Pergola. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Important Safety Information:
- Always follow the included instruction manual for safe installation.
- Use appropriate tools and ensure the surface is flat and solid before mounting.
- Avoid excessive snow load to prevent damage; open louvers during heavy snowfall.
- Supervise children and pets around the pergola.
Components Overview
Your pergola package includes various components designed for durability and functionality. Please verify all parts are present before assembly.
Image Description: Illustration showing the pergola components delivered in 7 boxes, indicating the comprehensive nature of the package.
The main structure consists of heavy-duty aluminum frames and louvers, designed for rust-free, weatherproof, and UV-protected performance.
Image Description: Close-up view of the continuous aluminum beams and posts, highlighting the pre-drilled foot plates and expansion bolts for secure installation. The frame is designed to be wind-resistant up to 80 mph.
Setup and Installation
Assembly typically requires 6-8 hours with two or more people. Ensure you have a flat, solid surface for mounting.
Wall-Mounted Design
The pergola is designed to be securely bolted to a solid, hard wall, seamlessly integrating with your building.
Image Description: A three-step visual guide demonstrating the wall-mounting process: 1. Drill holes at the appropriate height, 2. Expand holes to match expansion bolt size, 3. Screw in the expansion bolts. This ensures a secure attachment to the building.
Assembly Video
For a visual guide on the assembly process, please refer to the official MELLCOM assembly video below. Note that this video may show a 12x16FT model, but the general assembly principles apply.
Video Description: An official MELLCOM assembly video demonstrating the installation process for a louvered pergola. This video provides a step-by-step visual aid for users during setup.
Operating Instructions
Adjustable Louvered Roof
The louvered roof sections can be adjusted independently from 0° to 90° using a crank mechanism. This allows you to control sunlight, shade, and rain protection.
Image Description: A close-up of the louvered roof showing the adjustable slats and the crank mechanism. An inset diagram illustrates the 0° (closed) and 90° (open) positions for flexible light and ventilation control.
Image Description: A user demonstrating the quick roof adjustment using the easy-to-use crank mechanism. The louvers can be opened or closed to provide instant sun protection or shelter from rain.
Pull-Down Screen Sides
The pergola features three pull-down screen sides made of durable Textilene. These screens offer weather resistance, privacy, and UV protection. Adjust them to your desired height using the bottom rod, or retract them into their casing when not in use.
Image Description: The pergola with its pull-down screen sides partially lowered, demonstrating their function for privacy and sun protection. An icon indicates UV protection.
Maintenance
Drainage System
The sloped roof design incorporates an efficient built-in drainage system. Rainwater is channeled from the hardtop roof through internal gutters, down the legs, and out through the posts, keeping the area dry.
Image Description: A visual representation of the pergola's sloped roof and integrated drainage system. Water flows from the louvers into internal gutters and then down through the posts, ensuring efficient water removal.
Seasonal Care
- Snow Load: To extend the lifespan of your pergola, prevent excessive snow load by opening the louvers during heavy snowfall.
- Cleaning: Regularly clean the aluminum frame and screens with mild soap and water. Avoid abrasive cleaners.
- Inspection: Periodically inspect all bolts and connections to ensure they remain secure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Louvers not opening/closing smoothly | Debris in mechanism, misaligned louvers, or crank issue. | Inspect for debris and clear. Check louver alignment. Ensure crank is properly engaged. |
| Water pooling on roof | Louvers not fully closed, or drainage system clogged. | Ensure louvers are completely closed. Clear any blockages in the gutters and posts. |
| Screens not retracting/extending | Obstruction in the casing or mechanism. | Check for any objects blocking the screen's path. Gently guide the screen if it's off track. |
| Pergola feels unstable | Loose anchor bolts or improper installation. | Re-tighten all anchor bolts. Review installation steps to ensure proper setup on a solid surface. |
Specifications
| Brand | MELLCOM |
| Model | 10x13FT (B0F63HKYYC) |
| Material | Aluminum |
| Product Dimensions | 154"L x 114"W x 99"H |
| Item Weight | 379.2 Pounds |
| Frame Material | Aluminum |
| Water Resistance Level | Water Resistant |
| Ultraviolet Light Protection | YES |
| Assembly Required | Yes |
| Color | Gray |
Image Description: A diagram illustrating the key dimensions of the louvered pergola, including height (8.2'), width (114" or 9.5'), and length (154" or 12.8'). A note advises to refer to the actual product for precise dimensions due to potential manual measurement variations.
Warranty and Support
For any questions or support regarding your MELLCOM Louvered Pergola, please contact MELLCOM customer service. The product is designed for long-lasting durability with rust-free, weatherproof, and UV-protected aluminum components.
Refer to the original purchase documentation for specific warranty terms and conditions.
You can visit the official MELLCOM store for more information: MELLCOM Store
