Introduction
Thank you for choosing the ENGWE EP-2 Pro Electric Folding Bike. This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your new electric bicycle. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.
Safety Information
Your safety is paramount. Always adhere to the following guidelines:
- Always wear a helmet that meets safety standards.
- Obey all local traffic laws and regulations.
- Perform a pre-ride inspection before each use, checking brakes, tires, and battery level.
- Do not ride under the influence of alcohol or drugs.
- Be aware of your surroundings and ride defensively.
- Avoid riding in adverse weather conditions, such as heavy rain or snow.
- Ensure the bike is properly folded and secured when transporting.
Setup and Assembly
Your ENGWE EP-2 Pro electric bike comes 85% pre-assembled. The following steps will guide you through the final assembly.
Included Tools:
- Tool Kit
Assembly Steps:
- Unfolding the Frame: Carefully unfold the main frame of the bicycle until it locks into place. Secure the folding mechanism latch.
- Handlebar Installation: Insert the handlebar stem into the fork tube and tighten the quick-release lever or bolts securely. Adjust the handlebar height to your comfort.
- Pedal Attachment: Identify the left (L) and right (R) pedals. Thread the 'L' pedal counter-clockwise into the left crank arm and the 'R' pedal clockwise into the right crank arm. Tighten firmly with a wrench.
- Seat Post Adjustment: Insert the seat post into the frame and adjust the height to ensure your feet can comfortably touch the ground when stopped. Secure with the quick-release lever.
- Tire Inflation: Inflate the 20''x4.0" fat tires to the recommended pressure indicated on the tire sidewall.
- Brake Check: Ensure both front and rear disc brakes are functioning correctly and the levers provide firm resistance.
- Battery Installation: If the battery is not pre-installed, slide it into its compartment until it clicks securely. Ensure it is locked with the key if applicable.
The ENGWE EP-2 Pro Electric Folding Bike in its assembled state, showcasing its robust frame and fat tires.
Operating Your ENGWE EP-2 Pro
Battery and Charging:
The bike is equipped with a powerful 48V 13Ah removable battery, offering a maximum range of up to 120KM with pedal assist. To charge, connect the charger to the battery port and a power outlet. The indicator light on the charger will show charging status. Always use the original charger provided.
Illustration of the long-range 48V 13Ah removable battery, capable of up to 120KM range.
Display and Controls:
The integrated LED color display provides real-time information including speed, battery level, and mileage. It helps you monitor your ride data effectively.
The advanced LCD display showing speed, battery level, and trip mileage, along with the 55Nm Power-Boost Button.
Riding Modes and Gears:
The EP-2 Pro offers three riding modes:
- Pure Electric Mode: Provides motor assistance without pedaling.
- Pedal Assist Mode: The motor provides assistance as you pedal, with varying levels of support.
- Normal Bike Mode: Ride like a traditional bicycle without any motor assistance.
The 7-speed transmission system allows you to easily shift gears to adapt to different terrains and riding conditions.
Power-Boost Button:
The bike features a 55Nm Power-Boost Button designed for increased comfort and riding pleasure, especially when accelerating or climbing hills. This button provides an instant surge of power.
Visual representation of the Power-Boost feature, highlighting the 55Nm torque for uphill assistance. Note: Throttle handlebars are illegal for EU roads.
Braking System:
Equipped with 180mm dual disc brakes, the EP-2 Pro provides responsive and sensitive stopping power for enhanced safety.
Terrain Adaptability:
With 20''x4.0" fat tires and dual suspension (front suspension), this e-bike is designed to handle various terrains, from paved roads to gravel paths and dirt tracks, ensuring a comfortable ride.
The ENGWE EP-2 Pro is built for all terrains, including asphalt, sand, gravel, and dirt roads, thanks to its 20x4.0 inch fat tires and front suspension.
Cargo Features:
The bike is equipped with a rear rack and mudguards, making it a reliable partner for urban commuting and carrying essentials, with a capacity of up to 150kg.
The ENGWE EP-2 Pro is equipped with 180mm disc brakes, a rear rack, and mudguards, making it suitable for urban delivery with a 150kg capacity.
Maintenance
Regular maintenance ensures the longevity and safe operation of your e-bike.
- Cleaning: Regularly clean your bike with a damp cloth. Avoid high-pressure washing directly on electrical components.
- Tires: Check tire pressure before each ride and inflate to the recommended PSI. Inspect tires for wear and tear.
- Brakes: Periodically check brake pads for wear and ensure brake levers are firm. Adjust or replace as needed.
- Chain: Keep the chain clean and lubricated to ensure smooth gear changes and prevent rust.
- Battery Care: Store the battery in a cool, dry place. Charge it regularly, even if not in use, to maintain battery health. Avoid fully discharging the battery.
- Fasteners: Periodically check all bolts, nuts, and quick-release levers to ensure they are securely tightened.
Troubleshooting
This section addresses common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike not powering on | Battery not charged, battery not properly seated, power cable loose | Charge battery, ensure battery is fully inserted and locked, check all cable connections. |
| Motor not assisting | Low battery, incorrect riding mode, sensor issue | Check battery level, switch to pedal assist or pure electric mode, inspect sensor connections. |
| Brakes feel weak | Worn brake pads, loose cable, air in hydraulic system (if applicable) | Inspect and replace brake pads, tighten brake cable, consult a professional for hydraulic brake bleeding. |
| Gears not shifting smoothly | Dirty or unlubricated chain, misaligned derailleur | Clean and lubricate chain, adjust derailleur (refer to specific derailleur manual or professional). |
Specifications
| Feature | Detail |
|---|---|
| Model Number | EP-2 BOOST |
| Recommended Age | Adults |
| Bicycle Type | City Bike |
| Brake Type | Disc Brake |
| Color | Orange |
| Frame Material | Aluminum |
| Frame Dimensions | 169*57*120cm |
| Number of Speeds | 7 |
| Power Source | Rechargeable Battery |
| Wattage | 624 Watt-hours |
| Suspension Type | Front Suspension |
| Wheel Size | 20 Inches |
| Special Features | Fat Tires, Dual Suspension, Powerful Electric System, Advanced LCD Display |
| Included Components | Tool Kit |
Warranty and Support
ENGWE provides reliable customer support for your EP-2 Pro electric bike.
- Warranty: We offer a one-year warranty on the motor, battery, and controller.
- Customer Service: Our customer service team is available 24/7 to answer your questions and provide assistance.
For any inquiries or support, please refer to the contact information provided with your purchase or visit the official ENGWE website.
