TIMU M10 Portable Bluetooth Speaker

1. Safety Instructions

Please read these safety instructions carefully before using the device. Keep this manual for future reference.

• Do not expose the speaker to extreme temperatures, direct sunlight, or fire.
• Avoid dropping or subjecting the speaker to strong impacts.
• Do not disassemble, repair, or modify the speaker yourself. Contact qualified service personnel for any repairs.
• Keep the speaker away from water and liquids, despite its IPX7 rating, to prevent damage to internal components. Ensure charging port cover is securely closed when near water.
• Use only the provided charging cable or a certified equivalent.
• Do not use abrasive cleaners or solvents on the speaker.
• Keep out of reach of children.
• Dispose of the product responsibly according to local regulations.

2. Package Contents

Verify that all items are present in the package:

• 1 x TIMU M10 Portable Bluetooth Speaker
• 1 x USB Charging Cable
• 1 x AUX Connection Cable
• 1 x Braided Nylon Carrying Strap
• 1 x User Manual (this document)

3. Product Overview

Familiarize yourself with the speaker's components and controls.

Figure 1: TIMU M10 Speaker Diagram (Illustrative)

Control Panel (Top View)

• Power Button: Press and hold to power on/off. Short press to play/pause.
• Volume Down / Previous Track: Short press for volume down. Long press for previous track.
• Volume Up / Next Track: Short press for volume up. Long press for next track.
• Mode Button (M): Short press to switch between Bluetooth, AUX, and TF card modes.
• EQ / Light Button: Short press to cycle through EQ modes (e.g., Bass Boost, Vocal, Standard). Long press to turn RGB lights on/off or change light modes.
• TWS Button: Short press to initiate TWS pairing.

Rear Ports (Under protective cover)

• USB-C Charging Port: For charging the speaker.
• AUX Input: For connecting external audio devices via 3.5mm audio cable.
• TF Card Slot: For playing music directly from a MicroSD/TF card.

4. Setup

Initial Charge

• Before first use, fully charge the speaker. Connect the USB charging cable to the speaker's USB-C port and a 5V USB power adapter (not included).
• The charging indicator light will show charging status (e.g., red for charging, off or green for fully charged).

5. Operating Instructions

5.1 Power On/Off

• To Power On: Press and hold the Power button for approximately 2-3 seconds. You will hear an audible prompt, and the indicator light will flash.
• To Power Off: Press and hold the Power button for approximately 2-3 seconds. You will hear an audible prompt, and the indicator light will turn off.

5.2 Bluetooth Pairing

• Ensure the speaker is powered on and in Bluetooth mode (indicator light will be flashing blue). If not, short press the Mode (M) button to switch to Bluetooth mode.
• On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
• Select "TIMU M10" from the list of devices.
• Once paired, the speaker will emit a confirmation sound, and the blue indicator light will remain solid.
• The speaker will automatically attempt to reconnect to the last paired device when powered on.

5.3 True Wireless Stereo (TWS) Pairing

TWS allows you to connect two TIMU M10 speakers for a stereo sound experience.

• Ensure both TIMU M10 speakers are powered on and not connected to any Bluetooth device.
• On one of the speakers (this will be the primary speaker), short press the TWS button. The speaker will enter TWS pairing mode, indicated by a flashing light.
• The two speakers will automatically connect to each other. Once connected, you will hear a confirmation sound, and the TWS indicator light on both speakers will become solid.
• Now, connect your device to the primary speaker via Bluetooth as described in section 5.2. The audio will play in stereo through both speakers.
• To disconnect TWS, short press the TWS button on either speaker.

5.4 EQ Modes

The speaker features 3 EQ modes to optimize your listening experience.

• Short press the EQ / Light button to cycle through the available EQ modes.
• Each press will switch to the next mode (e.g., Standard, Bass Boost, Vocal). An audible prompt may indicate the current mode.

5.5 RGB Lights

The speaker includes adjustable RGB lights.

• Long press the EQ / Light button to turn the RGB lights on or off, or to cycle through different light patterns/colors.

5.6 AUX Input Mode

• Connect one end of the 3.5mm AUX cable to the speaker's AUX port and the other end to your audio device's headphone jack.
• Short press the Mode (M) button until the speaker enters AUX mode.
• Audio will now play through the speaker from your connected device.

5.7 TF Card Mode

• Insert a MicroSD/TF card (pre-loaded with MP3 audio files) into the TF card slot.
• Short press the Mode (M) button until the speaker enters TF card mode.
• The speaker will automatically begin playing music from the TF card.

6. Charging the Speaker

• When the battery is low, the speaker may emit a low battery warning sound, and the indicator light may flash red.
• Connect the provided USB charging cable to the speaker's USB-C port and a 5V/2A (recommended) USB power adapter.
• The charging indicator light will illuminate (e.g., red) during charging.
• Once fully charged (approximately 3-4 hours), the indicator light will change (e.g., turn off or green).
• A full charge provides up to 30 hours of playtime at 50% volume. Actual battery life may vary based on volume level and audio content.

7. Maintenance

• Cleaning: Use a soft, dry, lint-free cloth to clean the speaker. Do not use harsh chemicals, cleaning solvents, or strong detergents.
• Storage: When not in use for extended periods, store the speaker in a cool, dry place. It is recommended to charge the battery at least once every three months to maintain battery health.
• Water Resistance: The speaker is IPX7 water-resistant, meaning it can be submerged in up to 1 meter of water for 30 minutes. Ensure the charging port cover is securely sealed before exposure to water. This rating does not protect against saltwater or other liquids.

8. Troubleshooting

If you encounter issues, refer to the following common problems and solutions:

9. Specifications

10. Warranty and Support

The TIMU M10 Portable Bluetooth Speaker comes with a 2-year limited warranty from the date of purchase.

This warranty covers manufacturing defects in materials and workmanship. It does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear.

For warranty claims or technical support, please contact TIMU customer service through the retailer where the product was purchased or visit the official TIMU website for contact information.

Please retain your proof of purchase for warranty service.