ULANZI PK-08 Mini Tripod Instruction Manual for DJI Osmo Pocket 3

Introduction

The ULANZI PK-08 Mini Tripod is a versatile accessory designed to enhance the stability and functionality of your DJI Osmo Pocket 3, Insta360 X5, X4, X3, and other compatible cameras. This manual provides essential information for proper setup, operation, and maintenance of your PK-08 Mini Tripod.

Figure 1: ULANZI PK-08 Mini Tripod attached to a DJI Osmo Pocket 3 camera.

Product Features

• Quick Switch between Tripod & Grip Mode: Automatically opens into a mini tripod when placed down and retracts into a grip when picked up, allowing for effortless mode switching.
• 1/4" Screw and Detachable Arri Locating Pin: Ensures secure attachment to your camera and compatibility with original handles.
• Lightweight and Compact: Weighing approximately 27 grams, it is designed for portability and easy storage.
• Durable Construction: Made of aluminum alloy for sturdiness and durability.
• Protective Design: Features a silicone pad to prevent rubbing and scratching on your device.

Figure 2: Illustration of the quick switch mechanism for tripod and grip modes.

Package Contents

The ULANZI PK-08 Mini Tripod package includes the following items:

• PK-08 Mini Tripod x 1
• Wrench x 2
• Locating Screw x 2
• Packaging Box x 1

Figure 3: All items included in the PK-08 Mini Tripod retail package.

Setup Instructions

1. Attach to Camera: Align the 1/4" mounting screw of the PK-08 Mini Tripod with the corresponding thread on your DJI Osmo Pocket 3 or other compatible camera.
2. Secure Connection: Rotate the tripod clockwise until it is firmly attached. Ensure the connection is secure to prevent accidental detachment.
3. Arri Locating Pin (Optional): If your device supports it, you may use the detachable Arri locating pin for additional stability and anti-rotation. Insert the locating pin into the designated hole on the tripod base and then align it with your camera's accessory port. Remove the Arri locating pin when not in use to prevent scratching.

Figure 4: Detail of the 1/4" screw and detachable Arri locating pin for secure camera attachment.

Operating Instructions

1. Tripod Mode: To use the PK-08 as a mini tripod, simply place your camera (with the attached tripod) on a flat surface. The tripod legs will automatically extend and provide a stable base.
2. Grip Mode: To use the PK-08 as a hand grip, lift your camera. The tripod legs will automatically retract, allowing you to comfortably hold your camera for handheld shooting.
3. Compatibility: The PK-08 is compatible with the original handle of the DJI Osmo Pocket 3, allowing for extended grip length and additional functionality.

Maintenance

• Cleaning: Wipe the tripod with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the tripod in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically check the mounting screw and tripod legs for any signs of wear or damage.

Troubleshooting

• Loose Connection: If the tripod feels loose on your camera, ensure the 1/4" screw is tightened properly. If using the Arri locating pin, verify it is correctly seated.
• Tripod Legs Not Extending/Retracting: Check for any obstructions or debris in the leg mechanism. Ensure the tripod is placed on a flat surface for proper extension.
• Scratches on Device: Always remove the Arri locating pin when not in use to prevent potential scratches.

Specifications

Note: Manually measured weight and size may not be accurate.

Warranty and Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official ULANZI website. Keep your purchase receipt for warranty claims.