Gamrombo LED Wireless Controller (Model 0418)

1. Introduction

Thank you for choosing the Gamrombo LED Wireless Controller. This controller is designed to enhance your gaming experience across multiple platforms, including PlayStation 5 (PS5, PS5 Pro/Slim) and PC. It features vibrant LED lighting, dual vibration feedback, 6-axis motion sensing, and customizable buttons for optimal performance. Please read this manual carefully to ensure proper setup and operation.

2. Package Contents

• 1 x Gamrombo LED Wireless Controller
• 1 x USB-C Charging Cable

3. Controller Layout and Features

Figure 3.1: Multifunctional Controller Layout
This image displays the top view of the Gamrombo LED Wireless Controller with various buttons and ports labeled, including the Touchpad, Share, Cross key, Speaker, Left Stick, Turbo, 3.5mm Headphone Jack, Home button, Light button, Right Stick, R1, R2, L1, L2, USB Charging Port, PR, SET, and PL buttons.

Figure 3.2: Seven Light Colors and Three Light Modes
A close-up view of the controller's joysticks and face buttons, highlighting the customizable LED lighting. The image shows options for single color cycle, dazzling color change, single color mode, light off mode, and color memory function.

Figure 3.3: Ultimate Gaming Experience
This image illustrates the sensitive 6-axis somatosensory and sensitive 3D joystick features of the controller, with arrows indicating movement and responsiveness.

Figure 3.4: Controller with Sound
A visual representation of the controller's built-in speaker, showing sound waves. A note indicates that the controller has a speaker but no microphone, supporting wired and wireless sound.

• Ergonomic Design: Comfortable grip for extended gaming sessions.
• LED Lighting: Customizable RGB lighting around joysticks and face buttons with 7 color options and 3 light modes (Single Color Cycle, Dazzling Color Change, Single Color Mode). Features a light off mode and color memory function.
• Dual Vibration: Enhanced haptic feedback for immersive gameplay.
• 6-Axis Gyro Sensor: Provides precise motion control for supported games.
• 3.5mm Audio Jack: For connecting wired headphones. Note: The controller has a built-in speaker but no microphone.
• Programmable Buttons: Additional PR and PL buttons on the back can be programmed for macro and turbo functions.

4. Setup and Pairing

Figure 4.1: Multiple Devices Can Be Connected
This image shows the Gamrombo controller connected to a PS5 console and a laptop, illustrating its multi-device compatibility.

4.1 Initial Connection (Wired)

1. Connect the supplied USB-C cable to the controller's charging port.
2. Plug the other end of the USB-C cable into an available USB port on your PS5 console or PC.
3. The controller will automatically connect and begin charging.

4.2 Wireless Pairing

After the initial wired connection, the controller should automatically pair wirelessly with your device. To activate the controller and connect wirelessly:

1. Ensure the controller is charged.
2. Press the Home button (house icon) on the controller.
3. The controller will power on and attempt to connect to the last paired device.

5. Operating Instructions

5.1 LED Lighting Control

The controller features customizable LED lighting. To cycle through the different colors and modes:

• Press the Light button located near the Home button.
• Each press will cycle through 7 different colors and 3 lighting modes (Single Color Cycle, Dazzling Color Change, Single Color Mode).
• Continue pressing to reach the 'Light off' mode if desired.
• The controller remembers your last selected color setting.

5.2 Macro and Turbo Functions

The PR and PL buttons on the back of the controller can be programmed for macro and turbo functions to provide a competitive edge in games. Refer to the detailed instructions in the included quick start guide for specific programming steps.

6. Charging

The controller is equipped with a built-in 1000mAh battery, providing over 10 hours of gameplay on a single charge. It supports USB-C fast charging, allowing for a full charge within approximately 3 hours.

• Connect the USB-C charging cable to the controller and a power source (e.g., PS5 console, PC, or USB wall adapter).
• The LED indicator on the controller will show charging status.

7. Troubleshooting

7.1 Connection Issues

• Ensure the USB-C cable is securely connected to both the controller and the device.
• For initial PS5 connection, ensure the controller is activated with the included USB-C cable.
• Verify that the controller is sufficiently charged.

7.2 Button/Joystick Unresponsiveness

• Check for any physical obstructions or debris around the buttons or joysticks.
• Restart the controller and the connected device.

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the product packaging or contact Gamrombo customer service directly. Keep your purchase receipt for warranty claims.