MYPIN CE0414

MYPIN Portable Cordless Pressure Washer

Model: CE0414

1. Introduction

Thank you for choosing the MYPIN Portable Cordless Pressure Washer. This device is designed for efficient and convenient cleaning of various surfaces, including cars, floors, walls, and garden furniture. Its cordless design and powerful 600 PSI output make it suitable for a wide range of outdoor cleaning tasks without the need for a power outlet. Please read this manual thoroughly before use to ensure safe and optimal operation.

MYPIN Portable Cordless Pressure Washer with a car in the background

Image: The MYPIN Portable Cordless Pressure Washer, ready for use, with a car in the background.

2. Important Safety Information

WARNING: Read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

  • Always wear appropriate personal protective equipment, such as safety glasses, gloves, and hearing protection.
  • Do not point the spray nozzle at people, pets, or electrical equipment. The high-pressure spray can cause serious injury.
  • Ensure all connections are secure before operating the pressure washer.
  • Do not operate the pressure washer in the rain or wet conditions.
  • Keep children and bystanders away from the operating area.
  • Use only clean water with the pressure washer. Do not use corrosive chemicals or flammable liquids.
  • Disconnect the battery when not in use or when performing maintenance.
  • Store the pressure washer in a dry, secure location, out of reach of children.

3. Package Contents

Verify that all items are present in your package:

  • 1x Cordless High-Pressure Washer Gun
  • 2x 3.0Ah Lithium-Ion Batteries
  • 1x Charging Plug (Charger)
  • 1x 5-meter (196-inch) PVC Hose
  • 1x Water Filter
  • 1x Quick Connector
  • 1x Foam Bottle (100ml)
  • 1x 6-in-1 Multifunction Spray Nozzle
  • 1x Standard Nozzle (0-180° adjustable)
  • 1x User Manual
  • 1x Storage Suitcase
Image showing all components included in the MYPIN Portable Cordless Pressure Washer package

Image: All components of the MYPIN Portable Cordless Pressure Washer kit, including the main unit, batteries, charger, hose, nozzles, and storage case.

4. Product Features

  • Portable Cordless Design: Freedom to clean anywhere without power outlets.
  • High Pressure Output: Up to 600 PSI for effective removal of stubborn dirt and grime.
  • Dual Battery System: Includes two 21V 3.0Ah rechargeable lithium-ion batteries for extended operation (approx. 45 minutes total).
  • Intelligent Charging Protection: Charger indicates red light during charging and green light when fully charged, automatically stopping to prevent overcharging.
  • Versatile Nozzles:
    • 6-in-1 Multifunction Nozzle: Features 0°, 15°, 25°, 40°, straight, and shower modes for various cleaning needs.
    • Standard Nozzle: Adjustable from 0-180° for precise control over spray angle and intensity.
  • Foam Function: Integrated foam pot allows for easy application of detergent for deep cleaning.
  • Water Filtration System: Includes a water filter to prevent debris from entering the pump, ensuring longevity.
  • Multiple Water Sources: Can draw water from buckets, pools, or other static water sources using the included hose and filter.
  • Wide Applications: Ideal for cleaning cars, motorcycles, bicycles, patios, driveways, garden furniture, walls, and watering plants.
Close-up of the 6-in-1 multifunction spray nozzle with various spray patterns indicated
6-in-1 Multifunction Nozzle
Close-up of the standard nozzle showing its rotatable design for adjustable spray
Rotatable Standard Nozzle
Image of the 100ml foam pot for detergent application
Foam Pot
Image showing a battery charger with a red light indicating charging and a green light indicating fully charged
Battery Charging Indicators: Red for charging, Green for fully charged.

5. Setup Instructions

Follow these steps to assemble and prepare your pressure washer for use:

  1. Connect Water Filter: Attach the water filter to one end of the PVC hose. This filter prevents impurities from entering the pump.
  2. Install Quick Connector (Hose End): Secure the quick connector to the other end of the PVC hose.
  3. Install Battery: Insert a charged lithium-ion battery into the battery slot on the pressure washer gun until it clicks into place.
  4. Install Quick Connector (Gun End): Attach the quick connector from the hose to the inlet port on the pressure washer gun.
  5. Install Nozzle: Select your desired nozzle (6-in-1 or standard). Press and twist the nozzle onto the end of the lance until it is firmly secured.
  6. Prepare Water Source: Place the water filter end of the hose into a bucket of water, a pool, or any other suitable static water source.
Step-by-step visual guide for assembling the MYPIN Portable Cordless Pressure Washer

Image: Visual guide for connecting the water filter, hose, battery, and nozzle to the pressure washer.

Setup and Unboxing Video

Video: An unboxing and initial setup demonstration of the MYPIN Portable Cordless Pressure Washer, showing how to connect components and prepare for use.

6. Operating Instructions

  1. Prime the Pump: Before starting, ensure the hose and pump are filled with water. Squeeze the trigger for a few seconds to allow water to flow through and expel any air.
  2. Start Cleaning: Press the power button/trigger to start the pressure washer.
  3. Adjust Nozzle:
    • 6-in-1 Nozzle: Rotate the nozzle head to select the desired spray pattern (0° for concentrated stream, 40° for wide fan, shower for gentle rinse, etc.).
    • Standard Nozzle: Rotate the orange tip to adjust the spray angle from a narrow stream to a wider fan. A smaller angle results in stronger water force.
  4. Use Foam Pot (Optional): If using detergent, fill the foam pot with appropriate cleaning solution. Attach it to the pressure washer gun. The foam function will mix the detergent with water for a rich foam spray.
  5. Cleaning Technique: Hold the pressure washer firmly and maintain a safe distance from the surface being cleaned. Move the spray in a consistent motion to ensure even cleaning.
  6. Stop Operation: Release the trigger to stop the water flow. For extended breaks, disconnect the battery.
Collage of images showing the pressure washer being used for various applications like cleaning a floor, furniture, garden, and wall

Image: Examples of wide applications for the pressure washer, including cleaning floors, furniture, gardens, and walls.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your pressure washer.

  • Clean Water Filter: Regularly inspect and clean the water filter to remove any accumulated debris. A clogged filter can reduce water flow and pressure.
  • Rinse After Use: After using detergent or cleaning solutions, run clean water through the pressure washer for a few minutes to flush out any residue.
  • Nozzle Cleaning: If nozzles become clogged, use a small pin or needle to clear the opening.
  • Battery Care: Store batteries in a cool, dry place. Do not expose them to extreme temperatures. Charge batteries fully before long-term storage.
  • Winter Storage: If storing in freezing temperatures, ensure all water is drained from the pump, hose, and nozzles to prevent damage from freezing.
  • General Cleaning: Wipe down the exterior of the pressure washer with a damp cloth. Do not use harsh chemicals.

8. Troubleshooting

ProblemPossible CauseSolution
No water flow or low pressure
  • Water filter clogged
  • Hose kinked or blocked
  • Air in the system
  • Low battery charge
  • Nozzle clogged
  • Clean the water filter
  • Straighten the hose; check for blockages
  • Prime the pump by squeezing the trigger until water flows steadily
  • Charge the battery
  • Clear the nozzle opening
Pressure washer does not start
  • Battery not installed correctly
  • Battery discharged
  • Power button not pressed
  • Ensure battery is fully seated
  • Charge the battery
  • Press the power button firmly
Water leaks from connections
  • Loose connections
  • Missing or damaged O-rings
  • Tighten all connections
  • Inspect and replace O-rings if necessary

9. Specifications

  • Brand: MYPIN
  • Model Number: CE0414
  • Power Source: Battery Powered
  • Battery Type: 21V Lithium-Ion (3.0Ah)
  • Maximum Pressure: 600 PSI
  • Maximum Water Flow Rate: Up to 6 L/Min
  • Hose Length: 5 Meters (196 inches)
  • Item Weight: 2.6 Kilograms
  • Product Dimensions (L x W x H): 18.1" x 10.2" x 2.95"
  • Color: Black

10. Warranty and Support

This MYPIN Portable Cordless Pressure Washer comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including the warranty period and coverage details. For technical support, replacement parts, or warranty claims, please contact the seller or manufacturer directly through your purchase platform.

Keep your purchase invoice or receipt as proof of purchase for warranty service.

© 2026 MYPIN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.