Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Polibi Velvet Upholstered Floor Platform Bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Safety Information
- Do not exceed the maximum weight limit of 600 lbs.
- Keep the bed away from cribs, other beds, or furniture to prevent potential entrapment hazards.
- Ensure all bolts and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Assembly should be performed by adults. Keep small parts away from children during assembly.
- Use on a level surface to ensure stability.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Upholstered Headboard with Integrated Shelves
- Bed Frame Side Rails (Velvet Upholstered)
- Center Support Beam
- Wooden Slats
- Hardware Pack (bolts, washers, nuts, Allen wrench)
- Assembly Instructions Manual
Setup and Assembly
Assembly typically requires two adults. A power drill (not included) may expedite the process, but an Allen wrench is provided.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches.
- Attach Headboard Supports: Secure the wooden headboard supports to the main headboard panel using the provided hardware. Ensure they are firmly attached.
- Assemble Bed Frame Sides: Connect the upholstered side rails to the headboard and footboard sections. Ensure all connections are tight.
- Install Center Support: Place the center support beam within the assembled frame and secure it according to the diagrams.
- Position Wooden Slats: Lay the wooden slats across the bed frame, ensuring even spacing. Secure them to the frame using the designated fasteners. The slats are designed to prevent mattress sagging and improve airflow.
- Final Check: Double-check all bolts and connections to ensure they are secure.
Image: King size bed dimensions, illustrating overall length, width, and headboard height. This diagram helps in understanding the scale and fit of the bed in a room.
Image: Close-up view of the integrated bedside shelf, demonstrating its placement and functionality for storing small items.
Operating and Usage
- Mattress Placement: This platform bed is designed for use without a box spring. Place your mattress directly onto the wooden slats.
- Integrated Bedside Shelves: Utilize the built-in shelves on either side of the headboard for convenient storage of small items such as books, mobile phones, or a small lamp.
- Weight Distribution: Ensure weight is distributed evenly across the bed to maintain structural integrity and mattress longevity.
Image: The Polibi King size platform bed with its velvet upholstery and extended wood headboard, shown in a bedroom environment. This illustrates the bed's overall appearance and how it integrates into a living space.
Maintenance
- Velvet Upholstery Care: Regularly vacuum the velvet fabric using a soft brush attachment to remove dust and debris. For spills, blot immediately with a clean, dry cloth. Avoid rubbing, which can damage the pile. For stubborn stains, consult a professional upholstery cleaner.
- Wood Headboard and Shelves: Wipe wooden surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Hardware Check: Periodically inspect all bolts and fasteners to ensure they remain tight. Re-tighten as needed to maintain stability.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading of the velvet upholstery.
Troubleshooting
- Bed feels wobbly: Ensure all bolts and connections are fully tightened. Check that the bed is on a level surface.
- Squeaking noises: Re-tighten all hardware. Ensure slats are properly seated and not rubbing against the frame.
- Difficulty with assembly: Review the assembly steps and diagrams carefully. Ensure all parts are oriented correctly. If issues persist, contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Polibi |
| Model Number | P19487 |
| Size | King |
| Product Dimensions | 90.6"L x 80.3"W x 30.3"H |
| Upholstery Fabric Type | Velvet |
| Color | Grey |
| Weight Limit | 600 Pounds |
| Item Weight | 145 Pounds |
| Assembly Required | Yes |
| Box Spring Needed | No |
| Included Components | Headboard, Slats |
Image: Front view of the Polibi platform bed frame, showcasing the upholstered headboard and the wooden slat support system.
Image: Side view of the Polibi platform bed frame, highlighting the low-profile design and the wooden slat foundation.
Warranty Information
This product comes with a Limited Warranty. For specific details regarding coverage and duration, please refer to the warranty card included with your purchase or contact Polibi customer support.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Polibi customer support. Refer to the contact information provided in your packaging or visit the official Polibi website.
