Aroepurt Phone Case with Tempered Glass Screen Protector for Ans Artia SP545C SL003AS (Model YGH-MXX)

1. Introduction

The Aroepurt phone case for Ans Artia SP545C SL003AS (Model YGH-MXX) offers comprehensive protection and enhanced functionality. It features a dual-layer design with a hard PC back panel and a soft silicone frame, integrated shock airbags, a luminous effect, and a versatile finger ring support. This product also includes a tempered glass screen protector for additional display protection.

2. What's in the Box

• 1 x Aroepurt Phone Case (Model YGH-MXX)
• 1 x Tempered Glass Screen Protector

3. Setup

3.1 Installing the Phone Case

1. Ensure your phone is clean and free of dust or debris.
2. Gently insert your Ans Artia SP545C SL003AS phone into the soft silicone frame of the case.
3. Press firmly around the edges to ensure the phone is securely seated within the hard PC back panel and silicone frame. The case is designed with four-corner shock airbags for enhanced protection.

Image: The phone case features reinforced corners with shock airbags for impact absorption.

3.2 Installing the Tempered Glass Screen Protector

1. Clean the Screen: Use the provided cleaning wipes (if included, otherwise a microfiber cloth) to thoroughly clean your phone's screen. Ensure no dust, smudges, or fingerprints remain.
2. Align the Protector: Carefully peel off the protective film from the adhesive side of the tempered glass. Align the screen protector with your phone's screen, paying attention to cutouts for the speaker and camera.
3. Apply: Once aligned, gently lower the screen protector onto the screen. It will adhere automatically.
4. Remove Bubbles: Use a clean cloth or squeegee to push any air bubbles towards the edges of the screen.

Image: Key features of the tempered glass screen protector, including 9H hardness and shatterproof design.

Image: The scratch-proof screen protector is designed to resist damage from sharp objects.

4. Operating Instructions

4.1 Using the Finger Ring Support

The integrated metal finger ring on the back of the case provides a secure grip and acts as a kickstand. It can rotate 360 degrees and flip 180 degrees, allowing for comfortable one-hand operation and hands-free viewing in various orientations.

Image: The finger ring support facilitates easier one-hand operation of the phone.

4.2 Magnetic Car Mount Compatibility

The case features a built-in metal plate within the ring support, making it compatible with magnetic car mounts. Simply attach your phone (with the case) to a magnetic car mount for secure navigation or hands-free use while driving.

Note: A magnetic car mount is not included with this product. This case does not support wireless charging due to the metal ring.

Image: The case's ring support is designed for compatibility with magnetic car mounts.

4.3 Luminous Effect

The case features a special material that absorbs light and sunlight. In a dark environment, this absorbed energy is released, producing a fluorescent or luminous effect. Exposure to light sources will recharge this effect.

Image: The phone case exhibits a luminous glow in dark conditions after light absorption.

5. Maintenance

5.1 Cleaning the Phone Case

• Remove the phone from the case before cleaning.
• Wipe the case with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used.
• Avoid harsh chemicals or abrasive cleaners, as these can damage the case's finish or luminous properties.
• Ensure the case is completely dry before reinserting your phone.

5.2 Cleaning the Screen Protector

• Use a microfiber cloth to gently wipe away fingerprints and smudges.
• For deeper cleaning, lightly dampen the cloth with water or a screen cleaner specifically designed for electronics.
• Do not use paper towels or rough materials, as they can scratch the protector.

6. Troubleshooting

• Screen Protector Bubbles: If bubbles appear after installation, gently lift the nearest edge of the protector and re-apply, pushing the air out with a clean cloth. Ensure the screen is free of dust before re-application.
• Ring Stand Stiffness/Looseness: The ring stand is designed for durability. If it feels too stiff or loose over time, ensure it is clean and free of debris. Avoid excessive force when rotating.
• Luminous Effect Not Visible: Ensure the case has been exposed to sufficient light (natural sunlight or artificial light) for a period to absorb energy. The effect is only visible in dark environments.

7. Specifications

8. Warranty and Support

For warranty information or product support, please contact Aroepurt customer service through the retailer where the product was purchased. Please have your purchase details and product model (YGH-MXX) available when contacting support.