HOBOT S7 Pro Window Cleaning Robot User Manual

1. Introduction

The HOBOT S7 Pro is an advanced robotic window cleaner designed to automate the cleaning of various glass surfaces. It features a dual mop polishing system, ultrasonic water spray, and intelligent navigation to provide efficient and streak-free cleaning. This manual provides essential information for the safe and effective use of your HOBOT S7 Pro.

Image: The HOBOT S7 Pro robot, its remote control, and the accompanying smartphone application interface.

2. Safety Information

Adhere to the following safety guidelines to prevent injury or damage to the device:

• Ensure the device is used on sunny days and avoid operation during rain or high humidity to prevent damage and ensure optimal performance.
• Always clean the intended placement area on the window before attaching the robot to ensure proper suction and prevent slippage.
• The robot is equipped with an anti-fall algorithm and an Uninterruptible Power System (UPS) providing 20 minutes of backup power in case of a power outage. An audio alert will sound if power is lost.
• Always attach the provided safety rope to a secure anchor point when operating the robot, especially on high-rise windows. The safety rope can withstand up to 230 kgf of pulling force.
• Ensure the secure DC power jack is firmly connected during operation. The robot requires continuous power from the cord.
• The device features edge leakage bumper sensors and silicone-covered bumpers to prevent scratches and ensure gentle contact with window frames.

Image: Illustration of the HOBOT S7 Pro's safety features, including its long power cord, secured power connector, safety rope, and embedded UPS system for uninterrupted operation.

3. What's in the Box

The HOBOT S7 Pro package includes:

• HOBOT S7 Pro Window Cleaning Robot
• Remote Control
• Power Adapter and Cord
• Safety Rope
• Cleaning Cloths (washable microfiber)
• User Manual (this document)

4. Setup

4.1 Initial Preparation

1. Ensure the window surface is free from large debris or loose particles.
2. Confirm the weather conditions are suitable for operation (sunny, no rain or high humidity).

4.2 Power Connection

Connect the power adapter to the robot and then plug it into a power outlet. Ensure the connection is secure. The robot operates on corded electric power.

4.3 App Installation and Remote Control Pairing

The HOBOT S7 Pro can be controlled via the included remote control or a smartphone app. Download the HOBOT LEGEE app from your device's app store. Follow the in-app instructions to pair your robot. The remote control is pre-paired.

4.4 Water Tank Filling

Locate the water tank on the robot. Fill it with distilled water or HOBOT's recommended cleaning solution. The dual ultrasonic sprayers atomize water into 15-nanometer mist particles for effective cleaning.

Image: Detailed view of the HOBOT S7 Pro's dual ultrasonic water spray system, which produces a fine mist for cleaning.

5. Operating Instructions

5.1 Starting a Cleaning Cycle

Before starting, ensure the robot is placed on the window. You can initiate cleaning using the remote control or the HOBOT LEGEE app.

5.2 Spray Function Control

The spray function can be toggled on or off using the remote control or the HOBOT LEGEE app. On the remote, press the spray icon button. On the app, navigate to the remote control interface and tap the spray icon.

5.3 Adjusting Water Spray Amount

If the humidity is too high or low, you can adjust the water spray amount via the HOBOT LEGEE app. In the app, press any auto cleaning button to open the control panel, then adjust the spray amount setting.

5.4 Automatic Cleaning Modes

The HOBOT S7 Pro features three automatic cleaning modes for full window coverage. Press the auto-clean button on the remote or select a mode in the app to start. The robot will automatically stop upon completion.

• Horizontal Placement: For horizontally oriented windows, the robot performs a zigzag pattern, then an N-way auto-clean.
• Vertical Placement: For vertically oriented windows, the robot performs an N-way auto-clean pattern.

5.5 Continuing Cleaning from Interrupted Place

If the cleaning cycle is interrupted (e.g., due to power loss or manual stop), you can press the play button on the remote or app to continue cleaning from the last position.

Image: A diagram illustrating the reciprocating dual mop action, which contributes to faster and smoother movement by reducing friction.

Image: Visual representation of the HOBOT S7 Pro's versatility, showing its ability to clean frameless windows, glass of any thickness, various surfaces, solar panels (at angles greater than 25 degrees), and large glass areas using an 8-meter extension cord.

6. Maintenance

6.1 Cleaning Cloths

The HOBOT S7 Pro uses washable microfiber cleaning cloths. After each use, remove the cloths and wash them according to the care instructions to maintain optimal cleaning performance.

6.2 Water Tank

The water tank is replaceable. Regularly check the water tank for any residue and clean as needed. Ensure the tank is properly seated before operation.

7. Troubleshooting

If you encounter issues with your HOBOT S7 Pro, consider the following:

• Robot not adhering: Ensure the window surface is clean and dry. Check for sufficient suction power.
• Streaks or residue: Ensure cleaning cloths are clean. Adjust the water spray amount in the app if humidity is a factor. For heavily soiled windows, a pre-wipe may be necessary.
• Robot not moving: Check power connection and ensure the safety rope is not impeding movement.
• Error alerts: Refer to the app for specific error codes or voice prompts for guidance.

For persistent issues, contact HOBOT customer support.

8. Specifications

9. Warranty & Support

The HOBOT S7 Pro comes with a 12-Month Manufacturer Warranty covering defects in materials and workmanship. For warranty claims or technical support, please contact HOBOT Technology directly. Refer to the official HOBOT website or your purchase documentation for contact details.