3 in 1 New Touch Screen Digital Oscilloscope Digital Multimeter+Signal Generator

Introduction

This manual provides comprehensive instructions for the TOOLTOP TT-BSIDE-O2, a versatile 3-in-1 device integrating a digital oscilloscope, digital multimeter, and signal generator. Designed for professionals and enthusiasts, this instrument features a touch screen interface, dual-channel capabilities, and a robust design for various electrical testing and measurement applications.

What's in the Box

Image: The TOOLTOP TT-BSIDE-O2 device displayed alongside its standard accessories, including test leads, a USB charging cable, and a protective carrying case, illustrating the complete package contents.

Upon unboxing your TOOLTOP TT-BSIDE-O2, please verify that all the following items are present:

• TOOLTOP TT-BSIDE-O2 Main Unit
• Oscilloscope Probes (Quantity: 2)
• Multimeter Test Leads
• USB Charging Cable
• Protective Carrying Case
• User Manual (this document)

Key Features

Image: A detailed view of the device emphasizing its high-quality display, protective silicone casing, intuitive function wheel for navigation, and the versatile Type-C port for both data transfer and charging.

• 2-IN-1 Professional Digital Oscilloscope + DDS Function Signal Generator: Combines two essential tools into one compact device.
• High-Definition TFT Display: Features a 3.98-inch 480*320px resolution screen for clear waveform visualization.
• Built-in Rechargeable Battery: Equipped with a 3000mAh lithium battery (18650 battery*2) for extended portable use.
• Dual-Channel Oscilloscope: Offers 2X50MHz bandwidth and a 50MS/s real-time sampling rate for precise measurements.
• Signal Generator Capabilities: Generates signals from 0Hz to 2MHz with an output amplitude of 0.1V to 3.0V and a minimum resolution of 1Hz.
• Full Touchscreen Operation: Intuitive touch interface for easy navigation and parameter adjustment.
• Waveform Saving: Ability to save waveform data for later analysis.
• Firmware Upgrades: Supports firmware updates for enhanced functionality.
• Intelligent Anti-Burning Protection: Designed with safety features to prevent damage.
• Computer Mapping: Connects to a PC via USB for secondary analysis and data management.

Setup Guide

1. Initial Charging

Before first use, fully charge the device. Connect the provided USB cable to the Type-C port on the device and the other end to a standard USB power adapter (not included) or a computer USB port. The charging indicator will illuminate during charging and turn off when fully charged. A full charge typically takes approximately 3-4 hours.

2. Powering On/Off

To power on the device, press and hold the power button located on the side until the screen illuminates. To power off, press and hold the power button again until the device shuts down.

3. Basic Navigation

The device features a full touchscreen for most operations. Additionally, a function wheel is provided for precise adjustments and menu navigation. Rotate the wheel to scroll through options and press it to confirm selections.

Operating Instructions

1. Oscilloscope Mode

The oscilloscope function allows for the visualization and analysis of electrical signals over time.

1. Connecting Probes: Connect the oscilloscope probes to the BNC connectors labeled "OSC 1" and "OSC 2" on the top of the device. Ensure a secure connection.
2. Probe Calibration: For accurate measurements, it is recommended to calibrate the probes before use. Refer to the on-screen menu for probe calibration options.
3. Selecting Channels: Use the touchscreen to select the desired input channel (CH1 or CH2).
4. Adjusting Parameters:
   • Vertical Scale (Volts/Div): Adjust the voltage per division to fit the waveform vertically on the screen.
   • Horizontal Scale (Time/Div): Adjust the time per division to view the waveform's period or frequency.
   • Trigger Settings: Set the trigger level, slope, and mode (Auto, Normal, Single) to stabilize the waveform display.
5. Measurement Functions: The device can automatically measure various waveform parameters such as Vpp (peak-to-peak voltage), Vmax, Vmin, Vavg, RMS, Frequency, and Duty Cycle. Access these measurements via the on-screen menu.
6. Waveform Saving: Use the save function to store waveform data for later review or transfer to a computer.

2. Signal Generator Mode

The built-in signal generator can produce various waveforms for testing circuits.

Image: The device screen showing the signal generator menu, allowing users to select from various waveform types and precisely adjust frequency and amplitude settings for output.

1. Accessing Signal Generator: Navigate to the signal generator mode from the main menu.
2. Connecting Output: Connect the signal generator output lead to the designated port on the device.
3. Selecting Waveform Type: Choose from available waveform types (e.g., Sine, Square, Triangle, Sawtooth).
4. Setting Frequency: Adjust the output frequency from 0Hz to 2MHz using the touchscreen or function wheel.
5. Setting Amplitude: Adjust the output amplitude from 0.1V to 3.0V.
6. Outputting Signal: Activate the signal output to generate the configured waveform.

3. Multimeter Mode

The multimeter function provides standard electrical measurements.

1. Connecting Test Leads: Connect the red and black multimeter test leads to the appropriate input jacks on the device.
2. Selecting Measurement Function: Use the touchscreen to select the desired measurement function (e.g., DC Voltage, AC Voltage, Resistance, Continuity, Diode Test).
3. Performing Measurement: Apply the test leads to the circuit or component under test according to standard multimeter practices. The measurement will be displayed on the screen.

4. Data Management and PC Connection

Image: The device connected to a laptop, illustrating its capability to transfer saved waveform data and other measurement results to a computer for further analysis and storage.

The device supports connection to a PC via its Type-C USB port for data transfer and secondary analysis of waveform data. When connected, the device may appear as a mass storage device, allowing you to access saved files. Specific software or drivers may be required for advanced analysis; refer to the manufacturer's website for details.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the device. For stubborn dirt, a slightly damp cloth with mild detergent can be used, ensuring no liquid enters the ports or openings. Do not use abrasive cleaners or solvents.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. If storing the device for an extended period, charge it to approximately 50% and recharge every few months.
• Storage: Store the device in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity. Use the provided protective carrying case for transport and storage to prevent physical damage.
• Firmware Updates: Periodically check the TOOLTOP official website for available firmware updates. Keeping the firmware updated ensures optimal performance and access to new features.

Troubleshooting

Technical Specifications

Warranty and Support

The TOOLTOP TT-BSIDE-O2 comes with a manufacturer's warranty. For specific warranty terms and conditions, including duration and coverage, please refer to the warranty card included with your product or visit the official TOOLTOP website. Spare part availability is indicated for 1 year from the date of purchase.

For technical support, troubleshooting assistance beyond what is provided in this manual, or warranty claims, please contact TOOLTOP customer service directly. Contact information can typically be found on the manufacturer's website or on the product packaging.

Manufacturer: TOOLTOP