Uonlytech Split Design Solar Wall Lamp with Motion Sensor

Introduction

Thank you for choosing the Uonlytech Split Design Solar Wall Lamp. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new solar light. Designed for outdoor use, this lamp features 100 high-brightness LEDs, an intelligent motion sensor, and an IP65 waterproof rating, making it suitable for various outdoor environments such as gardens, patios, and pathways.

Please read this manual thoroughly before installation and keep it for future reference.

Safety Information

• Ensure the solar panel is installed in a location that receives direct sunlight for at least 6-8 hours daily to ensure optimal charging.
• Do not disassemble or modify the product. Unauthorized modifications may cause damage and void the warranty.
• Keep the product away from fire or high temperatures.
• This product is designed for outdoor use and is IP65 waterproof. However, avoid submerging it in water.
• Handle with care during installation to prevent damage to the solar panel or LED unit.

Package Contents

Verify that all components are present in the package:

• 1 x Uonlytech Split Design Solar Wall Lamp (LED unit with motion sensor and separate solar panel)
• Mounting Screws and Wall Plugs
• Instruction Manual (this document)

Product Features

• Split Design: Allows flexible placement of the solar panel for maximum sun exposure and the LED light unit for optimal illumination.
• 100 High-Brightness LEDs: Provides powerful and efficient lighting with low color decay.
• Intelligent Motion Sensor: Automatically detects human movement to activate brighter illumination.
• IP65 Waterproof Rating: Ensures durability and reliable performance in various weather conditions, including rain, wind, and snow.
• Photocell Sensor: Automatically switches the light to dim mode from dusk to dawn.
• Long Illumination Time: Provides full lighting for approximately 8 hours after a full charge.

Image: Key features of the Uonlytech Solar Wall Lamp, highlighting 8-hour lighting, motion sensing, and easy installation.

Setup and Installation

Follow these steps for proper installation:

1. Choose a Location:
   • Select a mounting location for the solar panel where it will receive direct sunlight for at least 6-8 hours daily, unobstructed by trees, buildings, or shadows.
   • Choose a location for the LED light unit that provides the desired illumination coverage and is within range of the motion sensor. Ensure the cable connecting the solar panel and LED unit can reach both locations.
2. Mark Drilling Points:
   • Hold the mounting bracket of the solar panel and the LED unit against the desired surfaces.
   • Mark the positions for drilling holes using a pencil.
3. Drill Holes:
   • Drill holes at the marked positions. Insert wall plugs into the drilled holes if installing on masonry or concrete.
4. Mount the Units:
   • Securely attach the solar panel and LED light unit to the wall or desired surface using the provided screws.
   • Adjust the angle of the solar panel to maximize sun exposure.
5. Connect the Cable:
   • Connect the cable from the solar panel to the LED light unit. Ensure a secure connection.
6. Initial Charge:
   • Allow the solar lamp to charge for at least 6-8 hours in direct sunlight before its first use to ensure the battery is fully charged.

Image: Example of the Uonlytech Solar Induction Wall Light installed on an exterior wall, demonstrating the split design.

Operating Instructions

The Uonlytech Solar Wall Lamp operates automatically based on ambient light and motion detection.

• Automatic Dusk-to-Dawn Operation: The integrated photocell sensor will automatically turn the light on in a dim mode when dusk falls.
• Motion Detection: When the intelligent human body sensing function detects motion within its range, the light will automatically increase to full brightness.
• Return to Dim Mode: After approximately 15-30 seconds of no motion detection, the light will revert to its dim mode to conserve energy.
• Daytime Charging: During daylight hours, the solar panel will charge the internal battery, and the light will remain off.

Image: The solar wall lamp providing bright illumination at a garage entrance upon motion detection.

Maintenance

To ensure optimal performance and longevity of your solar wall lamp, follow these maintenance tips:

• Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, leaves, or snow. A clean panel ensures efficient charging.
• Check Connections: Periodically inspect the cable connection between the solar panel and the LED unit to ensure it remains secure and free from damage.
• Clear Obstructions: Ensure that no new obstructions (e.g., growing branches) are blocking direct sunlight from reaching the solar panel.
• Battery Care: The internal battery is designed for long-term use. If the light's performance significantly degrades over time, it may indicate the battery is reaching the end of its lifespan. Battery replacement is not user-serviceable.

Troubleshooting

Specifications

Image: Dimensional view of the Uonlytech Solar Wall Lamp, showing its length and width.

Warranty and Support

Specific warranty information for this product is not provided in the available data. For warranty details, technical support, or any inquiries regarding your Uonlytech Solar Wall Lamp, please refer to the seller's information on the purchase platform or contact Uonlytech customer service directly through their official channels.

You can often find seller contact information on your order details page or by visiting the Uonlytech Store on Amazon.