Introduction
The OKP Life K5 Ultra is an advanced robot vacuum and mop combo designed to provide efficient and intelligent cleaning for your home. Featuring ToF LiDAR navigation and 6000Pa suction power, it offers precise object detection and powerful cleaning across various floor types. With its 3-in-1 functionality (sweeping, vacuuming, and mopping), app control, and voice assistant compatibility, the K5 Ultra simplifies your daily cleaning routine. Its ultra-thin design allows it to navigate under furniture, while intelligent carpet detection and anti-tangle features ensure a thorough clean, even in pet-friendly homes.
Figure 1: The OKP Life K5 Ultra Robot Vacuum and Mop Combo, showcasing the main unit, charging dock, and various cleaning accessories including side brushes and mop pads.
Safety Information
Please read all safety instructions carefully before using your OKP Life K5 Ultra.
- Ensure the charging dock is placed against a wall in an open area, free from obstacles.
- Keep the robot and its accessories away from water and moisture.
- Do not use the robot to pick up large debris, liquids, or burning objects.
- Supervise children and pets when the robot is operating.
- Regularly check and clean the brushes and dustbin to maintain optimal performance and prevent damage.
- Avoid placing the robot on elevated surfaces where it could fall without proper edge detection.
Figure 2: The K5 Ultra features anti-collision and anti-fall technology, ensuring safe operation around furniture and stairs.
What's in the Box
Your OKP Life K5 Ultra package includes the following components:
- 1x OKP Life K5 Ultra 3-in-1 Vacuum Mop Combo
- 1x Charging Dock
- 1x Instruction Guide
- 1x Magnetic Mop Stand
- 1x Disposable Mop Pads
- 1x 500ml Dust Box (pre-installed)
- Side Brush (set of 2, typically 1 installed, 1 spare)
Setup
1. Charging Dock Placement
Place the charging dock on a hard, level surface against a wall. Ensure there is at least 1.5 feet (0.5 meters) of clear space on both sides of the dock and 5 feet (1.5 meters) in front of it for optimal navigation. Plug the power adapter into the charging dock and then into a wall outlet.
2. Initial Charge
Place the K5 Ultra robot onto the charging dock. Ensure the charging contacts on the robot align with those on the dock. The indicator light on the robot will show charging status. Allow the robot to fully charge before its first use (approximately 4-5 hours).
Figure 3: The K5 Ultra automatically returns to its charging dock when its battery is low, ensuring it's always ready for the next cleaning session.
3. App Connection (Optional but Recommended)
Download the "OKP" app from your smartphone's app store. Follow the in-app instructions to connect your K5 Ultra to your home's 2.4GHz Wi-Fi network. The app allows for advanced features such as scheduling, cleaning mode selection, and real-time monitoring.
Figure 4: Control your K5 Ultra conveniently through the OKP app, allowing for scheduling, mode selection, and monitoring.
Operating Instructions
Starting a Clean
Press the power button on the robot or use the OKP app to start a cleaning cycle. The robot will automatically select the optimal cleaning path using its ToF LiDAR navigation.
Figure 5: The K5 Ultra utilizes 360° intelligent ToF navigation for precise laser-guided cleaning, ensuring no spots are missed.
Cleaning Modes
The K5 Ultra offers several cleaning modes, selectable via the OKP app:
- Auto Clean: The robot intelligently navigates and cleans the entire accessible area.
- Spot Clean: Focuses on a specific dirty area, cleaning in a spiral pattern.
- Edge Clean: Cleans along walls and furniture edges.
- Schedule Clean: Set specific times for the robot to automatically start cleaning.
Figure 6: The K5 Ultra supports various cleaning patterns including zig-zag, spot, edge, and random cleaning, adaptable to different needs.
Carpet Detection & Auto Boost
The robot automatically detects carpets and increases suction power for deeper cleaning. When the mop is attached, it will avoid carpets to prevent wetting them.
Figure 7: Automatic carpet detection allows the K5 Ultra to boost suction for effective deep cleaning on rugs and carpets.
Voice Control
The K5 Ultra is compatible with Amazon Alexa and Google Assistant. Link your robot to your smart home system to start, stop, or send the robot back to its dock using voice commands.
Obstacle Avoidance
Equipped with 9 precision PSD sensors and ToF laser technology, the K5 Ultra offers 190° wide-angle scanning and millimeter-level avoidance of furniture, pets, walls, and stair edges. This minimizes collisions and prevents falls.
Figure 8: The K5 Ultra's PSD 190° precise obstacle avoidance ensures high-precision recognition, leading to zero collision and jamming.
Battery Life
The K5 Ultra provides up to 170 minutes of runtime in quiet mode, suitable for cleaning large areas up to 1500 sq. ft. It automatically returns to its charging dock when the battery is low.
Maintenance
Regular maintenance ensures your K5 Ultra operates at peak performance.
1. Emptying the Dust Box
The 500ml dust box should be emptied after each cleaning cycle or as needed. Press the release button to remove the dust box, open it, and discard the collected debris.
2. Replacing Mop Pads
The K5 Ultra uses disposable mop pads attached to a magnetic mop holder. After mopping, detach the used pad and dispose of it. Attach a new disposable mop pad for the next mopping session. No water tank is needed for mopping.
Figure 9: The K5 Ultra features an easy maintenance system with disposable mop pads, ensuring a hygienic cleaning experience.
3. Cleaning Side Brushes
Periodically check the side brushes for tangled hair or debris. Remove any obstructions to ensure effective sweeping.
4. Cleaning the Filter
The HAPE filter inside the dust box should be cleaned regularly. Tap off loose debris or use a small brush to clean it. Replace the filter every 3-6 months depending on usage.
Troubleshooting
If you encounter issues with your K5 Ultra, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not start or respond. | Low battery; Power switch off; Robot stuck. | Ensure robot is fully charged. Check if the main power switch is on. Clear any obstructions. |
| Robot makes 6 beeps repeatedly. | Internal error or sensor issue. | Turn off the robot, wait 30 seconds, then turn it back on. If the issue persists, contact customer support. |
| Poor cleaning performance. | Full dustbin; Clogged filter; Worn brushes. | Empty dustbin. Clean or replace filter. Clean or replace side brushes. |
| Robot gets stuck frequently. | Too many obstacles; Dark surfaces; Rugs/mats too thick. | Clear floor of small objects. Avoid using on very dark carpets or thick rugs that exceed 2 inches in height. |
| Cannot connect to Wi-Fi/App. | Incorrect Wi-Fi band; Weak signal; App issues. | Ensure your router is on 2.4GHz. Move robot closer to router. Restart app and robot. |
Specifications
| Feature | Detail |
|---|---|
| Brand | OKP Life |
| Model Name | K5 Ultra Robot Vacuum Cleaner |
| Special Feature | LiDAR Navigation, Anti-Fall, Pet Hair Pick Up, Auto-Docking |
| Color | Bright White |
| Product Dimensions | 15.3"L x 13"W x 7"H |
| Filter Type | HAPE |
| Battery Life | Up to 170 minutes (in quiet mode) |
| Dust Box Capacity | 500 Milliliters |
| Power Source | Battery Powered |
| Control Method | App, Push Button, Voice |
| Compatible Devices | Smartphones, Amazon Echo, Google Home |
| Item Weight | 6.5 pounds |
Warranty and Support
OKP Life is committed to providing excellent customer service. If you have any questions, concerns, or require assistance with your K5 Ultra robot vacuum, please reach out to our support team.
Customer Support: Available Monday to Friday.
Contact Method: Please use the Amazon message center to contact OKP Life customer support for prompt assistance.
For detailed warranty information, please refer to the included Instruction Guide or contact customer support.
