1. Introduction
Thank you for choosing the OKP L6 Aqua Robot Vacuum Cleaner and Mop. This advanced 3-in-1 device is designed to provide efficient and thorough cleaning for your home, combining sweeping, vacuuming, and mopping functionalities. This manual provides essential information for setting up, operating, and maintaining your robot to ensure optimal performance and longevity.
2. Safety Instructions
Please read all safety instructions carefully before using this product and retain them for future reference. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children should be supervised to ensure that they do not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- Only use the original power adapter provided by the manufacturer.
- Do not use the robot in wet environments or near water.
- Ensure the robot is turned off and unplugged before performing any maintenance.
- Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
- Do not operate the robot in a room where an infant or child is sleeping.
3. Package Contents
Verify that all components are present and in good condition upon unpacking:
- OKP L6 Aqua Robot Vacuum Cleaner and Mop
- Charging Dock
- Power Adapter
- Side Brushes (2 pairs)
- Cleaning Tool
- Dustbin (pre-installed)
- Water Tank (pre-installed)
- User Manual
4. Product Overview
The OKP L6 Aqua is equipped with advanced features for comprehensive home cleaning. Key components include a LiDAR DToF navigation system for precise mapping, a powerful 6000Pa suction motor, and an integrated 3-in-1 sweep, vacuum, and mop function. It also features an anti-tangle system with a brushless motor and PSD obstacle avoidance technology.
Figure 4.1: Top View of OKP L6 Aqua Robot
This image displays the top surface of the OKP L6 Aqua robot. Visible elements include the central power button with an indicator light, the circular LiDAR navigation sensor housing, and the access panel for the dustbin and water tank. The robot features a clean white finish with a textured pattern around the edges.
5. Setup
5.1 Charging Dock Placement
Place the charging dock against a wall in an open area, ensuring there are no obstacles within 1 meter (3 feet) to the front and 0.5 meters (1.5 feet) to the sides. Connect the power adapter to the charging dock and plug it into a wall outlet.
5.2 Initial Charging
Place the robot onto the charging dock. Ensure the charging contacts on the robot align with those on the dock. The robot will begin charging automatically. For first-time use, fully charge the robot before operation. The indicator light on the robot will show charging status.
5.3 App Download and Connection
- Download the 'OKP' app from your mobile device's app store (available for iOS and Android).
- Register an account and log in.
- Follow the in-app instructions to add your OKP L6 Aqua robot. Ensure your mobile device is connected to a 2.4GHz or 5GHz Wi-Fi network during the setup process.
5.4 Mapping Process
After successful app connection, initiate a full cleaning cycle from the app. The robot will use its LiDAR DToF technology to scan your rooms and create a precise map of your home. This map is crucial for optimizing cleaning paths and enabling advanced features like No-Go Zones and room-specific cleaning.
6. Operating Instructions
6.1 Starting and Stopping Cleaning
- Start: Press the power button on the robot or use the 'Start Cleaning' option in the OKP app.
- Pause: Press the power button during cleaning or use the 'Pause' option in the app.
- Stop/Return to Dock: Press and hold the power button for a few seconds or use the 'Return to Dock' option in the app.
6.2 Cleaning Modes
The robot offers four distinct cleaning modes, selectable via the OKP app:
- Zigzag Mode: Standard cleaning pattern for general coverage.
- Relaxed Mode: A less aggressive cleaning mode, suitable for lighter dirt.
- Spot Mode: Concentrated cleaning in a specific area for localized spills or dirt.
- Edges Mode: Cleans along walls and furniture edges.
6.3 App Control Features
The OKP app provides comprehensive control over your robot:
- Room Selection: Select specific rooms for cleaning based on the generated map.
- No-Go Zones: Define areas the robot should avoid (e.g., pet bowls, delicate items).
- Multi-Floor Mapping: Supports up to 3 maps for multi-level homes, allowing customized cleaning schedules for each floor.
- Scheduling: Set daily or weekly cleaning schedules.
- Real-time Monitoring: View the robot's cleaning progress and current location on the map.
6.4 Voice Control
The OKP L6 Aqua is compatible with Alexa and Google Assistant. Link your robot to your preferred voice assistant through the respective app to control cleaning with simple voice commands.
6.5 Automatic Recharging
When the battery level is low, the robot will automatically return to its charging dock. After recharging, it will resume cleaning from where it left off (if the cleaning cycle was not completed).
7. Maintenance
Regular maintenance ensures your OKP L6 Aqua operates efficiently and extends its lifespan.
7.1 Emptying the Dustbin
The robot is equipped with a 450ml dustbin. It is recommended to empty the dustbin after each cleaning cycle, especially if you have pets or high traffic areas. Open the top cover, remove the dustbin, and dispose of the collected debris.
7.2 Refilling/Emptying the Water Tank
The water tank has a 200ml capacity. For mopping, fill the tank with clean water. After mopping, it is crucial to empty any remaining water from the tank to prevent water pooling at the charging station and to maintain hygiene. Remove the water tank, empty it, and allow it to air dry.
7.3 Cleaning Brushes
The robot features a brushless motor and dual side brushes. Regularly check the side brushes for tangled hair or debris and clean them using the provided cleaning tool. The brushless design helps reduce hair entanglement compared to traditional brush motors.
7.4 Cleaning Sensors
Wipe the anti-drop sensors, obstacle avoidance sensors (PSD), and charging contacts with a clean, dry cloth periodically to ensure proper functionality.
7.5 Battery Care
The robot uses a Lithium-ion battery. To prolong battery life, ensure the robot is regularly charged. If storing the robot for an extended period, charge it fully and turn it off, then recharge every three months.
8. Troubleshooting
If you encounter issues with your OKP L6 Aqua, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not start or respond. | Low battery; Power switch off; Robot stuck. | Charge the robot; Ensure power switch is ON; Clear any obstructions. |
| Robot cannot return to charging dock. | Charging dock obstructed; Robot too far from dock. | Ensure clear path to dock; Manually place robot near dock. |
| Poor cleaning performance. | Dustbin full; Brushes tangled; Filter clogged. | Empty dustbin; Clean brushes; Clean or replace filter. |
| Water pooling at charging station after mopping. | Water tank not emptied after use. | Always empty the water tank immediately after each mopping cycle. |
| Robot gets stuck frequently. | Obstacles; Uneven surfaces; No-Go Zones not set. | Clear small obstacles; Use No-Go Zones in the app for problematic areas. |
For further assistance, consult the OKP app for specific error messages or refer to the manufacturer's support resources.
9. Specifications
| Feature | Specification |
|---|---|
| Brand | OKP |
| Model Number | L6 Aqua |
| Color | White |
| Dimensions (L x W x H) | 28 x 28 x 9.5 cm |
| Weight | 3.35 Kilograms |
| Dustbin Capacity | 450 Milliliters |
| Water Tank Capacity | 200 Milliliters |
| Suction Power | Up to 6000 Pa |
| Voltage | 19.06 Volts (AC) |
| Noise Level | 52 dB |
| Special Features | Precision laser mapping, LiDAR navigation, PSD obstacle avoidance |
| Battery Type | Lithium-ion (included) |
| Control Type | App control, Voice control (Alexa, Google Assistant) |
| Surface Recommendation | Hard floors |
10. Warranty and Support
Warranty information for the OKP L6 Aqua Robot Vacuum Cleaner and Mop is typically provided with the product packaging or can be found on the official OKP website. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting not covered in this manual, or spare parts inquiries, please contact OKP customer service through their official website or the support section within the OKP app.
