ASPERX AX3000 3000A Portable Car Battery Jump Starter User Manual

1. Introduction

Thank you for choosing the ASPERX AX3000 Portable Car Battery Jump Starter. This device is designed to provide a quick and reliable solution for starting vehicles with dead batteries. It also functions as a portable power bank and an emergency LED light. Please read this manual thoroughly before use to ensure safe and optimal operation.

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to the device and vehicle:

• Do not attempt to jump-start a frozen battery.
• Ensure proper polarity connection (red clamp to positive, black clamp to negative). Incorrect connection can cause sparks or damage.
• Do not allow the smart clamps to touch each other once connected to the jump starter.
• Keep the device away from children.
• Do not expose the device to rain or extreme moisture.
• Do not disassemble the unit. Refer servicing to qualified personnel.
• Use the device in a well-ventilated area.
• Remove the jump starter from the vehicle battery within 30 seconds after the vehicle starts.
• Store the device in a cool, dry place when not in use.

3. Package Contents

Verify that all items are present in your package:

• ASPERX AX3000 Car Jump Starter x1
• Smart Jumper Cables x1
• USB-A to USB-C Data Cable x1
• Storage Case x1
• User Manual x1

Image 1: ASPERX AX3000 Jump Starter and included accessories. The image displays the main jump starter unit in black and red, smart jumper cables with red and black clamps, a USB-A to USB-C charging cable, and a black zippered storage case.

4. Product Overview

4.1 Main Unit Features

• High Capacity: 3000A peak current for starting up to 10.0L gas or 8.0L diesel engines.
• Multi-functional: Functions as a jump starter, portable power bank, and LED emergency light.
• Advanced Protection System: Incorporates over 8 types of safety protections against incorrect connections, short circuits, over-current, over-charge, etc.
• Portable Design: Compact and lightweight for easy storage and transport.
• LED Display: Indicates battery level and operational status.

4.2 Smart Jumper Cables

The included smart jumper cables feature an integrated protection system to ensure safe operation. They include indicators for correct connection and a "BOOST" button for extremely low-voltage batteries.

5. Setup: Charging the Jump Starter

Before initial use, fully charge the ASPERX AX3000 jump starter. It is recommended to charge the unit every 3-6 months to maintain battery health, even when not in use.

1. Locate the USB-C input port on the jump starter.
2. Connect the provided USB-A to USB-C data cable to the jump starter's USB-C port.
3. Connect the other end of the USB-A cable to a USB wall adapter (not included) or a powered USB port.
4. The LED indicators on the jump starter will illuminate to show the charging progress. All indicators will be solid when fully charged.

6. Operating Instructions: Jump Starting a Vehicle

Ensure the jump starter is at least 50% charged before attempting to jump-start a vehicle.

1. Prepare the Vehicle: Turn off the vehicle's ignition and all accessories (headlights, radio, air conditioning). Engage the parking brake.
2. Connect Smart Jumper Cables:
   • Insert the blue plug of the smart jumper cables firmly into the jump starter's output port.
   • Connect the RED positive (+) clamp to the vehicle's positive (+) battery terminal.
   • Connect the BLACK negative (-) clamp to the vehicle's negative (-) battery terminal.
   

   Image 2: Detail of the smart jumper cables connected to the jump starter unit. The blue connector is inserted into the jump starter, and the red and black clamps are ready for connection to a vehicle battery. The smart cable unit shows "correct" and "reverse" indicators, along with a "BOOST" button.

3. Check Indicator Lights: The smart cable unit will display an indicator.
   • If the "correct" indicator is green, proceed to the next step.
   • If the "reverse" indicator is red, disconnect the clamps and re-connect them with correct polarity.
   • If no indicator lights up, ensure the clamps have a good connection to the battery terminals.
4. Start the Vehicle: Once the green "correct" indicator is solid, start the vehicle's engine. If the vehicle does not start immediately, wait 10-15 seconds before trying again. Do not crank for more than 3 seconds per attempt.
5. Use BOOST Function (if needed): If the vehicle battery voltage is extremely low (below 9V) and the jump starter does not automatically detect it, press and hold the "BOOST" button on the smart cable unit for 3 seconds until the green light flashes. Then, start the vehicle within 30 seconds.
6. Disconnect: Once the vehicle starts, immediately disconnect the black negative (-) clamp first, then the red positive (+) clamp from the vehicle battery. Finally, unplug the smart jumper cables from the jump starter.

7. Other Functions

7.1 LED Flashlight

The ASPERX AX3000 includes a built-in LED light with three modes:

• Press the power button once to turn on the flashlight mode.
• Press again for Strobe mode.
• Press a third time for SOS mode.
• Press a fourth time to turn off the LED light.

7.2 Portable Power Bank

The jump starter can also charge your electronic devices:

• Connect your device's charging cable to the USB-A output port or the USB-C port (which supports both input and output) on the jump starter.
• The jump starter will automatically begin charging your device.

8. Maintenance

• Cleaning: Wipe the unit with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
• Storage: Store the jump starter in its protective case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Charging: To prolong battery life, fully charge the unit every 3-6 months, even if it has not been used.

9. Troubleshooting

10. Specifications

• Model: AX3000
• Peak Current: 3000 Amps
• Engine Compatibility: Up to 10.0L Gas / 8.0L Diesel
• Battery Type: Lithium Polymer
• Voltage: 12 Volts
• Operating Temperature: -4°F to 140°F (-20°C to 60°C)
• Dimensions: Approximately 7.09" x 3.54" x 0.98"
• Weight: Approximately 2.2 pounds
• Input/Output: Type-C (Input/Output), USB-A (Output)

11. Warranty and Support

ASPERX products are designed for reliability and performance. For any questions, technical support, or warranty claims, please contact ASPERX customer service through the retailer where the product was purchased or refer to the contact information provided in your product packaging.