Introduction
Thank you for choosing the oneisall PC18 Dog Clippers. This manual provides essential information for the safe and effective use and maintenance of your new grooming tool. Designed for various dog coat types, including thick, matted, knotted, fine, wavy, and curly hair, these clippers offer a quiet and efficient grooming experience.
What's Included
- oneisall PC18 Dog Clippers
- 6 Guard Combs (various sizes)
- Cleaning Brush
- Lubricating Oil
- Type-C USB Charge Cable
Key Features
- Effortlessly Cut All Coat Types: Pro-grade stainless steel blades and a 6800RPM motor provide 50% faster shaving for dense undercoats, curly tangles, or long fur.
- Stays Razor-Sharp Through Multiple Cuts: High hardness, corrosion-resistant stainless steel blade, usable for over 9,000 times. Designed for no snagging or pulling.
- Innovative Detachable Blade Design: Allows for easy cleaning and maintenance, preventing hair debris from hiding.
- Ultra-Quiet & Low Vibration: Operates at less than 50dB, making grooming a relaxing experience for nervous pets.
- Groom Anytime, Anywhere!: Cordless design offers freedom to trim indoors or outdoors without limitations.
- 240-Minute Long-Runtime: Powered by a robust 2000mAh battery, delivering up to 4 hours of cordless grooming, sufficient for multiple full haircuts on large dogs.
- LED Power Meter: Clear display of remaining battery life.
- Type-C Quick Charge: Fully recharges in just 1 hour.
- IPX7 Waterproof: Designed for easy cleaning under running water.
Image description: The oneisall PC18 Dog Clippers in action, smoothly cutting through a dog's fur, highlighting its effectiveness on various hair types.
Image description: A person grooming a dog with the oneisall PC18 clippers, emphasizing its quiet operation for anxious pets.
Setup and Preparation
Charging the Clippers
Before first use, fully charge the clippers using the provided Type-C USB cable. The LED display will indicate the battery percentage. A full charge takes approximately 1 hour and provides up to 240 minutes of runtime.
Image description: The oneisall PC18 clippers charging via a Type-C cable, highlighting its 2000mAh battery and 240+ minutes runtime.
Attaching Guard Combs
Select the desired guard comb based on the hair length you wish to achieve. Align the comb with the clipper blade and snap it securely into place. The clippers come with 6 guard combs for various lengths (3mm, 6mm, 10mm, 13mm, 16mm, 19mm).
Image description: A visual guide showing different guard comb sizes and their recommended use for various parts of a dog's body.
Adjusting Blade Length
The clippers feature a one-touch length adjust lever on the side, allowing for fine-tuning of the cutting length even without a guard comb.
Operating Instructions
Pre-Grooming Tips
- Ensure your pet's coat is clean, dry, and free of tangles or mats before grooming. Brush thoroughly to remove loose hair and debris.
- Introduce the clippers to your pet gradually. Turn them on and let your pet hear the low-noise operation and feel the vibration without actually clipping.
Grooming Process
- Hold the clippers firmly and move them in the direction of hair growth for a smooth, even cut.
- Use the appropriate guard comb for different areas of your pet's body (e.g., longer guards for the body, shorter for paws or face if desired).
- For thick or matted hair, work in small sections and consider a coarser guard comb initially.
- The powerful 6800RPM motor is designed to cut through various hair types without snagging or pulling.
Low Noise Operation
The oneisall PC18 clippers operate at less than 50dB, minimizing stress for nervous pets.
Video description: An official oneisall video demonstrating the PC18 Dog Clippers in use, showcasing its smooth cutting ability on various dog hair types and quiet operation.
Maintenance and Care
Cleaning the Blades
The detachable stainless steel blade is easy to clean. Press up to remove the blade, rinse it with water, and use the provided cleaning brush to remove any trapped hair. The IPX7 waterproof rating allows for direct rinsing of the blade head.
Image description: A four-panel image illustrating the steps to clean the clipper blades. Panel 1 shows pressing up to remove the blade. Panel 2 shows rinsing the detached blade under water. Panel 3 shows pressing down to install the blade. Panel 4 shows wiping the cleaned blade.
Oiling the Blades
Apply a few drops of the lubricating oil to the blades before and after each use to ensure smooth operation and prolong blade life.
Storage
Store the clippers and accessories in a dry, safe place when not in use.
Specifications
| Feature | Detail |
|---|---|
| Model | PC18 |
| Product Dimensions | 6.69 x 2.28 x 8.66 inches |
| Item Weight | 10.56 ounces |
| Battery Capacity | 2000mAh |
| Working Time | Up to 240 minutes (4 hours) |
| Charging Time | Approx. 1 hour (Type-C Quick Charge) |
| Motor Speed | 6800RPM |
| Blade Material | Stainless Steel |
| Noise Level | < 50dB |
| Waterproof Rating | IPX7 |
| Included Components | 6 Guard Combs, Cleaning Brush, Lubricating Oil, Type-C USB Charge Cable |
Important Safety Information
- Avoid use near water.
- Keep away from children.
- Use only for grooming dogs.
- Do not attempt to diagnose, treat, cure, or prevent any disease or health condition with this product.
Warranty and Support
730-Day Replacement Guarantee
During the 2-year warranty period, contact oneisall customer service for any issues with your PC18 dog clippers. oneisall will troubleshoot or replace your unit.
Customer Service
For further assistance or inquiries, please refer to the contact information provided in your product packaging or visit the official oneisall website.