Hover-1 Journey 2.0 Electric Scooter User Manual

Introduction

The Hover-1 Journey 2.0 Electric Scooter is designed for adults and teens seeking an efficient and enjoyable commuting solution. Equipped with a powerful 300W brushless motor, it offers a maximum speed of 16 mph and a range of up to 16 miles on a single charge. Its 8.5-inch air-filled tires provide a smooth ride, while the upgraded steering column and two-part folding mechanism enhance handling, stability, and portability. The scooter features a digital LED display for essential ride information and is UL2272 certified for safety.

Figure 1: The Hover-1 Journey 2.0 Electric Scooter.

Safety Guidelines

Your safety is paramount. Always adhere to the following guidelines when operating the Hover-1 Journey 2.0 Electric Scooter:

• Always wear a certified helmet and appropriate safety gear, including knee and elbow pads.
• Ensure the scooter is fully charged and all components are securely fastened before each ride.
• Do not exceed the maximum weight limit of 264 pounds (120 kg).
• Operate the scooter on smooth, dry surfaces. Avoid wet conditions, loose debris, or steep inclines beyond 15 degrees.
• Be aware of your surroundings and other pedestrians or vehicles. Follow all local traffic laws and regulations.
• Avoid sudden turns or maneuvers at high speeds.
• The scooter is UL2272 certified, indicating it has met safety standards for electric mobility devices.
• Note the "WARNING: DO NOT STEP HERE" sticker on the rear fender, indicating a critical area to avoid stepping on during operation.

Package Contents

Upon opening the package, verify that all the following items are included:

• Hover-1 Journey 2.0 Electric Scooter
• Hover-1 Wall Charger
• Journey 2.0 User Manual

Setup

Follow these steps to set up your Hover-1 Journey 2.0 Electric Scooter:

1. Unfold the Scooter: Carefully lift the steering column until it locks into the upright position. Ensure the folding lock mechanism is securely engaged. The upgraded 2-part folding mechanism with a safety latch provides enhanced stability.
2. Attach Handlebars: Insert the handlebars into the steering column and secure them with the provided bolts. Ensure they are tightened firmly.
3. Initial Charge: Before the first ride, fully charge the scooter's 36V/6Ah lithium-ion battery. Connect the Hover-1 Wall Charger to the charging port on the scooter and then to a power outlet. The charging indicator will show when charging is complete (approximately 5 hours).
4. Check Tire Pressure: The 8.5-inch air-filled tires require proper inflation for optimal performance and safety. Check the tire pressure and inflate if necessary according to the recommended PSI (usually found on the tire sidewall or in the quick start guide).

Figure 2: Key specifications of the Hover-1 Journey 2.0.

Operating Instructions

Familiarize yourself with the scooter's controls and functions before riding.

• Power On/Off: Press and hold the power button on the handlebars to turn the scooter on or off.
• Digital LED Display: The integrated display shows your current speed, battery level, and indicators for high-speed mode, cruise control, and headlight activation.
• Throttle: To accelerate, push off with one foot to gain initial momentum, then press the thumb throttle located on the right handlebar.
• Braking: Use the rear disc brake lever on the left handlebar to slow down or stop. The scooter features high-performance rear disc brakes for quick and safe stopping.
• Speed Modes: The scooter offers different speed modes. Refer to the display to switch between modes (e.g., Eco mode for lower speed, Sport mode for maximum speed).
• Headlight: Activate the headlight for improved visibility in low-light conditions. The headlight icon on the display will indicate its status.
• Folding: To fold the scooter for storage or transport, disengage the safety latch and folding lock mechanism on the steering column. Carefully fold the column down until it clicks into place.

Figure 3: Handlebar controls and digital display functions.

Figure 4: Portability and folding design of the scooter.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your scooter.

• Battery Care:
  • Charge the battery fully after each use, especially if storing for extended periods.
  • Avoid completely draining the battery, as this can reduce its lifespan.
  • Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures.
• Tire Maintenance:
  • Regularly check the pressure of the 8.5-inch air-filled tires. Proper inflation improves ride quality and prevents punctures.
  • Inspect tires for wear and tear, and replace them if necessary.
• Cleaning:
  • Wipe down the scooter with a damp cloth after use. Avoid using harsh chemicals or abrasive cleaners.
  • Do not use high-pressure water jets, as this can damage electronic components.
• General Inspection:
  • Periodically check all screws and bolts to ensure they are tight.
  • Inspect the brake system for proper function and adjust if needed.
  • Ensure the folding mechanism operates smoothly and securely.

Troubleshooting

If you encounter issues with your Hover-1 Journey 2.0, refer to the common problems and solutions below:

If the problem persists after attempting these solutions, please contact Hover-1 customer support for further assistance.

Specifications

Warranty and Support

The Hover-1 Journey 2.0 Electric Scooter comes with a 6-month limited warranty. This warranty covers manufacturing defects and issues arising from normal use. Please retain your proof of purchase for warranty claims.

For technical support, warranty inquiries, or replacement parts, please visit the official Hover-1 website or contact their customer service department. You can find more information and contact details on the Hover-1 Store Page.