Important Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Always ensure the awning is properly anchored and stable to prevent tipping.
- Do not use in high wind conditions. Retract the awning during strong winds, heavy rain, or snow to prevent damage.
- Assembly requires at least two people due to the large size and weight of components.
- Regularly inspect all parts for wear and tear. Replace damaged components immediately.
- Ensure the area around the awning is clear of obstructions during operation.
Product Overview
The AECOJOY Free Standing Retractable Awning provides versatile sun and rain protection for various outdoor settings. Its dual-sided design offers extensive coverage, making it suitable for patios, gardens, carports, and commercial spaces.
- Material: 100% 280g/m³ Polyester Fabric, UV-resistant, wrinkle-resistant, fade-resistant, mildew-proof.
- Dimensions: 13'x10' (Dual Side), 120"D x 156"W x 102"H.
- Operation Mode: Manual, with hand crank for angle adjustment and retraction.
- Structure: Iron-aluminum columns for stability.
Image: The AECOJOY Free Standing Retractable Awning providing shade over a patio seating area, demonstrating its large coverage.
Image: The awning extended to cover two vehicles in a driveway, highlighting its versatility for carports.
Assembly Instructions
Assembly of the AECOJOY Free Standing Retractable Awning requires careful attention to detail and the assistance of at least two individuals. Ensure all components are present before beginning.
Package Contents:
Your awning comes in one box. Carefully unpack all components and verify against the parts list provided in the physical manual. If any parts are missing or damaged, contact customer support immediately.
Tools Required (Not Included):
- Adjustable Wrench
- Measuring Tape
- Level
- Safety Gloves
Step-by-Step Assembly:
- Unpack and Identify Parts: Lay out all components on a clean, flat surface. Refer to the parts diagram in your physical manual to identify each piece.
- Assemble Base Supports: Connect the base components according to the diagram. Ensure all bolts are securely tightened.
- Attach Vertical Columns: Secure the vertical iron-aluminum columns to the assembled bases. Use a level to ensure they are perfectly upright.
- Install Main Awning Frame: With assistance, carefully lift and attach the main awning frame to the top of the vertical columns. Ensure all connection points are robustly fastened.
- Mount Fabric and Roller: Slide the awning fabric onto the roller and secure it to the frame as per the instructions. Ensure the fabric is evenly distributed and taut.
- Attach Hand Crank Mechanism: Install the hand crank mechanism, ensuring it engages correctly with the roller for smooth operation.
- Final Adjustments: Extend and retract the awning a few times to ensure smooth operation. Adjust the angle as desired using the hand crank.
Image: A diagram illustrating the product dimensions, including length, width, and height, which is crucial for assembly and placement.
Image: A detailed view of the hand crank and the three reserved hole positions for effortless angle adjustment of the awning.
Operating Instructions
Extending the Awning:
To extend the awning, turn the hand crank clockwise. Continue turning until the awning reaches the desired extension or full extension. Do not force the mechanism beyond its natural stopping point.
Retracting the Awning:
To retract the awning, turn the hand crank counter-clockwise. Ensure the fabric rolls up smoothly and evenly. Fully retract the awning when not in use, especially during adverse weather conditions.
Adjusting the Angle:
The awning features adjustable angle positions. Use the hand crank to adjust the tilt of the awning to optimize shade coverage. There are three pre-drilled positions, and additional holes can be drilled if needed for specific requirements.
Image: Close-up of the 280g/m² polyester fabric, demonstrating its water-resistant properties and durability against sun and rain.
Maintenance and Care
Proper maintenance will extend the life of your AECOJOY awning.
- Cleaning: Clean the fabric with mild soap and water. Do not use harsh chemicals or abrasive cleaners. Rinse thoroughly and allow to air dry completely before retracting.
- Frame Inspection: Periodically check all bolts and connections to ensure they are tight. Tighten any loose fasteners.
- Fabric Inspection: Inspect the fabric for any tears, holes, or signs of wear. Address minor damage promptly to prevent further deterioration.
- Lubrication: Lightly lubricate moving parts of the retraction mechanism annually with a silicone-based spray to ensure smooth operation.
- Winter Storage: In areas with heavy snow or ice, it is recommended to fully retract the awning and, if possible, store it indoors or cover it to protect it from extreme weather.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Awning does not extend/retract smoothly. | Mechanism is dirty or lacks lubrication; fabric is misaligned. | Clean and lubricate the mechanism. Check fabric alignment and adjust if necessary. |
| Awning sags or collects water. | Insufficient tension; incorrect angle; fabric stretched. | Adjust the angle to allow for proper water runoff. Ensure fabric is taut. Consider adding extra base weights for stability. |
| Awning is unstable in light wind. | Insufficient base weight; improper anchoring. | Add additional base weights (e.g., 4-pcs umbrella stand & base that can bear at least 200 pounds). Ensure proper anchoring as per instructions. |
Specifications
| Feature | Detail |
|---|---|
| Brand | AECOJOY |
| Model Number | Free Standing Retractable Awning |
| Material | 100% 280g/m³ Polyester Fabric |
| Color | Dark Grey |
| Size | 13'x10' (Dual Side) |
| Product Dimensions (D x W x H) | 120" x 156" x 102" |
| Operation Mode | Manual |
| Assembly Required | Yes |
Warranty and Support
For warranty information, missing parts, or technical support, please contact AECOJOY customer service. Refer to the contact details provided with your product packaging or visit the official AECOJOY website.
Online Support: The manufacturer provides online support to assist with any issues during assembly or use.
