1. Safety Information
Please read and understand all safety instructions before assembling or using this product. Failure to follow these instructions may result in injury or damage to the product.
- Caution: Always use caution when assembling and moving the table due to its heavy weight (approximately 125 pounds).
- Stability: Secure the table on uneven surfaces to prevent tip-over risks. Use the adjustable foot pads to ensure stability.
- Assembly: It is highly recommended that two people assemble this table due to the weight of the components.
- Tools: Use only the tools provided or recommended by the manufacturer.
- Placement: Place the table on a flat, stable surface. Avoid placing it near heat sources or in direct sunlight for prolonged periods to prevent material degradation.
2. Package Contents
Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
The package includes all labeled pieces and necessary tools for assembly. Refer to the included assembly diagram for a complete list of components.
3. Setup & Assembly
Assembly of the Tribesigns 8FT Conference Table is straightforward but requires attention to detail. Follow these steps carefully.
3.1 Preparation
- Clear a spacious area for assembly.
- Unpack all components and lay them out on a soft, clean surface to prevent scratches.
- Identify all labeled pieces and ensure you have all the necessary tools as per the assembly guide.
- Important: Two people are recommended for assembly due to the heavy weight of the table boards and metal frames.
3.2 Assembly Steps
Strictly follow the directions provided in the included assembly manual. The process is designed to be completed within approximately one hour.
- Attach the heavy-duty powder-coated metal frame components to the table boards.
- Secure all connections firmly using the provided hardware and tools.
- Install the adjustable foot pads onto the bottom of the metal frames.
- Carefully flip the table upright with assistance.
- Adjust the foot pads to level the table and ensure stability on your floor surface.
Image: Construction details including splice particle board, heavy-duty metal frame, and adjustable foot pads.
4. Operating Instructions
4.1 Table Capacity and Usage
This 8FT conference table is designed to comfortably seat 8-10 people, making it suitable for large meetings, training sessions, or collaborative work environments. The spacious area beneath the table allows for comfortable legroom during extended periods of sitting.
Image: Overhead view of the conference table in use, demonstrating seating capacity.
4.2 Cable Management
The tabletop features two integrated grommet holes. These are designed to help manage and organize cables from laptops, monitors, and other electronic devices, contributing to a clean and clutter-free workspace.
Image: Detail of the two cable grommets for effective cable management.
4.3 Stability Adjustment
The adjustable foot pads on the table legs allow for fine-tuning the table's height and stability. Rotate the foot pads clockwise or counter-clockwise to compensate for uneven floors or carpets, ensuring a level and stable surface.
5. Maintenance
Proper care and maintenance will extend the life and appearance of your Tribesigns conference table.
- Cleaning: The table top features a waterproof melamine finish, making it scratch-resistant and easy to clean. Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Spills: Promptly wipe up any spills to prevent staining or damage to the wood particle board.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
- Movement: When moving the table, always lift it with assistance rather than dragging it to prevent damage to the legs or floor.
6. Troubleshooting
This section addresses common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly or uneven. | Foot pads are not properly adjusted or floor is uneven. | Adjust the foot pads on each leg until the table is stable and level. Ensure all leg connections are tight. |
| Parts missing or damaged upon arrival. | Shipping damage or packaging error. | Do not proceed with assembly. Contact Tribesigns customer support immediately for replacement parts. |
| Difficulty during assembly. | Instructions not followed correctly, or assembly attempted by one person. | Review the assembly instructions carefully. Ensure two people are assisting with assembly, especially for heavy components. |
If you encounter issues not listed here or require further assistance, please contact Tribesigns customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | XK00776 |
| Brand | Tribesigns |
| Product Dimensions (L x W x H) | 94.49 x 47.24 x 29.53 inches |
| Item Weight | 125 pounds |
| Material | E1 Particle Board (Wood), Powder-Coated Metal Frame |
| Color | Grey |
| Special Feature | Heavy Duty, Two Cable Grommets, Adjustable Foot Pads, Scratch-Resistant & Waterproof Melamine Finish |
| Seating Capacity | 8-10 people comfortably |
| Assembly Time (Approx.) | 1 hour (with 2 people) |
Image: Detailed dimensions of the conference table.
8. Product Overview Video
Watch this official product video for a visual overview of the Tribesigns Conference Table, highlighting its features and design.
Video: Tribesigns Conference Table for Office Meeting Room - A visual demonstration of the table's features and various color options.
9. Warranty & Customer Support
For information regarding product warranty, returns, or any other inquiries, please contact Tribesigns customer support directly. Refer to your purchase documentation or the official Tribesigns website for contact details.
Tribesigns Official Website: Visit Tribesigns Store on Amazon
