DELIPOP 3-Light Industrial Vintage Pendant Lamp Instruction Manual

1. Important Safety Instructions

Please read these instructions carefully before installation and use. Keep this manual for future reference.

• Electrical Safety: Always turn off the main power supply at the circuit breaker before installing, cleaning, or performing any maintenance on the fixture. Failure to do so may result in electric shock, injury, or death.
• Qualified Electrician: Installation should be performed by a qualified electrician or a person with adequate electrical knowledge to ensure proper and safe wiring.
• Voltage Compatibility: Ensure the fixture's voltage (220-240V) is compatible with your household electrical system.
• Bulb Type: Use only E27 base bulbs with a maximum wattage of 60W per bulb. Do not exceed the recommended wattage.
• Secure Mounting: Ensure the ceiling plate is securely mounted to a structural element of the ceiling to support the weight of the fixture.
• Indoor Use Only: This product is designed for indoor use only. Do not expose to moisture or outdoor elements.
• Handling: Handle the metal cage shades and bulbs with care to prevent damage.

2. Package Contents

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact customer support.

• 1 x DELIPOP 3-Light Pendant Lamp Fixture (includes ceiling plate, cables, lamp holders, and metal cages)
• 1 x Mounting Hardware Kit (screws, wire connectors, etc.)
• 1 x Instruction Manual

Note: E27 bulbs are not included and must be purchased separately.

3. Product Specifications

For detailed energy efficiency information, please refer to the EU Energy Label:

EU Energy Label for DELIPOP DE-LED-8. Efficiency class E, 8 kWh/1000h.

More information available at: https://eprel.ec.europa.eu/qr/1551538

4. Setup and Installation

Before you begin: Ensure the power is turned off at the circuit breaker. It is recommended to have a second person assist with installation.

4.1 Identify Components

Figure 1: Exploded view of the pendant lamp components.

Familiarize yourself with the parts: ceiling plate, adjustable cables, lamp holders with E27 sockets, and metal cage shades.

4.2 Prepare for Mounting

1. Turn off the power at the main circuit breaker.
2. Carefully unpack all components and check for any damage.
3. Determine the desired hanging length for each pendant. The cables are adjustable up to 120 cm. To adjust, push the cable into the ceiling plate to shorten, or pull gently from the ceiling plate to lengthen. Secure with the fixing ring.

Figure 2: Product dimensions and electrical specifications.

4.3 Mount the Ceiling Plate

1. Position the ceiling plate against the ceiling where the fixture will be installed. Mark the drilling locations for the mounting screws.
2. Drill pilot holes at the marked locations. Insert appropriate wall anchors if necessary (e.g., for drywall).
3. Secure the mounting bracket (if separate) or the ceiling plate directly to the ceiling using the provided screws. Ensure it is firmly attached.

4.4 Electrical Wiring

Warning: If you are unsure about electrical wiring, consult a qualified electrician.

1. Connect the household electrical wires to the corresponding wires from the pendant lamp fixture. Typically:
   • Live (L) wire (usually brown or black) to the fixture's Live wire.
   • Neutral (N) wire (usually blue or white) to the fixture's Neutral wire.
   • Ground (E) wire (usually green/yellow or bare copper) to the fixture's Ground wire.
   Use the provided wire connectors to secure the connections.
2. Carefully tuck all wires into the junction box or ceiling plate, ensuring no wires are pinched.

4.5 Final Assembly

1. Attach the ceiling plate to the mounting bracket (if applicable) or directly to the ceiling, securing it with the decorative nuts or screws.
2. Screw E27 base bulbs (not included) into each lamp holder. Do not overtighten.
3. Restore power at the circuit breaker and test the light fixture.

5. Operating Instructions

The DELIPOP 3-Light Pendant Lamp operates like any standard ceiling light fixture.

1. Ensure appropriate E27 bulbs are securely installed in all three sockets.
2. Turn on the wall switch connected to the fixture to illuminate the lights.
3. Turn off the wall switch to extinguish the lights.

Figure 3: Lamp in OFF and ON states.

6. Maintenance

Regular maintenance will help preserve the appearance and functionality of your pendant lamp.

• Cleaning: Always turn off the power before cleaning. Use a soft, dry cloth to wipe down the metal surfaces and cage shades. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Bulb Replacement: Ensure the power is off and the bulbs have cooled completely before attempting to replace them. Unscrew the old bulb and screw in a new E27 bulb (max 60W).
• Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.

7. Troubleshooting

8. Warranty and Support

Specific warranty information for this product is not provided in the available documentation. For warranty claims or technical support, please contact DELIPOP customer service through your purchase platform or the official DELIPOP website.

You can visit the DELIPOP store for more products and information: DELIPOP Store