Product Overview
The SKB iSeries Shaped Bow Case is designed to provide robust protection for your archery equipment. Constructed from military-grade materials, this case offers a streamlined, curved shape that minimizes bulk while maximizing interior storage for bows, arrows, and accessories. It is built to withstand harsh environmental conditions, ensuring your gear remains secure and protected during transport and storage.
Key features include:
- Curved Bow Design: Engineered to fit bows up to 41 inches long and 17 inches wide, reducing overall bulk.
- Rugged Protection: Military-grade, waterproof, crushproof, and resistant to UV, impact, dust, and corrosion.
- Secure Storage: Features hook-and-loop straps for bow retention, a dedicated compartment for up to 12 arrows, and mesh lid pockets for accessories.
- Travel-Ready: Equipped with a Trigger Latch system and stainless steel padlock protector clips for enhanced security.
- Comfortable Handling: Includes a snap-down cushion grip handle and an ambient pressure equalization valve for high-altitude travel.
Figure 1: The SKB iSeries Shaped Bow Case in its closed state, showcasing its compact and durable exterior.
Setup and Storage
- Opening the Case: Locate the Trigger Latch system latches on the front of the case. Press the release buttons and lift the latches to open the case.
- Placing the Bow: Carefully place your compound bow into the main compartment. Ensure the bow fits within the internal dimensions of 41 inches length and 17 inches width.
Figure 2: Illustration of the internal dimensions (Length 41", Width 17", Depth 6") for proper bow placement.
- Securing the Bow: Utilize the integrated hook-and-loop tie-down straps to firmly secure your bow in place, preventing movement during transport.
- Arrow Storage: Place up to 12 arrows in the dedicated lower compartment designed for arrow storage.
- Accessory Storage: Use the two mesh lid pockets to store accessory boxes, quivers, or other essential hunting gear.
Figure 3: The interior of the case, demonstrating the secure placement of a bow, arrows, and the use of mesh accessory pockets.
- Closing the Case: Ensure all items are properly secured and the lid is aligned. Press down firmly on the lid until the Trigger Latches snap securely into place.
Operating the Case
The SKB iSeries Shaped Bow Case is designed for ease of use and maximum protection.
- Carrying: Use the snap-down cushion grip handle for comfortable and secure carrying.
Figure 4: The ergonomic snap-down cushion grip handle for comfortable transport.
- Security: For added security, utilize the stainless steel padlock protector clips. These loops are designed to accept a customer-supplied lock.
Figure 5: The locking loops allow for the addition of a customer-supplied padlock for enhanced security.
- Pressure Equalization: The automatic ambient pressure equalization valve self-regulates internal pressure, which is particularly useful during high-altitude travel or changes in atmospheric pressure. This ensures the case remains sealed and protected.
Maintenance
The SKB iSeries Shaped Bow Case is built for durability and requires minimal maintenance. Following these guidelines will help ensure its longevity:
- Cleaning: Wipe down the exterior and interior surfaces with a damp cloth and mild soap as needed. Avoid harsh chemicals or abrasive cleaners, which can damage the polypropylene material.
- Gasket Seal Inspection: Periodically inspect the complete gasket seal around the lid for any signs of wear, cracks, or debris. A clean and intact gasket ensures the case remains watertight and dustproof.
Figure 6: The complete gasket seal ensures the case is watertight and dustproof.
- Latch Functionality: Ensure the Trigger Latches operate smoothly and securely. If they become stiff, a small amount of silicone lubricant can be applied.
- Storage: When not in use, store the case in a cool, dry place away from direct sunlight to preserve the integrity of the materials.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Case does not close securely. | Obstruction in the seal area; latches are misaligned or stiff; contents are overfilling the case. | Check the gasket seal for debris and clean if necessary. Ensure contents are not overfilling the case. Verify latches are aligned and apply silicone lubricant if stiff. |
| Bow or accessories shift inside the case. | Hook-and-loop straps are not tightened sufficiently; items are not properly positioned. | Ensure all hook-and-loop straps are securely fastened. Reposition items to fit snugly within the designated compartments. |
| Difficulty opening latches. | Latches are stiff or dirty; pressure differential inside the case. | Clean latches and apply a small amount of silicone lubricant. Allow the ambient pressure valve to equalize pressure, especially after changes in altitude or temperature. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | SKB Cases 3i-4318-pl: Iseries Shaped Bow Case |
| Part Number | 3I-4318-PL |
| Brand | SKB |
| Material | Ultra High-Strength Polypropylene Plastic |
| Shell Type | Hard |
| Color | Black |
| Closure Type | Hook & Loop, Trigger Latch System |
| Internal Dimensions (L x W x D) | 41" x 17" x 6" |
| Exterior Dimensions (L x W x H) | 45" x 21.5" x 9.5" |
| Weight | 18 lbs (9.87 Kilograms) |
| Number of Compartments | 4 (Main, Arrow, 2 Mesh Lid Pockets) |
| Special Features | Waterproof, Crushproof, Dustproof, Corrosion Resistant, UV Resistant, Automatic Ambient Pressure Equalization Valve, Snap-Down Cushion Grip Handle, Lockable Latches |
| UPC | 789270008113 |
Warranty and Support
For detailed warranty information and product support, please refer to the official SKB website or contact SKB customer service directly. SKB products are known for their robust construction and often come with comprehensive warranties.
SKB Official Website: www.skbcases.com
Please have your model number (3I-4318-PL) and UPC (789270008113) available when contacting support.
