Introduction
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Patiowell 8x10 ft Outdoor Resin Storage Shed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Safety Information
- Always inspect the product and all components upon receipt.
- Follow the assembly instructions carefully.
- Wear appropriate safety gear, including work gloves, eye protection, and long sleeves, when handling components or performing maintenance.
- Keep children and pets away from the assembly area.
- Do not attempt assembly on days with strong winds or low temperatures.
- Do not exceed the weight capacity of the shed.
- Regularly inspect the shed for any signs of damage or wear and tear.
Required Tools
The following tools are required for assembly:
- Drill
- Ladder
- Screwdriver
- Hex Key (Allen Wrench)
- Wrench
- Work Gloves
- Safety Glasses
It is recommended to use a clean work surface to spread out parts and for pre-assembly steps. Review all instructions before you begin.
Parts List
Before starting assembly, remove all pieces from the packages and spread them out on the ground. Check the type and quantity of parts against the provided parts drawing. Please prepare these components in advance at the beginning of each stage.
(Refer to the detailed parts drawing in the assembly video for specific component identification and quantities.)
Assembly Instructions
1. Site Preparation
Ensure the ground surface is level. It is recommended to construct a wooden or concrete base as a foundation. Measure the ground with a tool to confirm it is level before installation.
Video: Patiowell 10x10 FT Large Storage Shed Installation Video - This video demonstrates site preparation and assembly steps.
2. Base Installation
Assemble the base panels (A1, A2, A3, 10-A6, 10-A7, A4, A5) by interlocking them and securing with screws (SPF6-20, SF4-15). Ensure all connections are firm and the base is stable.
Image: The fully assembled Patiowell 8x10 ft Outdoor Resin Storage Shed.
3. Wall Installation
Install the wall panels (10-B1, 10-B2, 10-B3, 10-B5, 10-B7, 10-B8, 10-B9, B4, B6) in the specified order, ensuring the arrow direction is noted for proper alignment. Secure panels with screws (SP6-15) and connect vertical supports (B2-1, B2-2, B2-3, B2-4, 10-B2-5, 10-B2-6) using M6/M6-10 screws.
Image: The Patiowell 8x10 ft Outdoor Resin Storage Shed with its double doors open, revealing the spacious interior.
4. Vent Installation
Install the vent components (E3, CRI, CLI) onto the triangular panels. Ensure proper fit and secure with screws (SP6-15).
5. Roof Beam/Wall Frame Installation
Assemble the roof beams (10-D2-3, D2-4, 10-D2-8) and wall frames (E1-1, E2-1) using M6/M6-15 and M6/M6-55 screws. Ensure E1-1 and E2-1 are snapped into their corresponding positions before installing screws.
6. Roof Panel Installation
Place the assembled triangular panels (10-CL, 10-CR, 10-CL-1, 10-CR-1) onto the corresponding positions of the wall panels. Install the remaining two triangular panels in turn. After placing the D1 and D3 panels, align them with the grooves of the triangular panels and push them forward. Secure with screws (SP6-20, SP6-35). Ensure D4 fits perfectly on the tripod.
Image: A side view of the Patiowell 8x10 ft Outdoor Resin Storage Shed, highlighting its robust construction.
7. Door Installation
Install the door components (DL-1, DL-2, DR-1, DR-2, DZ, DG) and secure them. Push DZ completely down, ensuring the bottom surface is level. Two people are needed for door installation: one person closes the door and inserts the pin, while the other adjusts the gap outside the door. After making sure the gap is even, the person inside installs DDZ screws (SP6-20).
Image: The Patiowell 8x10 ft Outdoor Resin Storage Shed with its double doors closed and secured.
Product Features
- Durable Materials: Constructed from recyclable high-density resin, offering enhanced stability and impact resistance.
- Simplified Assembly: Features a design with fewer screws and interlocking panels for quicker installation.
- All-Weather Protection: Sloped roof design and plastic floor base prevent water pooling and resist moisture. UV-resistant resin walls protect contents from weather elements.
- Spacious Interior: Dimensions of 66.1 inches deep x 91.3 inches wide x 94.5 inches high provide ample storage for various outdoor items.
- Ventilation and Lighting: Equipped with vents and side windows to ensure air circulation and natural light.
- Security: Features lockable doors to safeguard stored items.
Specifications
| Attribute | Value |
|---|---|
| Brand | Patiowell |
| Product Dimensions | 116.8"D x 91.3"W x 94.5"H |
| Material | Plastic, Resin, Metal (Frame) |
| Color | Gray |
| Item Weight | 440 Pounds |
| Weight Limit | 1500 Pounds |
| Water Resistance Level | Waterproof |
| Assembly Required | Yes |
Warranty and Support
If you encounter any quality problems or require assistance with your Patiowell storage shed, please contact us directly. Our customer service team is available to help you.
Contact: saleservice@madepot.com
Do not return your unit to the store without contacting us first.
