DALY BMS 24V 8S 200A LiFePO4 Smart Bluetooth Battery Protection Board User Manual

1. Introduction

This manual provides essential information for the safe and efficient use of your DALY BMS 24V 8S 200A LiFePO4 Smart Bluetooth Battery Protection Board. This device is designed to offer comprehensive protection for 24 Volt Lithium Battery Packs, ensuring optimal performance and extended battery life in various applications such as clean machines, RVs, and energy storage systems.

Image: DALY BMS 24V 8S 200A LiFePO4 Smart Bluetooth Battery Protection Board with an attached Bluetooth module.

2. Key Features

• Comprehensive Battery Protection: Includes low voltage cutoff, high voltage cutoff, short circuit protection, and temperature protection to safeguard your 8S 24V 200A battery systems.
• Smart Bluetooth Connectivity: Features a Bluetooth module for quick setup, real-time monitoring, configuration, and optimization of lithium battery systems. Monitor State of Charge (SOC), voltage, current, and receive critical notifications.
• Parallel System Support: The built-in parallel circuit supports 8+ battery packs, allowing for scalable capacity expansion.
• Multiple Interface Functions: Supports dual UART communication, BT module, and touch display (if applicable to your variant). Includes a Bluetooth activation-free function for easy connection via the app.
• Extended Warranty: Comes with a 5-year warranty.

Image: A comparison chart illustrating the advantages of DALY BMS, such as parallel capacity expansion, waterproof design, real-time status display, compact size, stable Bluetooth connection, dual UART ports, and a 5-year warranty.

3. Package Contents

Upon opening your DALY BMS package, please verify that all the following items are included:

• 8S 24V 200 Amps Smart BMS unit (x1)
• B-P-Output line (x1)
• Bluetooth dongle (x1)
• Sampling cable (x1)
• NTC temperature sensor (x1)
• Instruction Manual (x1)

Image: A visual representation of the DALY BMS package contents, including the BMS unit, cables, Bluetooth dongle, NTC sensor, and manual.

4. Setup and Installation

Proper installation is crucial for the safe and effective operation of your DALY BMS. Please follow these general guidelines and refer to the included manual for detailed, model-specific wiring diagrams and instructions.

1. Preparation: Ensure your battery pack is disconnected from any power sources. Gather necessary tools and safety equipment.
2. Mounting: Securely mount the BMS unit in a location that allows for adequate ventilation and protects it from physical damage or moisture.
3. Wiring: Connect the sampling cable to the battery cells in the correct sequence as specified in the detailed manual. Incorrect wiring can cause damage. Connect the B-P-Output line and NTC temperature sensor.
4. Bluetooth Module: Plug in the Bluetooth dongle to enable smart monitoring features.
5. Initial Power-Up: Carefully connect the main battery terminals to the BMS. Observe for any unusual behavior.

For detailed wiring diagrams and specific connection points, consult the physical instruction manual provided in your package.

Image: A DALY BMS unit integrated into a battery enclosure on a workbench, demonstrating a typical installation scenario.

5. Operating the Smart BMS (Bluetooth App)

The DALY Smart BMS features a Bluetooth module for convenient monitoring and configuration via a dedicated mobile application. This allows for real-time data access and system adjustments.

1. App Download: Download the official DALY BMS application from your device's app store.
2. Connection: Ensure Bluetooth is enabled on your mobile device. Open the DALY BMS app; the Bluetooth activation-free function allows the app to wake up the BMS for easy connection. Select your BMS from the list of available devices.
3. Monitoring: The app provides a comprehensive status display, showing battery voltage, current, individual cell voltages, temperature, and State of Charge (SOC).
4. Configuration: Access protection parameters and system settings to customize your BMS operation. This may include adjusting voltage thresholds, current limits, and other operational parameters.
5. Data Logging: The app may offer data logging features to track battery performance over time.

Image: Screenshots of the DALY Smart Bluetooth application interface, displaying battery status, protection parameters, and system settings.

6. Safety Protections

The DALY BMS is engineered with multiple safety features to protect your battery pack and connected equipment:

• Overcharging Protection: Prevents cells from being charged beyond their safe voltage limit.
• Overdischarging Protection: Stops discharge when cells reach their minimum safe voltage, preventing damage.
• Overcurrent Protection: Limits current during charge and discharge to prevent excessive loads.
• Short Circuit Protection: Automatically disconnects the battery in case of a short circuit.
• Extreme Temperature Protection: Monitors battery temperature and initiates protective measures if temperatures exceed safe operating ranges.

Image: A diagram visually representing the five core safety protections integrated into the DALY BMS: overcharging, overdischarging, overcurrent, short circuits, and extreme temperature protection.

7. Parallel System Support

The DALY BMS is designed to support multiple battery packs in parallel configurations. This feature allows you to increase the overall capacity of your battery system by simply adding more batteries, providing greater power and extended runtime for your applications.

Image: An illustration showing a DALY BMS connected to a large battery bank, demonstrating its capability to support multiple parallel battery systems for increased capacity.

8. Specifications

Image: A detailed table outlining various technical specifications of the DALY BMS, including protection values, current ratings, and equalization functions.

9. Troubleshooting

If you encounter issues with your DALY BMS, consider the following common troubleshooting steps:

• Connection Issues: Ensure all wiring is correct and secure. Verify the Bluetooth dongle is properly inserted and your mobile device's Bluetooth is active.
• App Not Connecting: Close and reopen the app. Restart your mobile device. Ensure the BMS is powered on.
• Battery Imbalance: If individual cell voltages are significantly different, the BMS's balancing function may be working. For persistent imbalance, consult the manual or DALY support.
• Protection Triggered: If the BMS enters a protection state (e.g., overvoltage, undervoltage, overcurrent), identify and resolve the underlying cause. The app may provide diagnostic information.
• General Performance: Ensure the BMS is adequately ventilated and operating within its specified temperature range.

For complex technical questions or issues not resolved by basic troubleshooting, it is recommended to contact DALY customer service for professional technical support.

Image: A Q&A guide addressing common questions about BMS selection and battery compatibility, including considerations for battery type, ampere rating, and monitoring needs.

10. Warranty and Support

The DALY BMS 24V 8S 200A LiFePO4 Smart Bluetooth Battery Protection Board comes with a 5-year warranty, reflecting the manufacturer's commitment to quality and reliability. For warranty claims, technical assistance, or any product-related inquiries, please contact DALY customer support. Refer to the contact information provided in your product packaging or on the official DALY website.

Image: A DALY BMS unit displayed alongside a shield graphic indicating a 5-year extended warranty.

11. Applications

The DALY BMS is suitable for a wide range of applications requiring reliable battery management for LiFePO4 battery packs:

• Recreational Vehicles (RVs)
• Marine Vessels
• Off-Grid Energy Storage Systems
• Portable Power Banks
• Electric Vehicles (e.g., Vans, ATVs)
• Industrial Clean Machines

12. Official Product Video