1. Introduction
Thank you for purchasing the BLOKEES Saint Seiya Champion Class Leo Aiolia action figure kit. This kit allows you to assemble a highly detailed and poseable figure of Leo Aiolia, faithfully capturing his classic manga appearance. This manual provides essential information for assembly, posing, maintenance, and general use of your figure.
Image 1.1: Fully assembled BLOKEES Saint Seiya Leo Aiolia figure.
2. Safety Information
WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.
This product contains small components that may pose a choking hazard. Keep out of reach of young children. Recommended age for assembly and play is 12 years and older. Adult supervision is advised during assembly for younger users.
3. Package Contents
Before beginning assembly, please verify that all components are present in your kit. The package should contain all parts required to complete your BLOKEES figure, including:
- Figure parts (pre-painted, snap-together)
- Interchangeable face expressions
- Interchangeable hair/head parts (for helmet on/off display)
- "Light Speed Fist" effect part
- Character-specific display stand
- Instruction manual
Image 3.1: Overview of all components included in the kit.
4. Assembly Instructions (Setup)
The BLOKEES Leo Aiolia figure is designed for snap-together assembly, requiring no glue, paint, or cutters. Follow the steps below for proper construction.
- Prepare Parts: Carefully detach all parts from their runners. Ensure no excess plastic remains on the connection points.
- Assemble Torso: Connect the front and back torso pieces.
- Attach Limbs: Connect the arm and leg components to the torso. Ensure joints are securely fitted but allow for movement.
- Head Assembly: Choose your desired face expression and hair/helmet part. Assemble the head and attach it to the torso.
- Apply Armor: Attach the golden armor pieces to the corresponding body parts. These are designed to snap into place.
- Accessories: Prepare the "Light Speed Fist" effect part if desired. Assemble the display stand according to its separate instructions.
Image 4.1: The figure features 44 points of articulation for dynamic posing.
For a visual guide on assembly and features, please refer to the official product video below:
Video 4.1: Official product video showcasing the BLOKEES Saint Seiya Champion Class series, including assembly and posing examples.
5. Posing and Display (Operating)
Your Leo Aiolia figure boasts 44 points of articulation, allowing for a wide range of dynamic poses. Experiment with different joint movements to recreate iconic battle stances from the manga.
- Dynamic Posing: Utilize the multiple articulation points in the neck, shoulders, elbows, wrists, waist, hips, knees, and ankles to achieve various action poses.
- "Light Speed Fist" Effect: Attach the translucent yellow effect part to Aiolia's hand to simulate his signature attack.
- Display Stand: Use the included character-specific stand to support the figure in mid-air or more complex poses. Ensure the stand's arm is securely connected to the figure's back or waist.
- Interchangeable Parts: Swap face expressions and hair/helmet parts to customize Aiolia's look for different scenes or moods.
Image 5.1: Leo Aiolia figure posed dynamically on its display stand.
Image 5.2: Leo Aiolia showcasing the "Light Speed Fist" effect part.
6. Maintenance
To ensure the longevity and appearance of your BLOKEES Leo Aiolia figure, follow these maintenance guidelines:
- Cleaning: Gently wipe the figure with a soft, dry cloth to remove dust. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the paint or material.
- Storage: Store the figure away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation. Keep it in a cool, dry place.
- Handling: Handle the figure by its main body parts rather than delicate accessories or joints to prevent accidental breakage.
7. Troubleshooting
If you encounter any issues with your figure, consider the following common solutions:
- Loose Joints: If a joint feels too loose, carefully remove the part and re-insert it, ensuring it snaps firmly into place. Avoid excessive force.
- Parts Not Fitting: Ensure you are using the correct parts for each step. Some parts may require a gentle but firm push to connect. Refer to the assembly diagrams if available.
- Missing Parts: If you believe a part is genuinely missing, please refer to the warranty and support section for assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | BLOKEES |
| Model Name | SS-CC- Leo Aiolia |
| Model Number | 75003 |
| Material Type | Acrylonitrile Butadiene Styrene (ABS) |
| Item Dimensions (L x W x H) | 3 x 2 x 5.5 inches (7.62 x 5.08 x 13.97 cm) |
| Item Weight | 250 Grams |
| Number of Pieces | 17 |
| Assembly Required | Yes |
| Recommended Age | 12 Years and Up |
Image 8.1: Product packaging with approximate dimensions.
9. Warranty and Support
This BLOKEES product comes with a 30-day warranty against manufacturer defects from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, missing parts, or any other product support inquiries, please contact BLOKEES customer support through their official website or the retailer where the product was purchased. Please have your proof of purchase and model information ready when contacting support.