SUPERJARE Rattan Console Sofa Table with Outlets and USB-C Port Instruction Manual

1. Introduction

Thank you for choosing the SUPERJARE Rattan Console Sofa Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in injury or damage to the product.

• Always assemble according to the provided instructions.
• Do not overload the table beyond the maximum weight recommendation of 56 pounds.
• Keep the table away from heat sources.
• Do not place heavy objects on the top shelf that exceed the weight limit.
• Always unplug the table when not in use or during cleaning.
• Keep the table away from children and pets to prevent injury from drawers or outlets.
• Always follow local electrical codes when using the integrated outlets.
• To prevent tipping over, please secure this furniture to the wall using the Anti-tip Devices (Q) as instructed in the assembly section.

3. Package Contents

Before assembly, ensure all parts and hardware are present and undamaged. Refer to the assembly instructions for a detailed list of components. If any parts are missing or damaged, please contact customer support.

4. Setup and Assembly Instructions

Assembly of the SUPERJARE Rattan Console Sofa Table requires careful attention to detail. All necessary tools are included. For a comprehensive visual guide, please refer to the official installation video below. The video demonstrates each step from unpacking to final placement.

Assembly Overview:

1. Prepare Components: Unpack all parts and lay them out on a clean, soft surface to prevent scratches. Identify each part using the labels provided.
2. Assemble Drawers: Construct the three drawers by attaching the sides, back, and bottom panels. Install the metal ring handles onto the rattan drawer fronts.
3. Assemble Frame: Connect the side frames and the bottom shelf. Attach the drawer slides to the inner frame sections.
4. Install Top Panel: Secure the top panel to the assembled frame.
5. Insert Drawers: Carefully slide the completed drawers into their respective slots on the frame.
6. Install Power Outlet: Mount the power outlet unit to the designated side panel of the table.
7. Attach Anti-Tip Devices: Secure the anti-tip devices to the back of the table and to a wall stud to prevent accidental tipping.

Official Installation Video:

5. Operating Instructions

Using the Charging Station:

The console table is equipped with a convenient side-mounted charging station. To use it:

1. Ensure the table's power cord is securely plugged into a functional wall outlet.
2. Connect your devices to the available 2 AC outlets (125V/12A), 1 USB-A port (5V/2A), or 1 USB-C port (5V/2A).
3. Unplug devices when fully charged or when the charging station is not in use.

Using the Drawers:

The three drawers feature smooth glides for easy access. To operate:

• Gently pull the metal ring handles to open the drawers.
• Push the drawers back in until they are fully closed.
• Avoid forcing drawers open or closed to prevent damage to the glides.

6. Maintenance

Cleaning:

• Wipe the table surfaces with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
• For the rattan surfaces, use a soft, dry brush or cloth to remove dust.
• Ensure the charging station is unplugged before cleaning.

General Care:

• Periodically check all screws and fasteners to ensure they are tight. Retighten as necessary.
• Avoid exposing the table to direct sunlight or extreme temperature changes to prevent warping or fading.
• Do not drag the table when moving it; always lift it to prevent damage to the legs and frame.

7. Troubleshooting

Drawers not sliding smoothly:

• Check if the drawer slides are correctly aligned and securely fastened. Refer to assembly steps for drawer installation.
• Ensure no objects are obstructing the drawer's path.

Power outlets not working:

• Verify that the table's main power cord is firmly plugged into a live wall outlet.
• Check if the wall outlet itself is functional by plugging in another device.
• Ensure the power outlet unit is correctly installed and all connections are secure.

Table wobbles:

• Ensure all screws and fasteners are tightened.
• Verify the table is placed on a flat, even surface.
• Confirm that the anti-tip devices are properly installed and secured to the wall.

8. Specifications

9. Warranty & Support

Warranty:

This SUPERJARE Rattan Console Sofa Table comes with a Lifetime Warranty. Please retain your proof of purchase for any warranty claims.

Customer Support:

For any questions, missing parts, or assistance with assembly or operation, please contact SUPERJARE customer support. Refer to the product packaging or the official SUPERJARE website for contact details.