1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Yusist TL-155-2 Solar Street Light. Please read this manual thoroughly before use to ensure proper function and longevity of the product. This solar street light is designed for outdoor use, providing efficient and reliable illumination for various areas.
Image: Overview of Yusist Solar Outdoor Lights highlighting key features like motion sensing, dusk-to-dawn operation, remote control, IP65 waterproofing, and ultra-bright illumination.
2. What's in the Box
Verify that all components are present before proceeding with installation:
- Solar Street Light (2 units for 2-pack)
- Remote Control
- Mounting Hardware (screws, anchors, extension pole)
- Instruction Manual (this document)
Image: Detailed view of the solar street light's components, including its dimensions, the remote control, and the included mounting hardware.
3. Setup and Installation
The Yusist TL-155-2 Solar Street Light offers versatile installation options. Choose between wall-mounted or pole-mounted setup based on your requirements. Ensure the solar panel receives direct sunlight for optimal charging.
3.1 Installation Methods
The light can be installed in two primary ways:
- Wall Mounted: Secure the light directly to a wall using the provided mounting hardware.
- Pole Mounted: Attach the light to a pole (up to 2.75 inches in diameter) using the included extension pole and mounting brackets.
Image: Visual guide demonstrating both wall-mounted and pole-mounted installation options for the solar street light.
3.2 Important Considerations
- Sunlight Exposure: Position the solar panel in an area that receives at least 6-8 hours of direct sunlight daily for efficient charging.
- Clearance: Ensure there are no obstructions (trees, buildings) blocking sunlight from reaching the solar panel.
- Height: Install the light at an appropriate height to maximize illumination coverage for your desired area.
3.3 Step-by-Step Installation Video
Video: A step-by-step tutorial demonstrating the assembly and installation process of the solar street light, including how to attach the light to a pole or wall.
4. Operating Instructions
The Yusist TL-155-2 Solar Street Light features multiple operating modes controlled by the included remote.
4.1 Remote Control Functions
The remote control allows you to select different lighting modes and adjust brightness:
- ON/OFF: Power the light on or off.
- Mode 1 (Dusk to Dawn): The light automatically turns on at dusk and off at dawn. Brightness can be adjusted to 25%, 50%, 75%, or 100% in this mode.
- Mode 2 (Motion Sensor): The light illuminates at 100% brightness when motion is detected and dims to 30% brightness when no motion is present.
- Mode 3 (Timed Lighting): Set the light to operate for a specific duration: 2H, 3H, 5H, 6H, or 8H.
- Brightness Adjustment: Buttons to increase or decrease light intensity (available in Mode 1).
Image: Visual representation of the motion sensor's intelligent energy modes, showing how brightness levels change with and without detected motion.
4.2 Initial Activation
Upon first use, ensure the solar panel has been charged for at least 6-8 hours in direct sunlight. Use the remote control to select your desired operating mode.
4.3 Product Features Video
Video: An overview of the solar street light's features, including its tri-color temperature LED and various operational aspects.
5. Maintenance
To ensure optimal performance and extend the lifespan of your solar street light, follow these maintenance guidelines:
- Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris that may hinder charging efficiency.
- Inspect for Damage: Periodically check the light and mounting hardware for any signs of wear, corrosion, or damage. Tighten any loose screws.
- Battery Care: The integrated battery is designed for long-term use. Avoid prolonged storage in a completely discharged state.
5.1 Weather Resistance
The Yusist TL-155-2 is designed to withstand various outdoor conditions.
Image: Demonstrates the light's durability against various weather conditions, including rain (IP65 waterproof), cold, and heat.
6. Troubleshooting
If you encounter issues with your solar street light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | Insufficient solar charge. | Ensure the solar panel is in direct sunlight for 6-8 hours daily. Clean the solar panel. |
| Light is dim or flickers. | Low battery charge or dirty solar panel. | Allow the light to charge fully. Clean the solar panel. |
| Motion sensor not working. | Sensor obstructed or incorrect mode selected. | Clear any obstructions from the sensor. Ensure Mode 2 (Motion Sensor) is selected via remote. |
| Remote control not responding. | Remote battery depleted or line of sight issue. | Replace remote batteries. Ensure direct line of sight to the light's receiver. |
7. Specifications
- Model Number: TL-155-2
- Light Source: 5054 LEDs
- Color Temperature: 6500K (Daylight White)
- Brightness: Up to 20000 Lumens
- Illumination Angle: 320° Wide Angle
- Battery Capacity: 6000 mAh
- Charging Time: 4-6 hours (direct sunlight)
- Working Time: 12-16 hours
- Material: High-impact ABS
- Water Resistance: IP66
- Operating Temperature: -10℃ to 80℃ (14℉ to 176℉)
- Control Method: Remote Control
- Mounting Type: Wall Mount / Pole-Mounted
- Item Weight: 1.73 Kilograms
8. Warranty
The Yusist TL-155-2 Solar Street Light comes with a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
9. Support
For any questions, technical assistance, or warranty inquiries, please contact Yusist customer support. We aim to provide a prompt reply within 24 hours.
Contact Information: Refer to the product packaging or the official Yusist website for the most current customer support details.