intelamp FR005-18GP20 Solar Outdoor Motion Sensor Light User Manual

1. Product Overview

The intelamp FR005-18GP20 is a high-efficiency solar-powered outdoor light designed for various outdoor applications. It features a powerful 20000mAh battery, 4000 lumens of brightness, dual motion sensors, and remote control functionality. Its IP65 waterproof rating ensures durability in outdoor conditions.

2. Setup and Installation

This section provides detailed instructions for installing your intelamp solar light. Ensure all components are present before beginning installation.

2.1 Unboxing and Component Check

Verify that the package contains the solar light fixture, solar panel, 5-meter connection cable, remote control, and all necessary mounting hardware (screws, anchors, brackets).

2.2 Installation Video Guide

2.3 Step-by-Step Installation

1. Assemble Solar Panel Bracket: Attach the mounting bracket to the back of the solar panel using the provided screws and nuts. Ensure it is securely fastened.



2. Choose Mounting Location: Select a location for the solar panel that receives direct sunlight for at least 5-6 hours daily. The light fixture can be installed in a desired area, up to 5 meters away from the solar panel, thanks to the extended cable.
3. Mark and Drill Holes: Use the mounting bracket as a template to mark the drilling points on the wall or pole. Drill holes of appropriate size and insert the wall anchors.
4. Mount Solar Panel: Secure the solar panel bracket to the wall/pole using the provided screws. Adjust the angle of the solar panel to maximize sun exposure.
5. Mount Light Fixture: Attach the light fixture's bracket to your chosen surface (wall or pole) following the same marking and drilling procedure. Secure the light fixture to its bracket.



6. Connect Solar Panel to Light: Connect the 5-meter cable from the solar panel to the input port on the light fixture. Ensure the connection is secure and waterproof.

3. Operating Instructions

Your intelamp solar light is operated using the included remote control. Familiarize yourself with the remote's functions to customize your lighting experience.

3.1 Remote Control Functions

• ON/OFF: Powers the light on or off.
• Sensor Mode (30s / 3m / 10m): Sets the duration the light stays at full brightness after detecting motion. Choose 30 seconds for high-traffic areas, or 3 or 10 minutes for private spaces.
• Sensor Mode Dim/Off: In sensor mode, after the set duration, the light can either dim to a lower brightness (Dim) or turn completely off (Off) until new motion is detected.
• Lighting Mode (2H / +1H / 6H): Activates continuous lighting for a set duration (2 to 12 hours). Use '+1H' to increase the duration.
• Lighting Mode Dim/Off: In continuous lighting mode, after the set duration, the light can either dim or turn off.
• Brightness Levels (60% / 80% / 100%): Adjusts the maximum brightness of the light.

3.2 Operating Modes Explained

• Motion Detection Mode: The light remains off or at a low dim level and brightens to full intensity (up to 4000 lumens) when motion is detected. It stays bright for the selected duration (30s, 3m, or 10m) before returning to dim or off.



• Continuous Lighting Mode: The light turns on automatically at dusk and stays on for a programmed duration (2 to 12 hours) at a selected brightness level (60%, 80%, or 100%).
• Linked Lighting Feature: If multiple intelamp lights are installed within a 30-meter radius, they can be linked. When one light detects motion and activates, it sends a signal to nearby linked lights, causing them to activate simultaneously. This creates a wider, synchronized illumination area.

3.3 Product Overview Video

4. Maintenance

Regular maintenance ensures optimal performance and longevity of your solar light.

• Clean Solar Panel: Periodically wipe the solar panel surface with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures maximum sunlight absorption and charging efficiency.
• Check Connections: Occasionally inspect the cable connection between the solar panel and the light fixture to ensure it remains secure and free from damage.
• Weather Resistance: The light is IP65 rated, meaning it is protected against dust and water jets. No special weather-proofing is required, but ensure it is securely mounted to withstand strong winds.

5. Troubleshooting

If you encounter issues with your intelamp solar light, refer to the following common solutions:

• Light Not Turning On:
  • Ensure the solar panel is receiving adequate direct sunlight for charging.
  • Check the connection cable between the solar panel and the light fixture.
  • Verify the light is switched ON via the remote control.
  • Allow the light to charge for a full day in direct sunlight before first use.
• Dim or Short-Duration Lighting:
  • Clean the solar panel surface to ensure maximum charging efficiency.
  • Ensure the solar panel is positioned to receive optimal sunlight.
  • Check if the brightness setting on the remote is set to a lower percentage.
  • Consider recent weather conditions; prolonged cloudy days can reduce charge.
• Motion Sensor Not Activating:
  • Ensure the light is in a motion sensor mode (30s, 3m, or 10m).
  • Check for obstructions blocking the sensor's field of view.
  • Test the sensor by walking directly in front of it.

6. Product Specifications

7. Warranty and Support

For warranty information, technical support, or any inquiries regarding your intelamp solar light, please contact intelamp customer service through the retailer where the product was purchased or visit the official intelamp website. Please retain your proof of purchase for warranty claims.