Jack & Rose HCT2 4-in-1 Professional Hair Clipper & Trimmer Set User Manual

Introduction

Thank you for choosing the Jack & Rose HCT2 4-in-1 Professional Hair Clipper & Trimmer Set. This comprehensive grooming kit is designed for versatility and precision, offering solutions for hair cutting, beard sculpting, smooth shaving, and nose hair trimming. This manual provides essential information for safe and effective use, maintenance, and care of your new grooming tools.

Important Safety Instructions

• Read all instructions before using the appliance.
• Keep the appliance away from water. Do not use while bathing or showering.
• Do not reach for an appliance that has fallen into water. Unplug immediately.
• Unplug this appliance before cleaning.
• Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
• Use this appliance only for its intended household use as described in this manual.
• Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged.
• Keep the cord away from heated surfaces.
• Never drop or insert any object into any opening.
• Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
• Always attach the plug to the appliance first, then to the outlet. To disconnect, turn all controls to OFF, then remove the plug from the outlet.
• The appliance is equipped with a 3-second child lock function to prevent accidental activation.

Setup

Unboxing and Component Identification

Your Jack & Rose HCT2 kit includes a main hair clipper, a T-blade trimmer, a 0mm shaver, a nose hair trimmer, various guide combs, lubricant oil, a cleaning brush, grooming apron, and USB charging cables, all neatly organized in a durable case.

Initial Charging

Before first use, ensure all devices are fully charged. The hair clipper provides up to 240 minutes of use on a single charge, while the hair trimmer and nose hair trimmer offer up to 180 minutes. The shaver provides up to 90 minutes. Use the provided USB cables for charging.

Attaching Guide Combs

Select the appropriate guide comb for your desired hair length. The main clipper comes with 10 guide combs (1/2/3/4/5/6/7/8/9/10mm), and the detail trimmer includes 3 guide combs (3/5/7mm). Snap the chosen comb securely onto the blade head until it clicks into place.

Operating Instructions

Hair Clipping (Main Clipper)

1. Ensure the clipper is charged and a suitable guide comb is attached.
2. Turn on the clipper using the power button. The LED display will show the battery percentage.
3. Start clipping from the nape of the neck, moving upwards against the direction of hair growth.
4. Use smooth, overlapping strokes for an even cut.
5. The main clipper features a 0.8-2mm adjustable blade for precise length control.

Beard Trimming (T-Blade Trimmer)

• Attach the T-blade trimmer head.
• Use the detail trimmer guide combs (3/5/7mm) for desired beard length, or use without a comb for precise edging and detailing.
• Move the trimmer in the direction of hair growth for a uniform trim.

Electric Shaving (0mm Shaver)

• Attach the 0mm shaver head.
• The shaver uses floating technology for a gentle and close shave, suitable for beards and bald heads.
• Move the shaver gently against the direction of hair growth for a smooth finish.

Nose Hair Trimming (Nose Hair Trimmer)

• Attach the nose hair trimmer head.
• The double-sided blade design rotates 360° to trim hair without pulling.
• Gently insert the trimmer tip into the nostril or ear and move it in a circular motion to trim unwanted hair.

Child Lock Function

To prevent accidental activation, the hair clipper features a 3-second child lock function. Press and hold the power button for 3 seconds to activate or deactivate the lock.

Product Overview Video

Maintenance

Cleaning the Blades

• After each use, turn off the appliance and remove any attached guide combs.
• Use the provided cleaning brush to remove loose hairs from the blades and the device body.
• For a thorough clean, the devices are IPX7 waterproof and can be rinsed under running water. Ensure the device is completely dry before storage or next use.

Lubrication

Regularly apply a few drops of the provided lubricant oil to the blades to maintain optimal performance and extend the lifespan of your clippers and trimmers. Apply oil after cleaning and before storage.

Troubleshooting

• Device not turning on: Ensure the device is fully charged. Check if the child lock function is activated (press and hold the power button for 3 seconds to deactivate).
• Poor cutting performance: Clean the blades thoroughly to remove any trapped hair or debris. Apply lubricant oil to the blades. Ensure the correct guide comb is securely attached.
• Excessive noise or vibration: Clean and oil the blades. If the issue persists, contact customer service.
• Battery not charging: Ensure the USB cable is properly connected to both the device and a working power source. Try a different USB port or adapter.

Specifications

Warranty & Support

Warranty Information

The Jack & Rose HCT2 4-in-1 Professional Hair Clipper & Trimmer Set comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product is free from defects in material and workmanship under normal use.

Customer Service

For any questions, concerns, or warranty claims, please contact Jack & Rose customer service. We offer 24-hour customer service to assist you. Please refer to the contact information provided in your product packaging or visit the official Jack & Rose website for support.