Osight S and Osight X Reflex Sights User Manual

1. Introduction

This manual provides detailed instructions for the Osight S Micro Enclosed Sight and the Osight X Multi-Reticle Open Reflex Sight. These optics are designed to enhance aiming precision and target acquisition for various firearm applications. Please read this manual thoroughly before installation and operation to ensure proper use and safety.

Figure 1: Osight S (Olive Green) and Osight X (Black) Reflex Sights with charging covers.

2. Osight S Micro Enclosed Sight

2.1 Key Features

• Universal RMSc Footprint: Designed for optics-ready slides, ensuring broad compatibility.
• 2 MOA Dot & 32 MOA Circle Reticle: Easily switch between dot-and-circle, dot-only, or circle-only reticles.
• Enclosed Optic with Aspherical Lens: Delivers zero distortion, parallax-free clarity, and a relatively large window.
• IPX7 Waterproof Reliability: Ensures performance in various environmental conditions.

Figure 2: Osight S Micro Enclosed Sight with charging cover.

2.2 Setup and Mounting

The Osight S is designed for universal RMSc footprint compatibility. Use the included screws for secure integration with your optics-ready slide. Ensure the mounting surface is clean and free of debris before installation. An optional Picatinny mount adapter may be required for certain setups.

Figure 3: Osight S mounted on a firearm.

2.3 Operation

The Osight S features a multi-reticle system. You can easily switch between a 2 MOA dot-and-circle, dot-only, or circle-only reticle to suit different shooting scenarios. Refer to the device's controls for reticle selection and brightness adjustment.

Figure 4: Osight S in use, demonstrating its low profile.

3. Osight X Open Reflex Sight

3.1 Key Features

• Industry-Standard Mounting Footprint: Adopts the Ruggedized Miniature Reflex (RMR, 407c/507c) footprint for versatility.
• 3 MOA Dot & 32 MOA Circle Reticle: Offers switchable dot-and-circle, dot-only, or circle-only reticles.
• Large Window Size: Designed for rapid target acquisition.

Figure 5: Osight X Open Reflex Sight with charging cover.

3.2 Setup and Mounting

The Osight X utilizes the industry-standard RMR (407c/507c) mounting footprint. Use the provided screws for secure attachment to compatible optic cuts. Ensure proper alignment and torque specifications are followed during installation. An optional Picatinny mount adapter may be required for certain setups.

Figure 6: Osight X Universal Mounting Diagram.

3.3 Operation

The Osight X features a multi-reticle system, allowing you to switch between a 3 MOA dot-and-circle, dot-only, or circle-only reticle. This flexibility enables tailoring your aiming solution to various shooting scenarios for precision and rapid target acquisition.

Figure 7: Osight X Multi-Reticle System.

4. General Maintenance

To ensure the longevity and optimal performance of your Osight S and Osight X sights, follow these maintenance guidelines:

• Cleaning: Use a soft, lint-free cloth to clean the lenses. For stubborn smudges, a small amount of lens cleaning solution can be applied to the cloth, not directly to the lens.
• Housing: Wipe the sight's housing with a damp cloth to remove dirt and debris. Avoid harsh chemicals.
• Battery: Replace batteries as needed. Ensure battery caps are securely tightened to maintain water resistance.
• Storage: Store the sights in a dry, cool environment when not in use.
• Water Resistance: The Osight S is IPX7 waterproof. While the Osight X is robust, avoid prolonged submersion unless explicitly stated for that model. Always ensure battery caps are sealed.

5. Troubleshooting

If you encounter issues with your Osight S or Osight X sights, consider the following common solutions:

• Reticle Not Visible: Check the battery. Ensure it is correctly installed and has sufficient charge. Adjust brightness settings.
• Reticle Flickering: This may indicate a low battery. Replace the battery.
• Inaccurate Aim: Ensure the sight is securely mounted and properly zeroed. Re-zero the sight if necessary.
• Fogging: If fogging occurs internally, contact customer support. External fogging can be wiped away.

For persistent issues not resolved by these steps, please contact Osight customer support.

6. Specifications

7. Warranty and Support

Osight products are backed by a Lifetime Warranty, reflecting the brand's commitment to quality and customer satisfaction. For warranty claims, technical assistance, or any product-related inquiries, please visit the official Osight store or contact customer support directly.

Osight Store: Visit the Osight Store on Amazon