Electric Bike 600C Display Panel User Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Electric Bike 600C Display Panel. Designed for seamless integration with a wide range of mid-drive motors (including M200, M300, M400, M410, M420, M500, M510, M600, M620, M800, and M820), this display enhances your electric biking experience with its vibrant 2.4-inch IPS color screen and advanced CAN protocol. It offers real-time data such as battery status, mileage, power, current, error codes, and speed metrics, all within a durable, IP65-rated design.

Safety Information

Please read all safety instructions carefully before using the display panel. Failure to follow these instructions may result in damage to the product, property, or personal injury.

• Ensure the display is securely mounted and all connections are firm before riding.
• Do not attempt to disassemble or modify the display panel. This may void the warranty and cause damage.
• Keep the display clean and dry. Avoid exposure to extreme temperatures or direct sunlight for prolonged periods.
• Always prioritize road safety. Do not operate the display or adjust settings while riding in traffic or hazardous conditions.
• If any error codes appear, consult the troubleshooting section or seek professional assistance.

Product Overview

The Electric Bike 600C Display Panel features a compact and robust design, providing essential riding information at a glance. It includes a 2.4-inch IPS color screen and intuitive control buttons.

Image: Front view of the Electric Bike 600C Display Panel, showing the vibrant IPS screen with speed, power, and battery indicators, along with control buttons on the left side.

Image: Side view of the Electric Bike 600C Display Panel, highlighting its compact form factor and cable connection.

Components:

• 2.4-inch IPS Color Screen: Displays all riding data clearly.
• Control Buttons: Typically include Power, Up (+), Down (-), and Mode (M) buttons for navigation and settings adjustment.
• Integrated Cable: For connection to the e-bike's mid-drive motor system.
• Mounting Bracket: For secure attachment to handlebars.

Setup

Installation:

1. Mounting: Securely attach the display panel to your bicycle's handlebars using the provided bracket. Ensure it is positioned for easy viewing and access to buttons.
2. Connection: Connect the display's cable to the corresponding port on your e-bike's mid-drive motor system. Ensure the connection is firm and waterproof.
3. Cable Management: Route the cable safely along the bike frame, securing it with cable ties to prevent interference with moving parts.

Initial Power-On:

After installation, press and hold the Power button to turn on the display. The screen will illuminate, showing the main interface.

Operating Instructions

Main Display Interface:

The main screen provides real-time information about your ride. This includes speed (Km/H or MPH), power output (W), battery level, assist level, and trip data.

Image: Examples of the main display interface, showing various data layouts including speed, power, battery status, and ODO/trip information.

Menu Navigation:

To access the settings menu, typically press and hold the 'M' (Mode) button or a combination of buttons. Use the '+' and '-' buttons to navigate through options and the 'M' or Power button to select.

Image: Overview of the display's main settings menu, showing options like Start password, Assist levels, Wheelsize, Battery voltage, Battery Indexes, and Pow Indexes.

8.2.1 Start Password:

This setting allows you to enable or disable a start password for the display. If enabled, you must input the correct password before the display powers on. The display will automatically shut down if the correct password is not entered within 30 seconds or if an incorrect password is entered 3 times.

Image: Screenshots illustrating the process of setting and inputting the start password, including the 'ON/OFF' toggle and numerical input fields.

8.2.2 Assist Levels:

Assist levels can be adjusted through software. The display supports 3, 5, 9, or UBE (6) levels, but cannot be set manually from the display itself.

8.2.3 Wheelsize:

The wheel size value is transmitted by the controller. This setting ensures accurate speed and distance readings.

8.2.4 Battery Voltage:

The battery voltage value is transmitted by the controller. If the controller does not support this feature, the display will show 'Automatic'.

8.2.5 Battery Indexes:

This item allows you to select how the battery level is displayed: OFF, Percent, or Voltage. The voltage displayed is the remaining voltage or percentage of the battery.

Image: Screenshots showing the Battery Indexes setting, allowing selection between Voltage, Percent, or OFF for battery display.

8.2.6 Pow Indexes:

The main page can be configured to display various power-related information, including Power (W), Current (A), Trip A, Range, and Clock.

8.2.7 Pow Range:

This setting supports output power range adjustments, with options such as 250W, 500W, 750W, 1000W, 1250W, 1500W, 1750W, and 2000W.

Image: Screenshots showing the Pow range setting menu and the Advanced setting password input screen.

8.3 Advanced Setting:

Advanced settings are password-protected to prevent illegal modification. The default password is '1919'. The password may vary according to specific requests. Inputting the correct password allows access to the advanced setting page, where the speed limit value of the controller transmission and error code information for the last 10 times can be viewed.

Speed Limit:

The speed limit can be set via the display. Note that the maximum speed limit is also determined by the motor and controller, and it may not always be possible to reach the set speed limit value if restricted by other components.

Image: Screenshots showing the Speed Limit setting and the Factory Setting confirmation screen.

8.4 Factory Setting:

Selecting 'YES' will restore all settings to factory defaults. This operation will delete all saved data. Note that ODO (odometer) and CLOCK data are not cleared during a factory reset.

8.5 Information:

The information display interface includes Speed and Mileage Information, and Product Information.

8.5.1 Product Information:

Product information shows Hardware Version, Software Version, and Date.

Maintenance

• Cleaning: Wipe the display screen and body with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Inspection: Periodically check all cable connections for wear or damage. Ensure the display is securely mounted.
• Storage: If storing the bike for an extended period, ensure the display is clean and dry. Store in a cool, dry place.

Troubleshooting

Specifications

• Item Package Dimensions L x W x H: 3.94 x 3.15 x 1.97 inches
• Package Weight: 97 Grams
• Brand Name: plplaaoo
• Model Name: plplaaooafgsxomteq
• Manufacturer: plplaaoo
• Part Number: plplaaooafgsxomteq
• ASIN: B0F5VGVTJN
• Date First Available: April 22, 2025
• Screen: 2.4 Inch IPS Color Screen
• Compatibility: Mid Drive Motors M200, M300, M400, M410, M420, M500, M510, M600, M620, M800, M820
• Protocol: CAN Protocol
• Waterproof Rating: IP65
• Material: ABS

Warranty and Support

Specific warranty information for this product is not provided in the available details. For warranty claims, technical support, or further assistance, please contact the manufacturer or your point of purchase directly. Keep your purchase receipt as proof of purchase.