Introduction
Thank you for choosing the HOMCOM TV Stand, Model 83B-286V00ND. This manual provides essential information for the safe assembly, proper use, and maintenance of your new TV stand. Please read all instructions carefully before assembly and retain this manual for future reference.
This TV stand is designed to accommodate televisions up to 65 inches, offering spacious storage with elegant fluted doors and integrated cable management to help keep your entertainment area organized.
Safety Information
WARNING: Failure to follow these safety instructions could result in injury or damage to the product.
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all parts are present and undamaged before beginning assembly. Do not use if any parts are missing or damaged.
- Do not overtighten screws, as this may damage the material.
- Keep small parts away from children during assembly.
- This TV stand is designed to support a maximum weight of 50 kg (total), 20 kg (top surface), and 5 kg (per shelf). Do not exceed these weight limits.
- For safety, it is recommended to secure the TV stand to a wall using an anti-tip kit (if provided or purchased separately) to prevent tipping, especially in households with children or pets.
- Do not allow children to climb on the TV stand.
- Place the TV stand on a level and stable surface.
Package Contents
Before assembly, verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer service.
Image: Illustration of the HOMCOM TV Stand package. Please check the included parts list against your package contents.
Note: A detailed parts list with labels will be provided in the physical assembly guide included with your product.
Setup and Assembly Instructions
Assembly of this TV stand requires two people and basic household tools (e.g., screwdriver). Follow the numbered steps in the physical assembly guide provided in the box. The following images illustrate key features and the assembled product.
Image: Fully assembled HOMCOM TV stand with doors open, showcasing internal compartments.
Key Assembly Steps (General Guidance):
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a protected surface.
- Assemble Frame: Connect the main panels (top, bottom, sides) using the provided hardware. Ensure all connections are secure.
- Install Shelves: Insert the internal shelves into their designated slots or attach them with fasteners.
- Attach Back Panel: Secure the back panel to the frame. Ensure cable management holes are correctly oriented.
- Install Doors: Attach the fluted doors to the cabinet using the hinges. Adjust hinges as needed for proper alignment and smooth operation.
- Attach Legs: Securely fasten the metal legs to the bottom of the TV stand.
- Final Check: Verify that all screws are tightened and the stand is stable.
Refer to the detailed diagrams in your product's included assembly manual for specific part identification and step-by-step instructions.
Operating Instructions
This TV stand is designed for straightforward use. Here are some tips for optimal functionality:
- Placing Your TV: Carefully place your television on the top surface, ensuring it is centered and stable. Do not exceed the maximum weight capacity of 20 kg for the top surface.
- Utilizing Storage: The three compartments with fluted doors provide ample space for media devices, accessories, and other items. Organize your belongings to maintain a clutter-free environment.
- Cable Management: Use the integrated cable pass-through holes located on the back panel to route and organize your device cables. This helps to keep wires tidy and prevents tangling.
- Door Operation: The fluted doors open and close smoothly. Avoid forcing them to prevent damage to hinges or the door panels.
Image: The TV stand with its fluted doors open, revealing three two-level storage compartments.
Image: Close-up view of the cable management holes on the rear panel, designed to organize electronic device wiring.
Maintenance
Proper care will extend the life and appearance of your HOMCOM TV stand.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
- Spills: Clean up spills immediately with a dry cloth to prevent staining or water damage.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration of the wood effect finish.
- Heat and Moisture: Keep the TV stand away from direct heat sources and areas of high humidity.
- Hardware Check: Periodically check all screws and fasteners to ensure they remain tight. Retighten if necessary.
Troubleshooting
If you encounter any issues with your TV stand, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand is wobbly or unstable. | Uneven floor; loose fasteners. | Ensure the stand is on a level surface. Check and tighten all assembly screws. |
| Doors do not align or close properly. | Hinges are loose or misaligned. | Adjust the door hinges. Refer to the assembly guide for hinge adjustment instructions. Tighten hinge screws. |
| Scratches or minor damage. | Accidental impact or abrasion. | For minor scratches, use a furniture repair pen or touch-up kit that matches the finish. |
If the problem persists or if you encounter an issue not listed here, please contact HOMCOM customer support.
Specifications
The following are the key specifications for the HOMCOM TV Stand, Model 83B-286V00ND:
Image: Visual representation of the TV stand's dimensions and maximum load capacity.
- Model Number: 83B-286V00ND
- Overall Dimensions (L x W x H): 120.5 cm x 35 cm x 59 cm (approximately 47.4 x 13.8 x 23.2 inches)
- Product Dimensions (Packaged): 130 cm x 50 cm x 15 cm (approximately 51.2 x 19.7 x 5.9 inches)
- Weight: 24 kg (approximately 52.9 lbs)
- Material: Engineered Wood, Metal
- Maximum Total Load Capacity: 50 kg (approximately 110 lbs)
- Maximum Top Surface Load Capacity: 20 kg (approximately 44 lbs)
- Maximum Shelf Load Capacity: 5 kg (approximately 11 lbs) per shelf
- Recommended TV Size: Up to 65 inches
- Origin: China
Warranty and Support
For warranty information, please refer to the documentation included with your purchase or visit the official HOMCOM website. If you require assistance with assembly, have questions about product functionality, or need to report missing/damaged parts, please contact HOMCOM customer support directly.
Customer Support: Please visit the HOMCOM store on Amazon or refer to the contact information provided in your product packaging.