Introduction
This manual provides comprehensive instructions for the safe and efficient use of your Wireless Bluetooth 5.3 Headset. Please read this manual thoroughly before using the product to ensure optimal performance and longevity. This headset offers advanced connectivity, superior sound quality, and a comfortable design for an immersive listening experience.
Product Overview
Your Wireless Bluetooth 5.3 Headset consists of two earbuds and a charging case. The earbuds are designed for in-ear comfort and feature touch controls for easy operation.
Setup
Charging the Headset
Before first use, fully charge the headset and its charging case. The charging case has a capacity of 300mAh, and each earbud has a 30mAh battery. A full charge provides up to 20 hours of continuous playback, with the case providing multiple recharges for the earbuds.
- Connect the provided USB-to-Lightning cable to the charging port on the case.
- Plug the USB end into a compatible power source (e.g., computer USB port, wall adapter with DC 5V output).
- The indicator light on the case will show charging status. Once fully charged, the light will change or turn off.
- For quick use, 10 minutes of charging can provide approximately 60 minutes of playback.
Pairing with a Device
The headset uses Bluetooth 5.3 for a stable and fast connection.
- Ensure the earbuds are in the charging case and the case is charged.
- Open the charging case. The earbuds will automatically enter pairing mode.
- On your device (smartphone, tablet, etc.), go to Bluetooth settings and turn Bluetooth on.
- Search for available devices. The headset will appear as "FNBT-10" or a similar name.
- Select the headset from the list to connect. Once connected, a confirmation sound or message may be heard.
- You can rename the headset on your device's Bluetooth settings for easier identification.
Operating Instructions
Touch Controls
The earbuds feature intuitive touch controls. Specific functions may vary slightly by model or firmware version, but common controls include:
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Answer/End Call: Single tap on either earbud during an incoming call or active call.
- Reject Call: Press and hold on either earbud during an incoming call.
- Activate Voice Assistant: Triple tap on either earbud (e.g., Siri, Google Assistant).
- Noise Cancellation: The headset features noise cancellation for clearer audio in noisy environments. This feature is typically active by default or can be toggled via specific touch gestures (refer to product-specific documentation if available).
Making and Receiving Calls
The built-in microphone ensures clear, noise-free calls. Use the touch controls as described above to manage your calls.
Maintenance
Proper maintenance will extend the life of your headset.
- Cleaning: Use a soft, dry, lint-free cloth to clean the earbuds and charging case. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the earbuds in their charging case to protect them and keep them charged. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Water Resistance: The headset offers water resistance, making it suitable for gym use or light rain. However, it is not designed for submersion. Avoid exposing it to excessive moisture or liquids.
- Charging: Charge the headset regularly, even if not used frequently, to maintain battery health.
Troubleshooting
If you encounter issues with your headset, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Headset won't turn on/charge. | Low battery; improper connection. | Ensure the charging case and earbuds are fully charged. Check the charging cable and power source. |
| Cannot pair with device. | Bluetooth off; headset not in pairing mode; device too far. | Ensure Bluetooth is enabled on your device. Place earbuds in case, close, then open to re-enter pairing mode. Keep device within 10 meters (32.8 feet) of the headset. |
| No sound or poor sound quality. | Volume too low; improper fit; interference. | Adjust volume on your device. Ensure earbuds are properly seated in your ears. Move away from sources of strong electromagnetic interference. |
| Touch controls not responding. | Temporary software glitch; dirty sensor. | Place earbuds back in the case, close, then reopen. Clean the touch sensor area with a soft, dry cloth. |
Specifications
| Model Name | FNBT-10 (001) |
| Brand | Genérico |
| Connectivity Technology | Wireless (Bluetooth 5.3) |
| Headphone Form Factor | In Ear |
| Materials | Plastic |
| Charging Case Capacity | 300mAh |
| Earbud Battery Capacity | 30mAh (each) |
| Battery Life (Continuous Playback) | Up to 20 hours (with charging case) |
| Charging Connection | USB to Lightning |
| Power Input | DC 5V |
| Bluetooth Frequency | 2.40 - 2.48GHz |
| Bluetooth Distance | Up to 10 meters (32.8 feet) |
| Shipping Dimensions | 10.3 x 10.2 x 4.2 cm |
| Weight | 190 grams |
| Included Components | Charging case, Earbuds (right and left), USB-to-Lightning cable, User Manual |
Warranty and Support
For warranty information and customer support, please refer to the documentation provided at the time of purchase or contact the retailer where you purchased the product. This product complies with relevant quality and safety standards, including ANATEL approval where applicable.
