fishkeeper Automatic Outdoor Pond Feeder

Introduction

Thank you for choosing the fishkeeper Automatic Outdoor Pond Feeder. This manual provides detailed instructions for the safe and efficient operation of your new feeder. Please read this manual thoroughly before use and retain it for future reference. This feeder is designed to provide precise and scheduled feeding for your pond fish, ensuring optimal nutrition even when you are away.

Important Safety Information

• Ensure the feeder is placed on a stable, level surface to prevent tipping.
• Do not immerse the electronic components of the feeder in water.
• Use only the provided power adapter or specified batteries (4x AAA, not included).
• Keep out of reach of children and pets to prevent accidental damage or injury.
• Regularly inspect the power cord for any damage. Discontinue use if damaged.
• This product is designed for outdoor use. Ensure the desiccant compartment is used to keep food dry.

Package Contents

Carefully unpack all components and check against the list below. If any items are missing or damaged, please contact customer support.

The image above illustrates the feeder and its accessories.

• 1x fishkeeper Automatic Outdoor Pond Feeder
• 2x Nails for secure installation
• 3x Feeding Reduction Clips
• 1x 6.56ft/2m Power Cord (AC Adapter)
• 2x Foot Supports
• 1x Desiccant Container
• 1x User Manual

Product Overview

The fishkeeper FK092 is a robust and intelligent automatic feeder designed for outdoor pond environments. It features a large capacity, programmable feeding modes, and multiple protection mechanisms.

Large Capacity and Feed Types: The feeder has a 2.8L capacity and is suitable for various feed types including small pellets, large pellets, strips, and corn & nuts. Reduction clips allow precise portion control from 2g to 8g per serving.

Outstanding Moisture Resistance: Features a waterproof snap-on lid, a rainproof feed outlet chute, and a desiccant container (desiccant not included) to keep food dry. A rotatable rotor prevents feed clumping.

Quadruple Protection: Includes a safety latch cover to deter wildlife and robust foot supports with nails for screw-secured installation, preventing tipping and food spillage.

Setup

1. Installation

The feeder offers two installation methods:

• Pond-side Installation: Attach the foot supports to the base of the feeder. Use the provided nails to secure the feeder to the ground next to your pond, ensuring stability.
• Freestanding/Aquarium Installation: The feeder can also be placed freestanding on a stable surface or on top of a large aquarium (with a suitable lid) without using the foot supports and nails.

2. Power Supply

The feeder supports dual power options:

• AC Power: Connect the provided 2-meter power adapter to the feeder and plug it into a suitable outdoor power outlet.
• Battery Power: For wireless operation, install 4x AAA batteries (not included) into the battery compartment. Battery life typically ranges from 1 to 6 months depending on usage.

3. Filling the Feeder

• Open the waterproof snap-on lid.
• Fill the food container with your desired fish feed.
• Place a desiccant packet (not included) into the designated desiccant compartment to absorb moisture and keep the food fresh.
• Close the lid securely, ensuring the safety latches are engaged.

Operating Instructions

1. Understanding the Control Panel

The control panel features an LCD screen and buttons for MODE, SET, +, and -.

• MODE Button: Used to switch between different settings and modes.
• SET Button: Used to confirm selections and save settings.
• + / - Buttons: Used to adjust values (e.g., time, portions, frequency).

2. Programming Feeding Schedules

The feeder offers two programming modes: Lazy Mode and Precise Mode.

Lazy Mode (Pre-set Schedules)

Detailed steps for setting up Lazy Mode.

Lazy Mode provides nine pre-defined feeding programs for quick setup.

1. Press and hold the MODE, SET, and + buttons simultaneously for 3 seconds to enter Lazy Mode setup.
2. Use the + or - buttons to select a pre-set feeding schedule (e.g., 1d8 for 8 meals per day, 1d1 for 1 meal per day, 2d1 for 1 meal every 2 days, etc.).
3. Press SET to confirm the schedule.
4. The 'Vol.' (Volume) setting will flash. Use + or - to adjust the number of feed dispensations per feeding session (1-99 portions).
5. Press SET to finish and save the settings.

Precise Mode (Custom Schedules)

Precise Mode allows for up to 6 customized meals per day.

1. Press the MODE button twice to access the 'Timing' settings.
2. Use the + or - buttons to set the desired feeding time for each meal.
3. Press SET to confirm the time and move to the next meal or setting.
4. Adjust the 'Vol.' (Volume) for each meal as described in Lazy Mode (1-99 portions).
5. Repeat for up to 6 meals. Press SET to save all settings.

3. Adjusting Feed Portions

The feeder allows for precise portion control using the included feeding reduction clips. These clips can be inserted into the feed outlet chute to reduce the amount of food dispensed per rotation, allowing for finer adjustments between 2g and 8g per portion.

Maintenance

1. Cleaning Your Feeder

• Before cleaning, ensure the feeder is powered off and disconnected from any power source.
• Remove any remaining food from the container.
• Wipe the exterior of the feeder with a damp cloth. Do not use abrasive cleaners.
• The food container and feed chute can be detached and rinsed with water. Ensure they are completely dry before reassembling.
• Do not submerge the main unit (with the LCD screen and buttons) in water.

2. Desiccant Replacement

The desiccant packet in the desiccant container should be replaced periodically (e.g., every 1-2 months, or when it changes color if it's an indicating type) to maintain optimal moisture absorption and keep the fish food dry and fresh.

Troubleshooting

• Feeder not dispensing food: Check if the food container is empty. Ensure the feed chute is not blocked. Verify that the rotor is not jammed by clumping food (clean if necessary). Check power supply.
• LCD display not working: Ensure the feeder is properly connected to power (AC adapter) or that the AAA batteries are correctly installed and not depleted.
• Inaccurate feeding portions: Ensure the correct reduction clips are installed for your desired portion size. Verify programming settings for portions.
• Feeder tipping over: Ensure the foot supports are properly installed and secured with the provided nails, especially on uneven ground.
• Food getting wet: Ensure the lid is securely closed and the desiccant packet is fresh.

Specifications

Warranty and Support

Warranty Information

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or contact fishkeeper customer support for details regarding warranty coverage and terms.

Customer Support

For any questions, technical assistance, or warranty claims, please contact fishkeeper customer support through the retailer where you purchased the product or visit the official fishkeeper website for contact information.